fdt: copy FDT data from kernel_args to kernel heap

Change-Id: Id7b18c582357b8eeaa2e6b7956da3db35ebded3a
Reviewed-on: https://review.haiku-os.org/c/haiku/+/6599
Tested-by: Commit checker robot <no-re

fdt: copy FDT data from kernel_args to kernel heap

Change-Id: Id7b18c582357b8eeaa2e6b7956da3db35ebded3a
Reviewed-on: https://review.haiku-os.org/c/haiku/+/6599
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Adrien Destugues <pulkomandy@pulkomandy.tk>

show more ...

fdt: expose FDT data to userland

Change-Id: I05c935735f54874630c641bf8ab7cbd378b71ba0
Reviewed-on: https://review.haiku-os.org/c/haiku/+/6598
Tested-by: Commit checker robot <no-reply+buildbot@haiku

fdt: expose FDT data to userland

Change-Id: I05c935735f54874630c641bf8ab7cbd378b71ba0
Reviewed-on: https://review.haiku-os.org/c/haiku/+/6598
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: Niels Sascha Reedijk <niels.reedijk@gmail.com>

show more ...

fdt: implement '#address-cells', '#size-cells' support

Change-Id: Ic1c1e75b9352d676da6f07ebd05b0491bd41f7a8
Reviewed-on: https://review.haiku-os.org/c/haiku/+/6218
Reviewed-by: Alex von Gluck IV <ka

fdt: implement '#address-cells', '#size-cells' support

Change-Id: Ic1c1e75b9352d676da6f07ebd05b0491bd41f7a8
Reviewed-on: https://review.haiku-os.org/c/haiku/+/6218
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>

show more ...

kernel: Drop non-standard GNU inline assignment syntax

* We needed this previously due to our gcc2 compiled kernel.
* Now that our kernel is always latest gcc, we can move to the
c++20 syntax for

kernel: Drop non-standard GNU inline assignment syntax

* We needed this previously due to our gcc2 compiled kernel.
* Now that our kernel is always latest gcc, we can move to the
c++20 syntax for inline assignment.
* Improves compatibility with clang, less GNU-specific stuff

Change-Id: Ib7272a0a52554a31e9a0e788fd3f031db9049795
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5898
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: Adrien Destugues <pulkomandy@pulkomandy.tk>

show more ...

bus_managers/fdt: register multiple fdt/compatible attrs

Change-Id: I71efa8051d104d4b6a627071cd231c887271eb2e
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5901
Reviewed-by: Adrien Destugues <p

bus_managers/fdt: register multiple fdt/compatible attrs

Change-Id: I71efa8051d104d4b6a627071cd231c887271eb2e
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5901
Reviewed-by: Adrien Destugues <pulkomandy@pulkomandy.tk>

show more ...

arm64: initialize PCI interrupts from FDT

see:
https://www.devicetree.org/open-firmware/practice/imap/imap0_9d.pdf

Change-Id: I4158b022fd4404e3126f92ee844743e39a9b6646
Reviewed-on: https://review.h

arm64: initialize PCI interrupts from FDT

see:
https://www.devicetree.org/open-firmware/practice/imap/imap0_9d.pdf

Change-Id: I4158b022fd4404e3126f92ee844743e39a9b6646
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5560
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: David Karoly <karolyd577@gmail.com>

show more ...

arm: move SPI interrupt offset calculation to FDT code

Most common values for interrupt-cells are 1 or 2.
- one cell: the single cell defines the index of the interrupt
within the controller.
- tw

arm: move SPI interrupt offset calculation to FDT code

Most common values for interrupt-cells are 1 or 2.
- one cell: the single cell defines the index of the interrupt
within the controller.
- two cells: the first cell defines the index of the interrupt
within the controller, while the second cell is specifies
interrupt flags like active-high/active-low, edge triggered
or level-sensitive.

ARM Generic Interrupt Controller uses 3 cells:
- the 1st cell is the interrupt type: 0 for SPI, 1 for PPI
- the 2nd cell contains the interrupt number
- the 3rd cell contains interrupt flags, similarly to the 2-cell format

SPI interrupts are numbered from 0 in the device tree but
they start from 32 on the GIC so an offset should be applied.

On the other hand, ACPI tables contain interrupt numbers
as they are expected by the GIC so no offset should be applied
when interrupts are read from ACPI.

see:
https://www.kernel.org/doc/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
https://www.kernel.org/doc/Documentation/devicetree/bindings/interrupt-controller/arm%2Cgic.txt
https://developer.arm.com/documentation/198123/0301/Arm-CoreLink-GIC-fundamentals

Change-Id: Ia41371bd965347f89c17d62e391480d7b2083bae
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5490
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Adrien Destugues <pulkomandy@pulkomandy.tk>

show more ...