xref: /haiku/src/add-ons/kernel/drivers/network/ether/dec21xxx/dev/de/if_de.c (revision df49d6c9348d4b595dd76333bb06404c57f582b7)
1 /*	$NetBSD: if_de.c,v 1.86 1999/06/01 19:17:59 thorpej Exp $	*/
2 /*-
3  * SPDX-License-Identifier: BSD-2-Clause-NetBSD
4  *
5  * Copyright (c) 1994-1997 Matt Thomas (matt@3am-software.com)
6  * All rights reserved.
7  *
8  * Redistribution and use in source and binary forms, with or without
9  * modification, are permitted provided that the following conditions
10  * are met:
11  * 1. Redistributions of source code must retain the above copyright
12  *    notice, this list of conditions and the following disclaimer.
13  * 2. The name of the author may not be used to endorse or promote products
14  *    derived from this software without specific prior written permission
15  *
16  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
17  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
18  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
19  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
20  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
21  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
22  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
23  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
24  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
25  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
26  *
27  * Id: if_de.c,v 1.94 1997/07/03 16:55:07 thomas Exp
28  */
29 
30 /*
31  * DEC 21040 PCI Ethernet Controller
32  *
33  * Written by Matt Thomas
34  * BPF support code stolen directly from if_ec.c
35  *
36  *   This driver supports the DEC DE435 or any other PCI
37  *   board which support 21040, 21041, or 21140 (mostly).
38  */
39 
40 #include <sys/cdefs.h>
41 __FBSDID("$FreeBSD: releng/12.0/sys/dev/de/if_de.c 339735 2018-10-25 17:00:39Z brooks $");
42 
43 #define	TULIP_HDR_DATA
44 
45 #include <sys/param.h>
46 #include <sys/systm.h>
47 #include <sys/endian.h>
48 #include <sys/ktr.h>
49 #include <sys/mbuf.h>
50 #include <sys/socket.h>
51 #include <sys/sockio.h>
52 #include <sys/malloc.h>
53 #include <sys/kernel.h>
54 #include <sys/module.h>
55 #include <sys/eventhandler.h>
56 #include <machine/bus.h>
57 #include <machine/bus_dma.h>
58 #include <machine/resource.h>
59 #include <sys/bus.h>
60 #include <sys/rman.h>
61 
62 #include <net/if.h>
63 #include <net/if_var.h>
64 #include <net/if_arp.h>
65 #include <net/ethernet.h>
66 #include <net/if_media.h>
67 #include <net/if_types.h>
68 #include <net/if_dl.h>
69 
70 #include <net/bpf.h>
71 
72 #ifdef INET
73 #include <netinet/in.h>
74 #include <netinet/if_ether.h>
75 #endif
76 
77 #include <vm/vm.h>
78 
79 #include <net/if_var.h>
80 #include <vm/pmap.h>
81 #include <dev/pci/pcivar.h>
82 #include <dev/pci/pcireg.h>
83 #include <dev/de/dc21040reg.h>
84 
85 #ifdef DDB
86 #include <ddb/ddb.h>
87 #endif
88 
89 /*
90  * Intel CPUs should use I/O mapped access.
91  */
92 #if defined(__i386__)
93 #define	TULIP_IOMAPPED
94 #endif
95 
96 #if 0
97 /* This enables KTR traces at KTR_DEV. */
98 #define	KTR_TULIP	KTR_DEV
99 #else
100 #define	KTR_TULIP	0
101 #endif
102 
103 #if 0
104 /*
105  * This turns on all sort of debugging stuff and make the
106  * driver much larger.
107  */
108 #define TULIP_DEBUG
109 #endif
110 
111 #if 0
112 #define	TULIP_PERFSTATS
113 #endif
114 
115 #define	TULIP_HZ	10
116 
117 #include <dev/de/if_devar.h>
118 
119 #define	SYNC_NONE	0
120 #define	SYNC_RX		1
121 #define	SYNC_TX		2
122 
123 /*
124  * This module supports
125  *	the DEC 21040 PCI Ethernet Controller.
126  *	the DEC 21041 PCI Ethernet Controller.
127  *	the DEC 21140 PCI Fast Ethernet Controller.
128  */
129 static void	tulip_addr_filter(tulip_softc_t * const sc);
130 static int	tulip_ifmedia_change(struct ifnet * const ifp);
131 static void	tulip_ifmedia_status(struct ifnet * const ifp,
132 		    struct ifmediareq *req);
133 static void	tulip_init(void *);
134 static void	tulip_init_locked(tulip_softc_t * const sc);
135 static void	tulip_intr_shared(void *arg);
136 static void	tulip_intr_normal(void *arg);
137 static void	tulip_mii_autonegotiate(tulip_softc_t * const sc,
138 		    const unsigned phyaddr);
139 static int	tulip_mii_map_abilities(tulip_softc_t * const sc,
140 		    unsigned abilities);
141 static tulip_media_t
142 		tulip_mii_phy_readspecific(tulip_softc_t * const sc);
143 static unsigned	tulip_mii_readreg(tulip_softc_t * const sc, unsigned devaddr,
144 		    unsigned regno);
145 static void	tulip_mii_writereg(tulip_softc_t * const sc, unsigned devaddr,
146 		    unsigned regno, unsigned data);
147 static void	tulip_reset(tulip_softc_t * const sc);
148 static void	tulip_rx_intr(tulip_softc_t * const sc);
149 static int	tulip_srom_decode(tulip_softc_t * const sc);
150 static void	tulip_start(struct ifnet *ifp);
151 static void	tulip_start_locked(tulip_softc_t * const sc);
152 static struct mbuf *
153 		tulip_txput(tulip_softc_t * const sc, struct mbuf *m);
154 static void	tulip_txput_setup(tulip_softc_t * const sc);
155 static void	tulip_watchdog(void *arg);
156 struct mbuf *	tulip_dequeue_mbuf(tulip_ringinfo_t *ri, tulip_descinfo_t *di,
157 		    int sync);
158 static void	tulip_dma_map_addr(void *, bus_dma_segment_t *, int, int);
159 static void	tulip_dma_map_rxbuf(void *, bus_dma_segment_t *, int,
160 		    bus_size_t, int);
161 
162 static void
tulip_dma_map_addr(void * arg,bus_dma_segment_t * segs,int nseg,int error)163 tulip_dma_map_addr(void *arg, bus_dma_segment_t *segs, int nseg, int error)
164 {
165     bus_addr_t *paddr;
166 
167     if (error)
168 	return;
169 
170     paddr = arg;
171     *paddr = segs->ds_addr;
172 }
173 
174 static void
tulip_dma_map_rxbuf(void * arg,bus_dma_segment_t * segs,int nseg,bus_size_t mapsize,int error)175 tulip_dma_map_rxbuf(void *arg, bus_dma_segment_t *segs, int nseg,
176     bus_size_t mapsize, int error)
177 {
178     tulip_desc_t *desc;
179 
180     if (error)
181 	return;
182 
183     desc = arg;
184     KASSERT(nseg == 1, ("too many DMA segments"));
185     KASSERT(segs[0].ds_len >= TULIP_RX_BUFLEN, ("receive buffer too small"));
186 
187     desc->d_addr1 = segs[0].ds_addr & 0xffffffff;
188     desc->d_length1 = TULIP_RX_BUFLEN;
189 #ifdef not_needed
190     /* These should already always be zero. */
191     desc->d_addr2 = 0;
192     desc->d_length2 = 0;
193 #endif
194 }
195 
196 struct mbuf *
tulip_dequeue_mbuf(tulip_ringinfo_t * ri,tulip_descinfo_t * di,int sync)197 tulip_dequeue_mbuf(tulip_ringinfo_t *ri, tulip_descinfo_t *di, int sync)
198 {
199     struct mbuf *m;
200 
201     m = di->di_mbuf;
202     if (m != NULL) {
203 	switch (sync) {
204 	case SYNC_NONE:
205 	    break;
206 	case SYNC_RX:
207 	    TULIP_RXMAP_POSTSYNC(ri, di);
208 	    break;
209 	case SYNC_TX:
210 	    TULIP_TXMAP_POSTSYNC(ri, di);
211 	    break;
212 	default:
213 	    panic("bad sync flag: %d", sync);
214 	}
215 	bus_dmamap_unload(ri->ri_data_tag, *di->di_map);
216 	di->di_mbuf = NULL;
217     }
218     return (m);
219 }
220 
221 static void
tulip_timeout_callback(void * arg)222 tulip_timeout_callback(void *arg)
223 {
224     tulip_softc_t * const sc = arg;
225 
226     TULIP_PERFSTART(timeout)
227     TULIP_LOCK_ASSERT(sc);
228 
229     sc->tulip_flags &= ~TULIP_TIMEOUTPENDING;
230     sc->tulip_probe_timeout -= 1000 / TULIP_HZ;
231     (sc->tulip_boardsw->bd_media_poll)(sc, TULIP_MEDIAPOLL_TIMER);
232 
233     TULIP_PERFEND(timeout);
234 }
235 
236 static void
tulip_timeout(tulip_softc_t * const sc)237 tulip_timeout(tulip_softc_t * const sc)
238 {
239     TULIP_LOCK_ASSERT(sc);
240     if (sc->tulip_flags & TULIP_TIMEOUTPENDING)
241 	return;
242     sc->tulip_flags |= TULIP_TIMEOUTPENDING;
243     callout_reset(&sc->tulip_callout, (hz + TULIP_HZ / 2) / TULIP_HZ,
244 	tulip_timeout_callback, sc);
245 }
246 
247 static int
tulip_txprobe(tulip_softc_t * const sc)248 tulip_txprobe(tulip_softc_t * const sc)
249 {
250     struct mbuf *m;
251     u_char *enaddr;
252 
253     /*
254      * Before we are sure this is the right media we need
255      * to send a small packet to make sure there's carrier.
256      * Strangely, BNC and AUI will "see" receive data if
257      * either is connected so the transmit is the only way
258      * to verify the connectivity.
259      */
260     TULIP_LOCK_ASSERT(sc);
261     MGETHDR(m, M_NOWAIT, MT_DATA);
262     if (m == NULL)
263 	return 0;
264     /*
265      * Construct a LLC TEST message which will point to ourselves.
266      */
267     if (sc->tulip_ifp->if_input != NULL)
268 	enaddr = IF_LLADDR(sc->tulip_ifp);
269     else
270 	enaddr = sc->tulip_enaddr;
271     bcopy(enaddr, mtod(m, struct ether_header *)->ether_dhost, ETHER_ADDR_LEN);
272     bcopy(enaddr, mtod(m, struct ether_header *)->ether_shost, ETHER_ADDR_LEN);
273     mtod(m, struct ether_header *)->ether_type = htons(3);
274     mtod(m, unsigned char *)[14] = 0;
275     mtod(m, unsigned char *)[15] = 0;
276     mtod(m, unsigned char *)[16] = 0xE3;	/* LLC Class1 TEST (no poll) */
277     m->m_len = m->m_pkthdr.len = sizeof(struct ether_header) + 3;
278     /*
279      * send it!
280      */
281     sc->tulip_cmdmode |= TULIP_CMD_TXRUN;
282     sc->tulip_intrmask |= TULIP_STS_TXINTR;
283     sc->tulip_flags |= TULIP_TXPROBE_ACTIVE;
284     TULIP_CSR_WRITE(sc, csr_command, sc->tulip_cmdmode);
285     TULIP_CSR_WRITE(sc, csr_intr, sc->tulip_intrmask);
286     if ((m = tulip_txput(sc, m)) != NULL)
287 	m_freem(m);
288     sc->tulip_probe.probe_txprobes++;
289     return 1;
290 }
291 
292 static void
tulip_media_set(tulip_softc_t * const sc,tulip_media_t media)293 tulip_media_set(tulip_softc_t * const sc, tulip_media_t media)
294 {
295     const tulip_media_info_t *mi = sc->tulip_mediums[media];
296 
297     TULIP_LOCK_ASSERT(sc);
298     if (mi == NULL)
299 	return;
300 
301     /*
302      * If we are switching media, make sure we don't think there's
303      * any stale RX activity
304      */
305     sc->tulip_flags &= ~TULIP_RXACT;
306     if (mi->mi_type == TULIP_MEDIAINFO_SIA) {
307 	TULIP_CSR_WRITE(sc, csr_sia_connectivity, TULIP_SIACONN_RESET);
308 	TULIP_CSR_WRITE(sc, csr_sia_tx_rx,        mi->mi_sia_tx_rx);
309 	if (sc->tulip_features & TULIP_HAVE_SIAGP) {
310 	    TULIP_CSR_WRITE(sc, csr_sia_general,  mi->mi_sia_gp_control|mi->mi_sia_general);
311 	    DELAY(50);
312 	    TULIP_CSR_WRITE(sc, csr_sia_general,  mi->mi_sia_gp_data|mi->mi_sia_general);
313 	} else {
314 	    TULIP_CSR_WRITE(sc, csr_sia_general,  mi->mi_sia_general);
315 	}
316 	TULIP_CSR_WRITE(sc, csr_sia_connectivity, mi->mi_sia_connectivity);
317     } else if (mi->mi_type == TULIP_MEDIAINFO_GPR) {
318 #define	TULIP_GPR_CMDBITS	(TULIP_CMD_PORTSELECT|TULIP_CMD_PCSFUNCTION|TULIP_CMD_SCRAMBLER|TULIP_CMD_TXTHRSHLDCTL)
319 	/*
320 	 * If the cmdmode bits don't match the currently operating mode,
321 	 * set the cmdmode appropriately and reset the chip.
322 	 */
323 	if (((mi->mi_cmdmode ^ TULIP_CSR_READ(sc, csr_command)) & TULIP_GPR_CMDBITS) != 0) {
324 	    sc->tulip_cmdmode &= ~TULIP_GPR_CMDBITS;
325 	    sc->tulip_cmdmode |= mi->mi_cmdmode;
326 	    tulip_reset(sc);
327 	}
328 	TULIP_CSR_WRITE(sc, csr_gp, TULIP_GP_PINSET|sc->tulip_gpinit);
329 	DELAY(10);
330 	TULIP_CSR_WRITE(sc, csr_gp, (u_int8_t) mi->mi_gpdata);
331     } else if (mi->mi_type == TULIP_MEDIAINFO_SYM) {
332 	/*
333 	 * If the cmdmode bits don't match the currently operating mode,
334 	 * set the cmdmode appropriately and reset the chip.
335 	 */
336 	if (((mi->mi_cmdmode ^ TULIP_CSR_READ(sc, csr_command)) & TULIP_GPR_CMDBITS) != 0) {
337 	    sc->tulip_cmdmode &= ~TULIP_GPR_CMDBITS;
338 	    sc->tulip_cmdmode |= mi->mi_cmdmode;
339 	    tulip_reset(sc);
340 	}
341 	TULIP_CSR_WRITE(sc, csr_sia_general, mi->mi_gpcontrol);
342 	TULIP_CSR_WRITE(sc, csr_sia_general, mi->mi_gpdata);
343     } else if (mi->mi_type == TULIP_MEDIAINFO_MII
344 	       && sc->tulip_probe_state != TULIP_PROBE_INACTIVE) {
345 	int idx;
346 	if (sc->tulip_features & TULIP_HAVE_SIAGP) {
347 	    const u_int8_t *dp;
348 	    dp = &sc->tulip_rombuf[mi->mi_reset_offset];
349 	    for (idx = 0; idx < mi->mi_reset_length; idx++, dp += 2) {
350 		DELAY(10);
351 		TULIP_CSR_WRITE(sc, csr_sia_general, (dp[0] + 256 * dp[1]) << 16);
352 	    }
353 	    sc->tulip_phyaddr = mi->mi_phyaddr;
354 	    dp = &sc->tulip_rombuf[mi->mi_gpr_offset];
355 	    for (idx = 0; idx < mi->mi_gpr_length; idx++, dp += 2) {
356 		DELAY(10);
357 		TULIP_CSR_WRITE(sc, csr_sia_general, (dp[0] + 256 * dp[1]) << 16);
358 	    }
359 	} else {
360 	    for (idx = 0; idx < mi->mi_reset_length; idx++) {
361 		DELAY(10);
362 		TULIP_CSR_WRITE(sc, csr_gp, sc->tulip_rombuf[mi->mi_reset_offset + idx]);
363 	    }
364 	    sc->tulip_phyaddr = mi->mi_phyaddr;
365 	    for (idx = 0; idx < mi->mi_gpr_length; idx++) {
366 		DELAY(10);
367 		TULIP_CSR_WRITE(sc, csr_gp, sc->tulip_rombuf[mi->mi_gpr_offset + idx]);
368 	    }
369 	}
370 	if (sc->tulip_flags & TULIP_TRYNWAY) {
371 	    tulip_mii_autonegotiate(sc, sc->tulip_phyaddr);
372 	} else if ((sc->tulip_flags & TULIP_DIDNWAY) == 0) {
373 	    u_int32_t data = tulip_mii_readreg(sc, sc->tulip_phyaddr, PHYREG_CONTROL);
374 	    data &= ~(PHYCTL_SELECT_100MB|PHYCTL_FULL_DUPLEX|PHYCTL_AUTONEG_ENABLE);
375 	    sc->tulip_flags &= ~TULIP_DIDNWAY;
376 	    if (TULIP_IS_MEDIA_FD(media))
377 		data |= PHYCTL_FULL_DUPLEX;
378 	    if (TULIP_IS_MEDIA_100MB(media))
379 		data |= PHYCTL_SELECT_100MB;
380 	    tulip_mii_writereg(sc, sc->tulip_phyaddr, PHYREG_CONTROL, data);
381 	}
382     }
383 }
384 
385 static void
tulip_linkup(tulip_softc_t * const sc,tulip_media_t media)386 tulip_linkup(tulip_softc_t * const sc, tulip_media_t media)
387 {
388     TULIP_LOCK_ASSERT(sc);
389     if ((sc->tulip_flags & TULIP_LINKUP) == 0)
390 	sc->tulip_flags |= TULIP_PRINTLINKUP;
391     sc->tulip_flags |= TULIP_LINKUP;
392     sc->tulip_ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
393 #if 0 /* XXX how does with work with ifmedia? */
394     if ((sc->tulip_flags & TULIP_DIDNWAY) == 0) {
395 	if (sc->tulip_ifp->if_flags & IFF_FULLDUPLEX) {
396 	    if (TULIP_CAN_MEDIA_FD(media)
397 		    && sc->tulip_mediums[TULIP_FD_MEDIA_OF(media)] != NULL)
398 		media = TULIP_FD_MEDIA_OF(media);
399 	} else {
400 	    if (TULIP_IS_MEDIA_FD(media)
401 		    && sc->tulip_mediums[TULIP_HD_MEDIA_OF(media)] != NULL)
402 		media = TULIP_HD_MEDIA_OF(media);
403 	}
404     }
405 #endif
406     if (sc->tulip_media != media) {
407 #ifdef TULIP_DEBUG
408 	sc->tulip_dbg.dbg_last_media = sc->tulip_media;
409 #endif
410 	sc->tulip_media = media;
411 	sc->tulip_flags |= TULIP_PRINTMEDIA;
412 	if (TULIP_IS_MEDIA_FD(sc->tulip_media)) {
413 	    sc->tulip_cmdmode |= TULIP_CMD_FULLDUPLEX;
414 	} else if (sc->tulip_chipid != TULIP_21041 || (sc->tulip_flags & TULIP_DIDNWAY) == 0) {
415 	    sc->tulip_cmdmode &= ~TULIP_CMD_FULLDUPLEX;
416 	}
417     }
418     /*
419      * We could set probe_timeout to 0 but setting to 3000 puts this
420      * in one central place and the only matters is tulip_link is
421      * followed by a tulip_timeout.  Therefore setting it should not
422      * result in aberrant behaviour.
423      */
424     sc->tulip_probe_timeout = 3000;
425     sc->tulip_probe_state = TULIP_PROBE_INACTIVE;
426     sc->tulip_flags &= ~(TULIP_TXPROBE_ACTIVE|TULIP_TRYNWAY);
427     if (sc->tulip_flags & TULIP_INRESET) {
428 	tulip_media_set(sc, sc->tulip_media);
429     } else if (sc->tulip_probe_media != sc->tulip_media) {
430 	/*
431 	 * No reason to change media if we have the right media.
432 	 */
433 	tulip_reset(sc);
434     }
435     tulip_init_locked(sc);
436 }
437 
438 static void
tulip_media_print(tulip_softc_t * const sc)439 tulip_media_print(tulip_softc_t * const sc)
440 {
441 
442     TULIP_LOCK_ASSERT(sc);
443     if ((sc->tulip_flags & TULIP_LINKUP) == 0)
444 	return;
445     if (sc->tulip_flags & TULIP_PRINTMEDIA) {
446 	device_printf(sc->tulip_dev, "enabling %s port\n",
447 	    tulip_mediums[sc->tulip_media]);
448 	sc->tulip_flags &= ~(TULIP_PRINTMEDIA|TULIP_PRINTLINKUP);
449     } else if (sc->tulip_flags & TULIP_PRINTLINKUP) {
450 	device_printf(sc->tulip_dev, "link up\n");
451 	sc->tulip_flags &= ~TULIP_PRINTLINKUP;
452     }
453 }
454 
455 #if defined(TULIP_DO_GPR_SENSE)
456 static tulip_media_t
tulip_21140_gpr_media_sense(tulip_softc_t * const sc)457 tulip_21140_gpr_media_sense(tulip_softc_t * const sc)
458 {
459     struct ifnet *ifp sc->tulip_ifp;
460     tulip_media_t maybe_media = TULIP_MEDIA_UNKNOWN;
461     tulip_media_t last_media = TULIP_MEDIA_UNKNOWN;
462     tulip_media_t media;
463 
464     TULIP_LOCK_ASSERT(sc);
465 
466     /*
467      * If one of the media blocks contained a default media flag,
468      * use that.
469      */
470     for (media = TULIP_MEDIA_UNKNOWN; media < TULIP_MEDIA_MAX; media++) {
471 	const tulip_media_info_t *mi;
472 	/*
473 	 * Media is not supported (or is full-duplex).
474 	 */
475 	if ((mi = sc->tulip_mediums[media]) == NULL || TULIP_IS_MEDIA_FD(media))
476 	    continue;
477 	if (mi->mi_type != TULIP_MEDIAINFO_GPR)
478 	    continue;
479 
480 	/*
481 	 * Remember the media is this is the "default" media.
482 	 */
483 	if (mi->mi_default && maybe_media == TULIP_MEDIA_UNKNOWN)
484 	    maybe_media = media;
485 
486 	/*
487 	 * No activity mask?  Can't see if it is active if there's no mask.
488 	 */
489 	if (mi->mi_actmask == 0)
490 	    continue;
491 
492 	/*
493 	 * Does the activity data match?
494 	 */
495 	if ((TULIP_CSR_READ(sc, csr_gp) & mi->mi_actmask) != mi->mi_actdata)
496 	    continue;
497 
498 #if defined(TULIP_DEBUG)
499 	device_printf(sc->tulip_dev, "%s: %s: 0x%02x & 0x%02x == 0x%02x\n",
500 	    __func__, tulip_mediums[media], TULIP_CSR_READ(sc, csr_gp) & 0xFF,
501 	    mi->mi_actmask, mi->mi_actdata);
502 #endif
503 	/*
504 	 * It does!  If this is the first media we detected, then
505 	 * remember this media.  If isn't the first, then there were
506 	 * multiple matches which we equate to no match (since we don't
507 	 * which to select (if any).
508 	 */
509 	if (last_media == TULIP_MEDIA_UNKNOWN) {
510 	    last_media = media;
511 	} else if (last_media != media) {
512 	    last_media = TULIP_MEDIA_UNKNOWN;
513 	}
514     }
515     return (last_media != TULIP_MEDIA_UNKNOWN) ? last_media : maybe_media;
516 }
517 #endif /* TULIP_DO_GPR_SENSE */
518 
519 static tulip_link_status_t
tulip_media_link_monitor(tulip_softc_t * const sc)520 tulip_media_link_monitor(tulip_softc_t * const sc)
521 {
522     const tulip_media_info_t * const mi = sc->tulip_mediums[sc->tulip_media];
523     tulip_link_status_t linkup = TULIP_LINK_DOWN;
524 
525     TULIP_LOCK_ASSERT(sc);
526     if (mi == NULL) {
527 #if defined(DIAGNOSTIC) || defined(TULIP_DEBUG)
528 	panic("tulip_media_link_monitor: %s: botch at line %d\n",
529 	      tulip_mediums[sc->tulip_media],__LINE__);
530 #else
531 	return TULIP_LINK_UNKNOWN;
532 #endif
533     }
534 
535 
536     /*
537      * Have we seen some packets?  If so, the link must be good.
538      */
539     if ((sc->tulip_flags & (TULIP_RXACT|TULIP_LINKUP)) == (TULIP_RXACT|TULIP_LINKUP)) {
540 	sc->tulip_flags &= ~TULIP_RXACT;
541 	sc->tulip_probe_timeout = 3000;
542 	return TULIP_LINK_UP;
543     }
544 
545     sc->tulip_flags &= ~TULIP_RXACT;
546     if (mi->mi_type == TULIP_MEDIAINFO_MII) {
547 	u_int32_t status;
548 	/*
549 	 * Read the PHY status register.
550 	 */
551 	status = tulip_mii_readreg(sc, sc->tulip_phyaddr, PHYREG_STATUS);
552 	if (status & PHYSTS_AUTONEG_DONE) {
553 	    /*
554 	     * If the PHY has completed autonegotiation, see the if the
555 	     * remote systems abilities have changed.  If so, upgrade or
556 	     * downgrade as appropriate.
557 	     */
558 	    u_int32_t abilities = tulip_mii_readreg(sc, sc->tulip_phyaddr, PHYREG_AUTONEG_ABILITIES);
559 	    abilities = (abilities << 6) & status;
560 	    if (abilities != sc->tulip_abilities) {
561 #if defined(TULIP_DEBUG)
562 		loudprintf("%s(phy%d): autonegotiation changed: 0x%04x -> 0x%04x\n",
563 			   ifp->if_xname, sc->tulip_phyaddr,
564 			   sc->tulip_abilities, abilities);
565 #endif
566 		if (tulip_mii_map_abilities(sc, abilities)) {
567 		    tulip_linkup(sc, sc->tulip_probe_media);
568 		    return TULIP_LINK_UP;
569 		}
570 		/*
571 		 * if we had selected media because of autonegotiation,
572 		 * we need to probe for the new media.
573 		 */
574 		sc->tulip_probe_state = TULIP_PROBE_INACTIVE;
575 		if (sc->tulip_flags & TULIP_DIDNWAY)
576 		    return TULIP_LINK_DOWN;
577 	    }
578 	}
579 	/*
580 	 * The link is now up.  If was down, say its back up.
581 	 */
582 	if ((status & (PHYSTS_LINK_UP|PHYSTS_REMOTE_FAULT)) == PHYSTS_LINK_UP)
583 	    linkup = TULIP_LINK_UP;
584     } else if (mi->mi_type == TULIP_MEDIAINFO_GPR) {
585 	/*
586 	 * No activity sensor?  Assume all's well.
587 	 */
588 	if (mi->mi_actmask == 0)
589 	    return TULIP_LINK_UNKNOWN;
590 	/*
591 	 * Does the activity data match?
592 	 */
593 	if ((TULIP_CSR_READ(sc, csr_gp) & mi->mi_actmask) == mi->mi_actdata)
594 	    linkup = TULIP_LINK_UP;
595     } else if (mi->mi_type == TULIP_MEDIAINFO_SIA) {
596 	/*
597 	 * Assume non TP ok for now.
598 	 */
599 	if (!TULIP_IS_MEDIA_TP(sc->tulip_media))
600 	    return TULIP_LINK_UNKNOWN;
601 	if ((TULIP_CSR_READ(sc, csr_sia_status) & TULIP_SIASTS_LINKFAIL) == 0)
602 	    linkup = TULIP_LINK_UP;
603 #if defined(TULIP_DEBUG)
604 	if (sc->tulip_probe_timeout <= 0)
605 	    device_printf(sc->tulip_dev, "sia status = 0x%08x\n",
606 		    TULIP_CSR_READ(sc, csr_sia_status));
607 #endif
608     } else if (mi->mi_type == TULIP_MEDIAINFO_SYM) {
609 	return TULIP_LINK_UNKNOWN;
610     }
611     /*
612      * We will wait for 3 seconds until the link goes into suspect mode.
613      */
614     if (sc->tulip_flags & TULIP_LINKUP) {
615 	if (linkup == TULIP_LINK_UP)
616 	    sc->tulip_probe_timeout = 3000;
617 	if (sc->tulip_probe_timeout > 0)
618 	    return TULIP_LINK_UP;
619 
620 	sc->tulip_flags &= ~TULIP_LINKUP;
621 	device_printf(sc->tulip_dev, "link down: cable problem?\n");
622     }
623 #if defined(TULIP_DEBUG)
624     sc->tulip_dbg.dbg_link_downed++;
625 #endif
626     return TULIP_LINK_DOWN;
627 }
628 
629 static void
tulip_media_poll(tulip_softc_t * const sc,tulip_mediapoll_event_t event)630 tulip_media_poll(tulip_softc_t * const sc, tulip_mediapoll_event_t event)
631 {
632 
633     TULIP_LOCK_ASSERT(sc);
634 #if defined(TULIP_DEBUG)
635     sc->tulip_dbg.dbg_events[event]++;
636 #endif
637     if (sc->tulip_probe_state == TULIP_PROBE_INACTIVE
638 	    && event == TULIP_MEDIAPOLL_TIMER) {
639 	switch (tulip_media_link_monitor(sc)) {
640 	    case TULIP_LINK_DOWN: {
641 		/*
642 		 * Link Monitor failed.  Probe for new media.
643 		 */
644 		event = TULIP_MEDIAPOLL_LINKFAIL;
645 		break;
646 	    }
647 	    case TULIP_LINK_UP: {
648 		/*
649 		 * Check again soon.
650 		 */
651 		tulip_timeout(sc);
652 		return;
653 	    }
654 	    case TULIP_LINK_UNKNOWN: {
655 		/*
656 		 * We can't tell so don't bother.
657 		 */
658 		return;
659 	    }
660 	}
661     }
662 
663     if (event == TULIP_MEDIAPOLL_LINKFAIL) {
664 	if (sc->tulip_probe_state == TULIP_PROBE_INACTIVE) {
665 	    if (TULIP_DO_AUTOSENSE(sc)) {
666 #if defined(TULIP_DEBUG)
667 		sc->tulip_dbg.dbg_link_failures++;
668 #endif
669 		sc->tulip_media = TULIP_MEDIA_UNKNOWN;
670 		if (sc->tulip_ifp->if_flags & IFF_UP)
671 		    tulip_reset(sc);	/* restart probe */
672 	    }
673 	    return;
674 	}
675 #if defined(TULIP_DEBUG)
676 	sc->tulip_dbg.dbg_link_pollintrs++;
677 #endif
678     }
679 
680     if (event == TULIP_MEDIAPOLL_START) {
681 	sc->tulip_ifp->if_drv_flags |= IFF_DRV_OACTIVE;
682 	if (sc->tulip_probe_state != TULIP_PROBE_INACTIVE)
683 	    return;
684 	sc->tulip_probe_mediamask = 0;
685 	sc->tulip_probe_passes = 0;
686 #if defined(TULIP_DEBUG)
687 	sc->tulip_dbg.dbg_media_probes++;
688 #endif
689 	/*
690 	 * If the SROM contained an explicit media to use, use it.
691 	 */
692 	sc->tulip_cmdmode &= ~(TULIP_CMD_RXRUN|TULIP_CMD_FULLDUPLEX);
693 	sc->tulip_flags |= TULIP_TRYNWAY|TULIP_PROBE1STPASS;
694 	sc->tulip_flags &= ~(TULIP_DIDNWAY|TULIP_PRINTMEDIA|TULIP_PRINTLINKUP);
695 	/*
696 	 * connidx is defaulted to a media_unknown type.
697 	 */
698 	sc->tulip_probe_media = tulip_srom_conninfo[sc->tulip_connidx].sc_media;
699 	if (sc->tulip_probe_media != TULIP_MEDIA_UNKNOWN) {
700 	    tulip_linkup(sc, sc->tulip_probe_media);
701 	    tulip_timeout(sc);
702 	    return;
703 	}
704 
705 	if (sc->tulip_features & TULIP_HAVE_GPR) {
706 	    sc->tulip_probe_state = TULIP_PROBE_GPRTEST;
707 	    sc->tulip_probe_timeout = 2000;
708 	} else {
709 	    sc->tulip_probe_media = TULIP_MEDIA_MAX;
710 	    sc->tulip_probe_timeout = 0;
711 	    sc->tulip_probe_state = TULIP_PROBE_MEDIATEST;
712 	}
713     }
714 
715     /*
716      * Ignore txprobe failures or spurious callbacks.
717      */
718     if (event == TULIP_MEDIAPOLL_TXPROBE_FAILED
719 	    && sc->tulip_probe_state != TULIP_PROBE_MEDIATEST) {
720 	sc->tulip_flags &= ~TULIP_TXPROBE_ACTIVE;
721 	return;
722     }
723 
724     /*
725      * If we really transmitted a packet, then that's the media we'll use.
726      */
727     if (event == TULIP_MEDIAPOLL_TXPROBE_OK || event == TULIP_MEDIAPOLL_LINKPASS) {
728 	if (event == TULIP_MEDIAPOLL_LINKPASS) {
729 	    /* XXX Check media status just to be sure */
730 	    sc->tulip_probe_media = TULIP_MEDIA_10BASET;
731 #if defined(TULIP_DEBUG)
732 	} else {
733 	    sc->tulip_dbg.dbg_txprobes_ok[sc->tulip_probe_media]++;
734 #endif
735 	}
736 	tulip_linkup(sc, sc->tulip_probe_media);
737 	tulip_timeout(sc);
738 	return;
739     }
740 
741     if (sc->tulip_probe_state == TULIP_PROBE_GPRTEST) {
742 #if defined(TULIP_DO_GPR_SENSE)
743 	/*
744 	 * Check for media via the general purpose register.
745 	 *
746 	 * Try to sense the media via the GPR.  If the same value
747 	 * occurs 3 times in a row then just use that.
748 	 */
749 	if (sc->tulip_probe_timeout > 0) {
750 	    tulip_media_t new_probe_media = tulip_21140_gpr_media_sense(sc);
751 #if defined(TULIP_DEBUG)
752 	    device_printf(sc->tulip_dev, "%s: gpr sensing = %s\n", __func__,
753 		   tulip_mediums[new_probe_media]);
754 #endif
755 	    if (new_probe_media != TULIP_MEDIA_UNKNOWN) {
756 		if (new_probe_media == sc->tulip_probe_media) {
757 		    if (--sc->tulip_probe_count == 0)
758 			tulip_linkup(sc, sc->tulip_probe_media);
759 		} else {
760 		    sc->tulip_probe_count = 10;
761 		}
762 	    }
763 	    sc->tulip_probe_media = new_probe_media;
764 	    tulip_timeout(sc);
765 	    return;
766 	}
767 #endif /* TULIP_DO_GPR_SENSE */
768 	/*
769 	 * Brute force.  We cycle through each of the media types
770 	 * and try to transmit a packet.
771 	 */
772 	sc->tulip_probe_state = TULIP_PROBE_MEDIATEST;
773 	sc->tulip_probe_media = TULIP_MEDIA_MAX;
774 	sc->tulip_probe_timeout = 0;
775 	tulip_timeout(sc);
776 	return;
777     }
778 
779     if (sc->tulip_probe_state != TULIP_PROBE_MEDIATEST
780 	   && (sc->tulip_features & TULIP_HAVE_MII)) {
781 	tulip_media_t old_media = sc->tulip_probe_media;
782 	tulip_mii_autonegotiate(sc, sc->tulip_phyaddr);
783 	switch (sc->tulip_probe_state) {
784 	    case TULIP_PROBE_FAILED:
785 	    case TULIP_PROBE_MEDIATEST: {
786 		/*
787 		 * Try the next media.
788 		 */
789 		sc->tulip_probe_mediamask |= sc->tulip_mediums[sc->tulip_probe_media]->mi_mediamask;
790 		sc->tulip_probe_timeout = 0;
791 #ifdef notyet
792 		if (sc->tulip_probe_state == TULIP_PROBE_FAILED)
793 		    break;
794 		if (sc->tulip_probe_media != tulip_mii_phy_readspecific(sc))
795 		    break;
796 		sc->tulip_probe_timeout = TULIP_IS_MEDIA_TP(sc->tulip_probe_media) ? 2500 : 300;
797 #endif
798 		break;
799 	    }
800 	    case TULIP_PROBE_PHYAUTONEG: {
801 		return;
802 	    }
803 	    case TULIP_PROBE_INACTIVE: {
804 		/*
805 		 * Only probe if we autonegotiated a media that hasn't failed.
806 		 */
807 		sc->tulip_probe_timeout = 0;
808 		if (sc->tulip_probe_mediamask & TULIP_BIT(sc->tulip_probe_media)) {
809 		    sc->tulip_probe_media = old_media;
810 		    break;
811 		}
812 		tulip_linkup(sc, sc->tulip_probe_media);
813 		tulip_timeout(sc);
814 		return;
815 	    }
816 	    default: {
817 #if defined(DIAGNOSTIC) || defined(TULIP_DEBUG)
818 		panic("tulip_media_poll: botch at line %d\n", __LINE__);
819 #endif
820 		break;
821 	    }
822 	}
823     }
824 
825     if (event == TULIP_MEDIAPOLL_TXPROBE_FAILED) {
826 #if defined(TULIP_DEBUG)
827 	sc->tulip_dbg.dbg_txprobes_failed[sc->tulip_probe_media]++;
828 #endif
829 	sc->tulip_flags &= ~TULIP_TXPROBE_ACTIVE;
830 	return;
831     }
832 
833     /*
834      * switch to another media if we tried this one enough.
835      */
836     if (/* event == TULIP_MEDIAPOLL_TXPROBE_FAILED || */ sc->tulip_probe_timeout <= 0) {
837 #if defined(TULIP_DEBUG)
838 	if (sc->tulip_probe_media == TULIP_MEDIA_UNKNOWN) {
839 	    device_printf(sc->tulip_dev, "poll media unknown!\n");
840 	    sc->tulip_probe_media = TULIP_MEDIA_MAX;
841 	}
842 #endif
843 	/*
844 	 * Find the next media type to check for.  Full Duplex
845 	 * types are not allowed.
846 	 */
847 	do {
848 	    sc->tulip_probe_media -= 1;
849 	    if (sc->tulip_probe_media == TULIP_MEDIA_UNKNOWN) {
850 		if (++sc->tulip_probe_passes == 3) {
851 		    device_printf(sc->tulip_dev,
852 			"autosense failed: cable problem?\n");
853 		    if ((sc->tulip_ifp->if_flags & IFF_UP) == 0) {
854 			sc->tulip_ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
855 			sc->tulip_probe_state = TULIP_PROBE_INACTIVE;
856 			return;
857 		    }
858 		}
859 		sc->tulip_flags ^= TULIP_TRYNWAY;	/* XXX */
860 		sc->tulip_probe_mediamask = 0;
861 		sc->tulip_probe_media = TULIP_MEDIA_MAX - 1;
862 	    }
863 	} while (sc->tulip_mediums[sc->tulip_probe_media] == NULL
864 		 || (sc->tulip_probe_mediamask & TULIP_BIT(sc->tulip_probe_media))
865 		 || TULIP_IS_MEDIA_FD(sc->tulip_probe_media));
866 
867 #if defined(TULIP_DEBUG)
868 	device_printf(sc->tulip_dev, "%s: probing %s\n",
869 	       event == TULIP_MEDIAPOLL_TXPROBE_FAILED ? "txprobe failed" : "timeout",
870 	       tulip_mediums[sc->tulip_probe_media]);
871 #endif
872 	sc->tulip_probe_timeout = TULIP_IS_MEDIA_TP(sc->tulip_probe_media) ? 2500 : 1000;
873 	sc->tulip_probe_state = TULIP_PROBE_MEDIATEST;
874 	sc->tulip_probe.probe_txprobes = 0;
875 	tulip_reset(sc);
876 	tulip_media_set(sc, sc->tulip_probe_media);
877 	sc->tulip_flags &= ~TULIP_TXPROBE_ACTIVE;
878     }
879     tulip_timeout(sc);
880 
881     /*
882      * If this is hanging off a phy, we know are doing NWAY and we have
883      * forced the phy to a specific speed.  Wait for link up before
884      * before sending a packet.
885      */
886     switch (sc->tulip_mediums[sc->tulip_probe_media]->mi_type) {
887 	case TULIP_MEDIAINFO_MII: {
888 	    if (sc->tulip_probe_media != tulip_mii_phy_readspecific(sc))
889 		return;
890 	    break;
891 	}
892 	case TULIP_MEDIAINFO_SIA: {
893 	    if (TULIP_IS_MEDIA_TP(sc->tulip_probe_media)) {
894 		if (TULIP_CSR_READ(sc, csr_sia_status) & TULIP_SIASTS_LINKFAIL)
895 		    return;
896 		tulip_linkup(sc, sc->tulip_probe_media);
897 #ifdef notyet
898 		if (sc->tulip_features & TULIP_HAVE_MII)
899 		    tulip_timeout(sc);
900 #endif
901 		return;
902 	    }
903 	    break;
904 	}
905 	case TULIP_MEDIAINFO_RESET:
906 	case TULIP_MEDIAINFO_SYM:
907 	case TULIP_MEDIAINFO_NONE:
908 	case TULIP_MEDIAINFO_GPR: {
909 	    break;
910 	}
911     }
912     /*
913      * Try to send a packet.
914      */
915     tulip_txprobe(sc);
916 }
917 
918 static void
tulip_media_select(tulip_softc_t * const sc)919 tulip_media_select(tulip_softc_t * const sc)
920 {
921     TULIP_LOCK_ASSERT(sc);
922     if (sc->tulip_features & TULIP_HAVE_GPR) {
923 	TULIP_CSR_WRITE(sc, csr_gp, TULIP_GP_PINSET|sc->tulip_gpinit);
924 	DELAY(10);
925 	TULIP_CSR_WRITE(sc, csr_gp, sc->tulip_gpdata);
926     }
927     /*
928      * If this board has no media, just return
929      */
930     if (sc->tulip_features & TULIP_HAVE_NOMEDIA)
931 	return;
932 
933     if (sc->tulip_media == TULIP_MEDIA_UNKNOWN) {
934 	TULIP_CSR_WRITE(sc, csr_intr, sc->tulip_intrmask);
935 	(*sc->tulip_boardsw->bd_media_poll)(sc, TULIP_MEDIAPOLL_START);
936     } else {
937 	tulip_media_set(sc, sc->tulip_media);
938     }
939 }
940 
941 static void
tulip_21040_mediainfo_init(tulip_softc_t * const sc,tulip_media_t media)942 tulip_21040_mediainfo_init(tulip_softc_t * const sc, tulip_media_t media)
943 {
944     TULIP_LOCK_ASSERT(sc);
945     sc->tulip_cmdmode |= TULIP_CMD_CAPTREFFCT|TULIP_CMD_THRSHLD160
946 	|TULIP_CMD_BACKOFFCTR;
947     sc->tulip_ifp->if_baudrate = 10000000;
948 
949     if (media == TULIP_MEDIA_10BASET || media == TULIP_MEDIA_UNKNOWN) {
950 	TULIP_MEDIAINFO_SIA_INIT(sc, &sc->tulip_mediainfo[0], 21040, 10BASET);
951 	TULIP_MEDIAINFO_SIA_INIT(sc, &sc->tulip_mediainfo[1], 21040, 10BASET_FD);
952 	sc->tulip_intrmask |= TULIP_STS_LINKPASS|TULIP_STS_LINKFAIL;
953     }
954 
955     if (media == TULIP_MEDIA_AUIBNC || media == TULIP_MEDIA_UNKNOWN) {
956 	TULIP_MEDIAINFO_SIA_INIT(sc, &sc->tulip_mediainfo[2], 21040, AUIBNC);
957     }
958 
959     if (media == TULIP_MEDIA_UNKNOWN) {
960 	TULIP_MEDIAINFO_SIA_INIT(sc, &sc->tulip_mediainfo[3], 21040, EXTSIA);
961     }
962 }
963 
964 static void
tulip_21040_media_probe(tulip_softc_t * const sc)965 tulip_21040_media_probe(tulip_softc_t * const sc)
966 {
967     TULIP_LOCK_ASSERT(sc);
968     tulip_21040_mediainfo_init(sc, TULIP_MEDIA_UNKNOWN);
969     return;
970 }
971 
972 static void
tulip_21040_10baset_only_media_probe(tulip_softc_t * const sc)973 tulip_21040_10baset_only_media_probe(tulip_softc_t * const sc)
974 {
975     TULIP_LOCK_ASSERT(sc);
976     tulip_21040_mediainfo_init(sc, TULIP_MEDIA_10BASET);
977     tulip_media_set(sc, TULIP_MEDIA_10BASET);
978     sc->tulip_media = TULIP_MEDIA_10BASET;
979 }
980 
981 static void
tulip_21040_10baset_only_media_select(tulip_softc_t * const sc)982 tulip_21040_10baset_only_media_select(tulip_softc_t * const sc)
983 {
984     TULIP_LOCK_ASSERT(sc);
985     sc->tulip_flags |= TULIP_LINKUP;
986     if (sc->tulip_media == TULIP_MEDIA_10BASET_FD) {
987 	sc->tulip_cmdmode |= TULIP_CMD_FULLDUPLEX;
988 	sc->tulip_flags &= ~TULIP_SQETEST;
989     } else {
990 	sc->tulip_cmdmode &= ~TULIP_CMD_FULLDUPLEX;
991 	sc->tulip_flags |= TULIP_SQETEST;
992     }
993     tulip_media_set(sc, sc->tulip_media);
994 }
995 
996 static void
tulip_21040_auibnc_only_media_probe(tulip_softc_t * const sc)997 tulip_21040_auibnc_only_media_probe(tulip_softc_t * const sc)
998 {
999     TULIP_LOCK_ASSERT(sc);
1000     tulip_21040_mediainfo_init(sc, TULIP_MEDIA_AUIBNC);
1001     sc->tulip_flags |= TULIP_SQETEST|TULIP_LINKUP;
1002     tulip_media_set(sc, TULIP_MEDIA_AUIBNC);
1003     sc->tulip_media = TULIP_MEDIA_AUIBNC;
1004 }
1005 
1006 static void
tulip_21040_auibnc_only_media_select(tulip_softc_t * const sc)1007 tulip_21040_auibnc_only_media_select(tulip_softc_t * const sc)
1008 {
1009     TULIP_LOCK_ASSERT(sc);
1010     tulip_media_set(sc, TULIP_MEDIA_AUIBNC);
1011     sc->tulip_cmdmode &= ~TULIP_CMD_FULLDUPLEX;
1012 }
1013 
1014 static const tulip_boardsw_t tulip_21040_boardsw = {
1015     TULIP_21040_GENERIC,
1016     tulip_21040_media_probe,
1017     tulip_media_select,
1018     tulip_media_poll,
1019 };
1020 
1021 static const tulip_boardsw_t tulip_21040_10baset_only_boardsw = {
1022     TULIP_21040_GENERIC,
1023     tulip_21040_10baset_only_media_probe,
1024     tulip_21040_10baset_only_media_select,
1025     NULL,
1026 };
1027 
1028 static const tulip_boardsw_t tulip_21040_auibnc_only_boardsw = {
1029     TULIP_21040_GENERIC,
1030     tulip_21040_auibnc_only_media_probe,
1031     tulip_21040_auibnc_only_media_select,
1032     NULL,
1033 };
1034 
1035 static void
tulip_21041_mediainfo_init(tulip_softc_t * const sc)1036 tulip_21041_mediainfo_init(tulip_softc_t * const sc)
1037 {
1038     tulip_media_info_t * const mi = sc->tulip_mediainfo;
1039 
1040     TULIP_LOCK_ASSERT(sc);
1041 #ifdef notyet
1042     if (sc->tulip_revinfo >= 0x20) {
1043 	TULIP_MEDIAINFO_SIA_INIT(sc, &mi[0], 21041P2, 10BASET);
1044 	TULIP_MEDIAINFO_SIA_INIT(sc, &mi[1], 21041P2, 10BASET_FD);
1045 	TULIP_MEDIAINFO_SIA_INIT(sc, &mi[0], 21041P2, AUI);
1046 	TULIP_MEDIAINFO_SIA_INIT(sc, &mi[1], 21041P2, BNC);
1047 	return;
1048     }
1049 #endif
1050     TULIP_MEDIAINFO_SIA_INIT(sc, &mi[0], 21041, 10BASET);
1051     TULIP_MEDIAINFO_SIA_INIT(sc, &mi[1], 21041, 10BASET_FD);
1052     TULIP_MEDIAINFO_SIA_INIT(sc, &mi[2], 21041, AUI);
1053     TULIP_MEDIAINFO_SIA_INIT(sc, &mi[3], 21041, BNC);
1054 }
1055 
1056 static void
tulip_21041_media_probe(tulip_softc_t * const sc)1057 tulip_21041_media_probe(tulip_softc_t * const sc)
1058 {
1059     TULIP_LOCK_ASSERT(sc);
1060     sc->tulip_ifp->if_baudrate = 10000000;
1061     sc->tulip_cmdmode |= TULIP_CMD_CAPTREFFCT|TULIP_CMD_ENHCAPTEFFCT
1062 	|TULIP_CMD_THRSHLD160|TULIP_CMD_BACKOFFCTR;
1063     sc->tulip_intrmask |= TULIP_STS_LINKPASS|TULIP_STS_LINKFAIL;
1064     tulip_21041_mediainfo_init(sc);
1065 }
1066 
1067 static void
tulip_21041_media_poll(tulip_softc_t * const sc,const tulip_mediapoll_event_t event)1068 tulip_21041_media_poll(tulip_softc_t * const sc,
1069     const tulip_mediapoll_event_t event)
1070 {
1071     u_int32_t sia_status;
1072 
1073     TULIP_LOCK_ASSERT(sc);
1074 #if defined(TULIP_DEBUG)
1075     sc->tulip_dbg.dbg_events[event]++;
1076 #endif
1077 
1078     if (event == TULIP_MEDIAPOLL_LINKFAIL) {
1079 	if (sc->tulip_probe_state != TULIP_PROBE_INACTIVE
1080 		|| !TULIP_DO_AUTOSENSE(sc))
1081 	    return;
1082 	sc->tulip_media = TULIP_MEDIA_UNKNOWN;
1083 	tulip_reset(sc);	/* start probe */
1084 	return;
1085     }
1086 
1087     /*
1088      * If we've been been asked to start a poll or link change interrupt
1089      * restart the probe (and reset the tulip to a known state).
1090      */
1091     if (event == TULIP_MEDIAPOLL_START) {
1092 	sc->tulip_ifp->if_drv_flags |= IFF_DRV_OACTIVE;
1093 	sc->tulip_cmdmode &= ~(TULIP_CMD_FULLDUPLEX|TULIP_CMD_RXRUN);
1094 #ifdef notyet
1095 	if (sc->tulip_revinfo >= 0x20) {
1096 	    sc->tulip_cmdmode |= TULIP_CMD_FULLDUPLEX;
1097 	    sc->tulip_flags |= TULIP_DIDNWAY;
1098 	}
1099 #endif
1100 	TULIP_CSR_WRITE(sc, csr_command, sc->tulip_cmdmode);
1101 	sc->tulip_probe_state = TULIP_PROBE_MEDIATEST;
1102 	sc->tulip_probe_media = TULIP_MEDIA_10BASET;
1103 	sc->tulip_probe_timeout = TULIP_21041_PROBE_10BASET_TIMEOUT;
1104 	tulip_media_set(sc, TULIP_MEDIA_10BASET);
1105 	tulip_timeout(sc);
1106 	return;
1107     }
1108 
1109     if (sc->tulip_probe_state == TULIP_PROBE_INACTIVE)
1110 	return;
1111 
1112     if (event == TULIP_MEDIAPOLL_TXPROBE_OK) {
1113 #if defined(TULIP_DEBUG)
1114 	sc->tulip_dbg.dbg_txprobes_ok[sc->tulip_probe_media]++;
1115 #endif
1116 	tulip_linkup(sc, sc->tulip_probe_media);
1117 	return;
1118     }
1119 
1120     sia_status = TULIP_CSR_READ(sc, csr_sia_status);
1121     TULIP_CSR_WRITE(sc, csr_sia_status, sia_status);
1122     if ((sia_status & TULIP_SIASTS_LINKFAIL) == 0) {
1123 	if (sc->tulip_revinfo >= 0x20) {
1124 	    if (sia_status & (PHYSTS_10BASET_FD << (16 - 6)))
1125 		sc->tulip_probe_media = TULIP_MEDIA_10BASET_FD;
1126 	}
1127 	/*
1128 	 * If the link has passed LinkPass, 10baseT is the
1129 	 * proper media to use.
1130 	 */
1131 	tulip_linkup(sc, sc->tulip_probe_media);
1132 	return;
1133     }
1134 
1135     /*
1136      * wait for up to 2.4 seconds for the link to reach pass state.
1137      * Only then start scanning the other media for activity.
1138      * choose media with receive activity over those without.
1139      */
1140     if (sc->tulip_probe_media == TULIP_MEDIA_10BASET) {
1141 	if (event != TULIP_MEDIAPOLL_TIMER)
1142 	    return;
1143 	if (sc->tulip_probe_timeout > 0
1144 		&& (sia_status & TULIP_SIASTS_OTHERRXACTIVITY) == 0) {
1145 	    tulip_timeout(sc);
1146 	    return;
1147 	}
1148 	sc->tulip_probe_timeout = TULIP_21041_PROBE_AUIBNC_TIMEOUT;
1149 	sc->tulip_flags |= TULIP_WANTRXACT;
1150 	if (sia_status & TULIP_SIASTS_OTHERRXACTIVITY) {
1151 	    sc->tulip_probe_media = TULIP_MEDIA_BNC;
1152 	} else {
1153 	    sc->tulip_probe_media = TULIP_MEDIA_AUI;
1154 	}
1155 	tulip_media_set(sc, sc->tulip_probe_media);
1156 	tulip_timeout(sc);
1157 	return;
1158     }
1159 
1160     /*
1161      * If we failed, clear the txprobe active flag.
1162      */
1163     if (event == TULIP_MEDIAPOLL_TXPROBE_FAILED)
1164 	sc->tulip_flags &= ~TULIP_TXPROBE_ACTIVE;
1165 
1166 
1167     if (event == TULIP_MEDIAPOLL_TIMER) {
1168 	/*
1169 	 * If we've received something, then that's our link!
1170 	 */
1171 	if (sc->tulip_flags & TULIP_RXACT) {
1172 	    tulip_linkup(sc, sc->tulip_probe_media);
1173 	    return;
1174 	}
1175 	/*
1176 	 * if no txprobe active
1177 	 */
1178 	if ((sc->tulip_flags & TULIP_TXPROBE_ACTIVE) == 0
1179 		&& ((sc->tulip_flags & TULIP_WANTRXACT) == 0
1180 		    || (sia_status & TULIP_SIASTS_RXACTIVITY))) {
1181 	    sc->tulip_probe_timeout = TULIP_21041_PROBE_AUIBNC_TIMEOUT;
1182 	    tulip_txprobe(sc);
1183 	    tulip_timeout(sc);
1184 	    return;
1185 	}
1186 	/*
1187 	 * Take 2 passes through before deciding to not
1188 	 * wait for receive activity.  Then take another
1189 	 * two passes before spitting out a warning.
1190 	 */
1191 	if (sc->tulip_probe_timeout <= 0) {
1192 	    if (sc->tulip_flags & TULIP_WANTRXACT) {
1193 		sc->tulip_flags &= ~TULIP_WANTRXACT;
1194 		sc->tulip_probe_timeout = TULIP_21041_PROBE_AUIBNC_TIMEOUT;
1195 	    } else {
1196 		device_printf(sc->tulip_dev,
1197 		    "autosense failed: cable problem?\n");
1198 		if ((sc->tulip_ifp->if_flags & IFF_UP) == 0) {
1199 		    sc->tulip_ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
1200 		    sc->tulip_probe_state = TULIP_PROBE_INACTIVE;
1201 		    return;
1202 		}
1203 	    }
1204 	}
1205     }
1206 
1207     /*
1208      * Since this media failed to probe, try the other one.
1209      */
1210     sc->tulip_probe_timeout = TULIP_21041_PROBE_AUIBNC_TIMEOUT;
1211     if (sc->tulip_probe_media == TULIP_MEDIA_AUI) {
1212 	sc->tulip_probe_media = TULIP_MEDIA_BNC;
1213     } else {
1214 	sc->tulip_probe_media = TULIP_MEDIA_AUI;
1215     }
1216     tulip_media_set(sc, sc->tulip_probe_media);
1217     sc->tulip_flags &= ~TULIP_TXPROBE_ACTIVE;
1218     tulip_timeout(sc);
1219 }
1220 
1221 static const tulip_boardsw_t tulip_21041_boardsw = {
1222     TULIP_21041_GENERIC,
1223     tulip_21041_media_probe,
1224     tulip_media_select,
1225     tulip_21041_media_poll
1226 };
1227 
1228 static const tulip_phy_attr_t tulip_mii_phy_attrlist[] = {
1229     { 0x20005c00, 0,		/* 08-00-17 */
1230       {
1231 	{ 0x19, 0x0040, 0x0040 },	/* 10TX */
1232 	{ 0x19, 0x0040, 0x0000 },	/* 100TX */
1233       },
1234 #if defined(TULIP_DEBUG)
1235       "NS DP83840",
1236 #endif
1237     },
1238     { 0x0281F400, 0,		/* 00-A0-7D */
1239       {
1240 	{ 0x12, 0x0010, 0x0000 },	/* 10T */
1241 	{ },				/* 100TX */
1242 	{ 0x12, 0x0010, 0x0010 },	/* 100T4 */
1243 	{ 0x12, 0x0008, 0x0008 },	/* FULL_DUPLEX */
1244       },
1245 #if defined(TULIP_DEBUG)
1246       "Seeq 80C240"
1247 #endif
1248     },
1249 #if 0
1250     { 0x0015F420, 0,	/* 00-A0-7D */
1251       {
1252 	{ 0x12, 0x0010, 0x0000 },	/* 10T */
1253 	{ },				/* 100TX */
1254 	{ 0x12, 0x0010, 0x0010 },	/* 100T4 */
1255 	{ 0x12, 0x0008, 0x0008 },	/* FULL_DUPLEX */
1256       },
1257 #if defined(TULIP_DEBUG)
1258       "Broadcom BCM5000"
1259 #endif
1260     },
1261 #endif
1262     { 0x0281F400, 0,		/* 00-A0-BE */
1263       {
1264 	{ 0x11, 0x8000, 0x0000 },	/* 10T */
1265 	{ 0x11, 0x8000, 0x8000 },	/* 100TX */
1266 	{ },				/* 100T4 */
1267 	{ 0x11, 0x4000, 0x4000 },	/* FULL_DUPLEX */
1268       },
1269 #if defined(TULIP_DEBUG)
1270       "ICS 1890"
1271 #endif
1272     },
1273     { 0 }
1274 };
1275 
1276 static tulip_media_t
tulip_mii_phy_readspecific(tulip_softc_t * const sc)1277 tulip_mii_phy_readspecific(tulip_softc_t * const sc)
1278 {
1279     const tulip_phy_attr_t *attr;
1280     u_int16_t data;
1281     u_int32_t id;
1282     unsigned idx = 0;
1283     static const tulip_media_t table[] = {
1284 	TULIP_MEDIA_UNKNOWN,
1285 	TULIP_MEDIA_10BASET,
1286 	TULIP_MEDIA_100BASETX,
1287 	TULIP_MEDIA_100BASET4,
1288 	TULIP_MEDIA_UNKNOWN,
1289 	TULIP_MEDIA_10BASET_FD,
1290 	TULIP_MEDIA_100BASETX_FD,
1291 	TULIP_MEDIA_UNKNOWN
1292     };
1293 
1294     TULIP_LOCK_ASSERT(sc);
1295 
1296     /*
1297      * Don't read phy specific registers if link is not up.
1298      */
1299     data = tulip_mii_readreg(sc, sc->tulip_phyaddr, PHYREG_STATUS);
1300     if ((data & (PHYSTS_LINK_UP|PHYSTS_EXTENDED_REGS)) != (PHYSTS_LINK_UP|PHYSTS_EXTENDED_REGS))
1301 	return TULIP_MEDIA_UNKNOWN;
1302 
1303     id = (tulip_mii_readreg(sc, sc->tulip_phyaddr, PHYREG_IDLOW) << 16) |
1304 	tulip_mii_readreg(sc, sc->tulip_phyaddr, PHYREG_IDHIGH);
1305     for (attr = tulip_mii_phy_attrlist;; attr++) {
1306 	if (attr->attr_id == 0)
1307 	    return TULIP_MEDIA_UNKNOWN;
1308 	if ((id & ~0x0F) == attr->attr_id)
1309 	    break;
1310     }
1311 
1312     if (attr->attr_modes[PHY_MODE_100TX].pm_regno) {
1313 	const tulip_phy_modedata_t * const pm = &attr->attr_modes[PHY_MODE_100TX];
1314 	data = tulip_mii_readreg(sc, sc->tulip_phyaddr, pm->pm_regno);
1315 	if ((data & pm->pm_mask) == pm->pm_value)
1316 	    idx = 2;
1317     }
1318     if (idx == 0 && attr->attr_modes[PHY_MODE_100T4].pm_regno) {
1319 	const tulip_phy_modedata_t * const pm = &attr->attr_modes[PHY_MODE_100T4];
1320 	data = tulip_mii_readreg(sc, sc->tulip_phyaddr, pm->pm_regno);
1321 	if ((data & pm->pm_mask) == pm->pm_value)
1322 	    idx = 3;
1323     }
1324     if (idx == 0 && attr->attr_modes[PHY_MODE_10T].pm_regno) {
1325 	const tulip_phy_modedata_t * const pm = &attr->attr_modes[PHY_MODE_10T];
1326 	data = tulip_mii_readreg(sc, sc->tulip_phyaddr, pm->pm_regno);
1327 	if ((data & pm->pm_mask) == pm->pm_value)
1328 	    idx = 1;
1329     }
1330     if (idx != 0 && attr->attr_modes[PHY_MODE_FULLDUPLEX].pm_regno) {
1331 	const tulip_phy_modedata_t * const pm = &attr->attr_modes[PHY_MODE_FULLDUPLEX];
1332 	data = tulip_mii_readreg(sc, sc->tulip_phyaddr, pm->pm_regno);
1333 	idx += ((data & pm->pm_mask) == pm->pm_value ? 4 : 0);
1334     }
1335     return table[idx];
1336 }
1337 
1338 static unsigned
tulip_mii_get_phyaddr(tulip_softc_t * const sc,unsigned offset)1339 tulip_mii_get_phyaddr(tulip_softc_t * const sc, unsigned offset)
1340 {
1341     unsigned phyaddr;
1342 
1343     TULIP_LOCK_ASSERT(sc);
1344     for (phyaddr = 1; phyaddr < 32; phyaddr++) {
1345 	unsigned status = tulip_mii_readreg(sc, phyaddr, PHYREG_STATUS);
1346 	if (status == 0 || status == 0xFFFF || status < PHYSTS_10BASET)
1347 	    continue;
1348 	if (offset == 0)
1349 	    return phyaddr;
1350 	offset--;
1351     }
1352     if (offset == 0) {
1353 	unsigned status = tulip_mii_readreg(sc, 0, PHYREG_STATUS);
1354 	if (status == 0 || status == 0xFFFF || status < PHYSTS_10BASET)
1355 	    return TULIP_MII_NOPHY;
1356 	return 0;
1357     }
1358     return TULIP_MII_NOPHY;
1359 }
1360 
1361 static int
tulip_mii_map_abilities(tulip_softc_t * const sc,unsigned abilities)1362 tulip_mii_map_abilities(tulip_softc_t * const sc, unsigned abilities)
1363 {
1364     TULIP_LOCK_ASSERT(sc);
1365     sc->tulip_abilities = abilities;
1366     if (abilities & PHYSTS_100BASETX_FD) {
1367 	sc->tulip_probe_media = TULIP_MEDIA_100BASETX_FD;
1368     } else if (abilities & PHYSTS_100BASET4) {
1369 	sc->tulip_probe_media = TULIP_MEDIA_100BASET4;
1370     } else if (abilities & PHYSTS_100BASETX) {
1371 	sc->tulip_probe_media = TULIP_MEDIA_100BASETX;
1372     } else if (abilities & PHYSTS_10BASET_FD) {
1373 	sc->tulip_probe_media = TULIP_MEDIA_10BASET_FD;
1374     } else if (abilities & PHYSTS_10BASET) {
1375 	sc->tulip_probe_media = TULIP_MEDIA_10BASET;
1376     } else {
1377 	sc->tulip_probe_state = TULIP_PROBE_MEDIATEST;
1378 	return 0;
1379     }
1380     sc->tulip_probe_state = TULIP_PROBE_INACTIVE;
1381     return 1;
1382 }
1383 
1384 static void
tulip_mii_autonegotiate(tulip_softc_t * const sc,const unsigned phyaddr)1385 tulip_mii_autonegotiate(tulip_softc_t * const sc, const unsigned phyaddr)
1386 {
1387     struct ifnet *ifp = sc->tulip_ifp;
1388 
1389     TULIP_LOCK_ASSERT(sc);
1390     switch (sc->tulip_probe_state) {
1391         case TULIP_PROBE_MEDIATEST:
1392         case TULIP_PROBE_INACTIVE: {
1393 	    sc->tulip_flags |= TULIP_DIDNWAY;
1394 	    tulip_mii_writereg(sc, phyaddr, PHYREG_CONTROL, PHYCTL_RESET);
1395 	    sc->tulip_probe_timeout = 3000;
1396 	    sc->tulip_intrmask |= TULIP_STS_ABNRMLINTR|TULIP_STS_NORMALINTR;
1397 	    sc->tulip_probe_state = TULIP_PROBE_PHYRESET;
1398 	}
1399         /* FALLTHROUGH */
1400         case TULIP_PROBE_PHYRESET: {
1401 	    u_int32_t status;
1402 	    u_int32_t data = tulip_mii_readreg(sc, phyaddr, PHYREG_CONTROL);
1403 	    if (data & PHYCTL_RESET) {
1404 		if (sc->tulip_probe_timeout > 0) {
1405 		    tulip_timeout(sc);
1406 		    return;
1407 		}
1408 		printf("%s(phy%d): error: reset of PHY never completed!\n",
1409 			   ifp->if_xname, phyaddr);
1410 		sc->tulip_flags &= ~TULIP_TXPROBE_ACTIVE;
1411 		sc->tulip_probe_state = TULIP_PROBE_FAILED;
1412 		sc->tulip_ifp->if_flags &= ~IFF_UP;
1413 		sc->tulip_ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
1414 		return;
1415 	    }
1416 	    status = tulip_mii_readreg(sc, phyaddr, PHYREG_STATUS);
1417 	    if ((status & PHYSTS_CAN_AUTONEG) == 0) {
1418 #if defined(TULIP_DEBUG)
1419 		loudprintf("%s(phy%d): autonegotiation disabled\n",
1420 			   ifp->if_xname, phyaddr);
1421 #endif
1422 		sc->tulip_flags &= ~TULIP_DIDNWAY;
1423 		sc->tulip_probe_state = TULIP_PROBE_MEDIATEST;
1424 		return;
1425 	    }
1426 	    if (tulip_mii_readreg(sc, phyaddr, PHYREG_AUTONEG_ADVERTISEMENT) != ((status >> 6) | 0x01))
1427 		tulip_mii_writereg(sc, phyaddr, PHYREG_AUTONEG_ADVERTISEMENT, (status >> 6) | 0x01);
1428 	    tulip_mii_writereg(sc, phyaddr, PHYREG_CONTROL, data|PHYCTL_AUTONEG_RESTART|PHYCTL_AUTONEG_ENABLE);
1429 	    data = tulip_mii_readreg(sc, phyaddr, PHYREG_CONTROL);
1430 #if defined(TULIP_DEBUG)
1431 	    if ((data & PHYCTL_AUTONEG_ENABLE) == 0)
1432 		loudprintf("%s(phy%d): oops: enable autonegotiation failed: 0x%04x\n",
1433 			   ifp->if_xname, phyaddr, data);
1434 	    else
1435 		loudprintf("%s(phy%d): autonegotiation restarted: 0x%04x\n",
1436 			   ifp->if_xname, phyaddr, data);
1437 	    sc->tulip_dbg.dbg_nway_starts++;
1438 #endif
1439 	    sc->tulip_probe_state = TULIP_PROBE_PHYAUTONEG;
1440 	    sc->tulip_probe_timeout = 3000;
1441 	}
1442         /* FALLTHROUGH */
1443         case TULIP_PROBE_PHYAUTONEG: {
1444 	    u_int32_t status = tulip_mii_readreg(sc, phyaddr, PHYREG_STATUS);
1445 	    u_int32_t data;
1446 	    if ((status & PHYSTS_AUTONEG_DONE) == 0) {
1447 		if (sc->tulip_probe_timeout > 0) {
1448 		    tulip_timeout(sc);
1449 		    return;
1450 		}
1451 #if defined(TULIP_DEBUG)
1452 		loudprintf("%s(phy%d): autonegotiation timeout: sts=0x%04x, ctl=0x%04x\n",
1453 			   ifp->if_xname, phyaddr, status,
1454 			   tulip_mii_readreg(sc, phyaddr, PHYREG_CONTROL));
1455 #endif
1456 		sc->tulip_flags &= ~TULIP_DIDNWAY;
1457 		sc->tulip_probe_state = TULIP_PROBE_MEDIATEST;
1458 		return;
1459 	    }
1460 	    data = tulip_mii_readreg(sc, phyaddr, PHYREG_AUTONEG_ABILITIES);
1461 #if defined(TULIP_DEBUG)
1462 	    loudprintf("%s(phy%d): autonegotiation complete: 0x%04x\n",
1463 		       ifp->if_xname, phyaddr, data);
1464 #endif
1465 	    data = (data << 6) & status;
1466 	    if (!tulip_mii_map_abilities(sc, data))
1467 		sc->tulip_flags &= ~TULIP_DIDNWAY;
1468 	    return;
1469 	}
1470 	default: {
1471 #if defined(DIAGNOSTIC)
1472 	    panic("tulip_media_poll: botch at line %d\n", __LINE__);
1473 #endif
1474 	    break;
1475 	}
1476     }
1477 #if defined(TULIP_DEBUG)
1478     loudprintf("%s(phy%d): autonegotiation failure: state = %d\n",
1479 	       ifp->if_xname, phyaddr, sc->tulip_probe_state);
1480 	    sc->tulip_dbg.dbg_nway_failures++;
1481 #endif
1482 }
1483 
1484 static void
tulip_2114x_media_preset(tulip_softc_t * const sc)1485 tulip_2114x_media_preset(tulip_softc_t * const sc)
1486 {
1487     const tulip_media_info_t *mi = NULL;
1488     tulip_media_t media = sc->tulip_media;
1489 
1490     TULIP_LOCK_ASSERT(sc);
1491     if (sc->tulip_probe_state == TULIP_PROBE_INACTIVE)
1492 	media = sc->tulip_media;
1493     else
1494 	media = sc->tulip_probe_media;
1495 
1496     sc->tulip_cmdmode &= ~TULIP_CMD_PORTSELECT;
1497     sc->tulip_flags &= ~TULIP_SQETEST;
1498     if (media != TULIP_MEDIA_UNKNOWN && media != TULIP_MEDIA_MAX) {
1499 #if defined(TULIP_DEBUG)
1500 	if (media < TULIP_MEDIA_MAX && sc->tulip_mediums[media] != NULL) {
1501 #endif
1502 	    mi = sc->tulip_mediums[media];
1503 	    if (mi->mi_type == TULIP_MEDIAINFO_MII) {
1504 		sc->tulip_cmdmode |= TULIP_CMD_PORTSELECT;
1505 	    } else if (mi->mi_type == TULIP_MEDIAINFO_GPR
1506 		       || mi->mi_type == TULIP_MEDIAINFO_SYM) {
1507 		sc->tulip_cmdmode &= ~TULIP_GPR_CMDBITS;
1508 		sc->tulip_cmdmode |= mi->mi_cmdmode;
1509 	    } else if (mi->mi_type == TULIP_MEDIAINFO_SIA) {
1510 		TULIP_CSR_WRITE(sc, csr_sia_connectivity, TULIP_SIACONN_RESET);
1511 	    }
1512 #if defined(TULIP_DEBUG)
1513 	} else {
1514 	    device_printf(sc->tulip_dev, "preset: bad media %d!\n", media);
1515 	}
1516 #endif
1517     }
1518     switch (media) {
1519 	case TULIP_MEDIA_BNC:
1520 	case TULIP_MEDIA_AUI:
1521 	case TULIP_MEDIA_10BASET: {
1522 	    sc->tulip_cmdmode &= ~TULIP_CMD_FULLDUPLEX;
1523 	    sc->tulip_cmdmode |= TULIP_CMD_TXTHRSHLDCTL;
1524 	    sc->tulip_ifp->if_baudrate = 10000000;
1525 	    sc->tulip_flags |= TULIP_SQETEST;
1526 	    break;
1527 	}
1528 	case TULIP_MEDIA_10BASET_FD: {
1529 	    sc->tulip_cmdmode |= TULIP_CMD_FULLDUPLEX|TULIP_CMD_TXTHRSHLDCTL;
1530 	    sc->tulip_ifp->if_baudrate = 10000000;
1531 	    break;
1532 	}
1533 	case TULIP_MEDIA_100BASEFX:
1534 	case TULIP_MEDIA_100BASET4:
1535 	case TULIP_MEDIA_100BASETX: {
1536 	    sc->tulip_cmdmode &= ~(TULIP_CMD_FULLDUPLEX|TULIP_CMD_TXTHRSHLDCTL);
1537 	    sc->tulip_cmdmode |= TULIP_CMD_PORTSELECT;
1538 	    sc->tulip_ifp->if_baudrate = 100000000;
1539 	    break;
1540 	}
1541 	case TULIP_MEDIA_100BASEFX_FD:
1542 	case TULIP_MEDIA_100BASETX_FD: {
1543 	    sc->tulip_cmdmode |= TULIP_CMD_FULLDUPLEX|TULIP_CMD_PORTSELECT;
1544 	    sc->tulip_cmdmode &= ~TULIP_CMD_TXTHRSHLDCTL;
1545 	    sc->tulip_ifp->if_baudrate = 100000000;
1546 	    break;
1547 	}
1548 	default: {
1549 	    break;
1550 	}
1551     }
1552     TULIP_CSR_WRITE(sc, csr_command, sc->tulip_cmdmode);
1553 }
1554 
1555 /*
1556  ********************************************************************
1557  *  Start of 21140/21140A support which does not use the MII interface
1558  */
1559 
1560 static void
tulip_null_media_poll(tulip_softc_t * const sc,tulip_mediapoll_event_t event)1561 tulip_null_media_poll(tulip_softc_t * const sc, tulip_mediapoll_event_t event)
1562 {
1563 #if defined(TULIP_DEBUG)
1564     sc->tulip_dbg.dbg_events[event]++;
1565 #endif
1566 #if defined(DIAGNOSTIC)
1567     device_printf(sc->tulip_dev, "botch(media_poll) at line %d\n", __LINE__);
1568 #endif
1569 }
1570 
1571 static inline void
tulip_21140_mediainit(tulip_softc_t * const sc,tulip_media_info_t * const mip,tulip_media_t const media,unsigned gpdata,unsigned cmdmode)1572 tulip_21140_mediainit(tulip_softc_t * const sc, tulip_media_info_t * const mip,
1573     tulip_media_t const media, unsigned gpdata, unsigned cmdmode)
1574 {
1575     TULIP_LOCK_ASSERT(sc);
1576     sc->tulip_mediums[media] = mip;
1577     mip->mi_type = TULIP_MEDIAINFO_GPR;
1578     mip->mi_cmdmode = cmdmode;
1579     mip->mi_gpdata = gpdata;
1580 }
1581 
1582 static void
tulip_21140_evalboard_media_probe(tulip_softc_t * const sc)1583 tulip_21140_evalboard_media_probe(tulip_softc_t * const sc)
1584 {
1585     tulip_media_info_t *mip = sc->tulip_mediainfo;
1586 
1587     TULIP_LOCK_ASSERT(sc);
1588     sc->tulip_gpinit = TULIP_GP_EB_PINS;
1589     sc->tulip_gpdata = TULIP_GP_EB_INIT;
1590     TULIP_CSR_WRITE(sc, csr_gp, TULIP_GP_EB_PINS);
1591     TULIP_CSR_WRITE(sc, csr_gp, TULIP_GP_EB_INIT);
1592     TULIP_CSR_WRITE(sc, csr_command,
1593 	TULIP_CSR_READ(sc, csr_command) | TULIP_CMD_PORTSELECT |
1594 	TULIP_CMD_PCSFUNCTION | TULIP_CMD_SCRAMBLER | TULIP_CMD_MUSTBEONE);
1595     TULIP_CSR_WRITE(sc, csr_command,
1596 	TULIP_CSR_READ(sc, csr_command) & ~TULIP_CMD_TXTHRSHLDCTL);
1597     DELAY(1000000);
1598     if ((TULIP_CSR_READ(sc, csr_gp) & TULIP_GP_EB_OK100) != 0) {
1599 	sc->tulip_media = TULIP_MEDIA_10BASET;
1600     } else {
1601 	sc->tulip_media = TULIP_MEDIA_100BASETX;
1602     }
1603     tulip_21140_mediainit(sc, mip++, TULIP_MEDIA_10BASET,
1604 			  TULIP_GP_EB_INIT,
1605 			  TULIP_CMD_TXTHRSHLDCTL);
1606     tulip_21140_mediainit(sc, mip++, TULIP_MEDIA_10BASET_FD,
1607 			  TULIP_GP_EB_INIT,
1608 			  TULIP_CMD_TXTHRSHLDCTL|TULIP_CMD_FULLDUPLEX);
1609     tulip_21140_mediainit(sc, mip++, TULIP_MEDIA_100BASETX,
1610 			  TULIP_GP_EB_INIT,
1611 			  TULIP_CMD_PORTSELECT|TULIP_CMD_PCSFUNCTION
1612 			      |TULIP_CMD_SCRAMBLER);
1613     tulip_21140_mediainit(sc, mip++, TULIP_MEDIA_100BASETX_FD,
1614 			  TULIP_GP_EB_INIT,
1615 			  TULIP_CMD_PORTSELECT|TULIP_CMD_PCSFUNCTION
1616 			      |TULIP_CMD_SCRAMBLER|TULIP_CMD_FULLDUPLEX);
1617 }
1618 
1619 static const tulip_boardsw_t tulip_21140_eb_boardsw = {
1620     TULIP_21140_DEC_EB,
1621     tulip_21140_evalboard_media_probe,
1622     tulip_media_select,
1623     tulip_null_media_poll,
1624     tulip_2114x_media_preset,
1625 };
1626 
1627 static void
tulip_21140_accton_media_probe(tulip_softc_t * const sc)1628 tulip_21140_accton_media_probe(tulip_softc_t * const sc)
1629 {
1630     tulip_media_info_t *mip = sc->tulip_mediainfo;
1631     unsigned gpdata;
1632 
1633     TULIP_LOCK_ASSERT(sc);
1634     sc->tulip_gpinit = TULIP_GP_EB_PINS;
1635     sc->tulip_gpdata = TULIP_GP_EB_INIT;
1636     TULIP_CSR_WRITE(sc, csr_gp, TULIP_GP_EB_PINS);
1637     TULIP_CSR_WRITE(sc, csr_gp, TULIP_GP_EB_INIT);
1638     TULIP_CSR_WRITE(sc, csr_command,
1639 	TULIP_CSR_READ(sc, csr_command) | TULIP_CMD_PORTSELECT |
1640 	TULIP_CMD_PCSFUNCTION | TULIP_CMD_SCRAMBLER | TULIP_CMD_MUSTBEONE);
1641     TULIP_CSR_WRITE(sc, csr_command,
1642 	TULIP_CSR_READ(sc, csr_command) & ~TULIP_CMD_TXTHRSHLDCTL);
1643     DELAY(1000000);
1644     gpdata = TULIP_CSR_READ(sc, csr_gp);
1645     if ((gpdata & TULIP_GP_EN1207_UTP_INIT) == 0) {
1646 	sc->tulip_media = TULIP_MEDIA_10BASET;
1647     } else {
1648 	if ((gpdata & TULIP_GP_EN1207_BNC_INIT) == 0) {
1649 		sc->tulip_media = TULIP_MEDIA_BNC;
1650         } else {
1651 		sc->tulip_media = TULIP_MEDIA_100BASETX;
1652         }
1653     }
1654     tulip_21140_mediainit(sc, mip++, TULIP_MEDIA_BNC,
1655 			  TULIP_GP_EN1207_BNC_INIT,
1656 			  TULIP_CMD_TXTHRSHLDCTL);
1657     tulip_21140_mediainit(sc, mip++, TULIP_MEDIA_10BASET,
1658 			  TULIP_GP_EN1207_UTP_INIT,
1659 			  TULIP_CMD_TXTHRSHLDCTL);
1660     tulip_21140_mediainit(sc, mip++, TULIP_MEDIA_10BASET_FD,
1661 			  TULIP_GP_EN1207_UTP_INIT,
1662 			  TULIP_CMD_TXTHRSHLDCTL|TULIP_CMD_FULLDUPLEX);
1663     tulip_21140_mediainit(sc, mip++, TULIP_MEDIA_100BASETX,
1664 			  TULIP_GP_EN1207_100_INIT,
1665 			  TULIP_CMD_PORTSELECT|TULIP_CMD_PCSFUNCTION
1666 			      |TULIP_CMD_SCRAMBLER);
1667     tulip_21140_mediainit(sc, mip++, TULIP_MEDIA_100BASETX_FD,
1668 			  TULIP_GP_EN1207_100_INIT,
1669 			  TULIP_CMD_PORTSELECT|TULIP_CMD_PCSFUNCTION
1670 			      |TULIP_CMD_SCRAMBLER|TULIP_CMD_FULLDUPLEX);
1671 }
1672 
1673 static const tulip_boardsw_t tulip_21140_accton_boardsw = {
1674     TULIP_21140_EN1207,
1675     tulip_21140_accton_media_probe,
1676     tulip_media_select,
1677     tulip_null_media_poll,
1678     tulip_2114x_media_preset,
1679 };
1680 
1681 static void
tulip_21140_smc9332_media_probe(tulip_softc_t * const sc)1682 tulip_21140_smc9332_media_probe(tulip_softc_t * const sc)
1683 {
1684     tulip_media_info_t *mip = sc->tulip_mediainfo;
1685     int idx, cnt = 0;
1686 
1687     TULIP_LOCK_ASSERT(sc);
1688     TULIP_CSR_WRITE(sc, csr_command, TULIP_CMD_PORTSELECT|TULIP_CMD_MUSTBEONE);
1689     TULIP_CSR_WRITE(sc, csr_busmode, TULIP_BUSMODE_SWRESET);
1690     DELAY(10);	/* Wait 10 microseconds (actually 50 PCI cycles but at
1691 		   33MHz that comes to two microseconds but wait a
1692 		   bit longer anyways) */
1693     TULIP_CSR_WRITE(sc, csr_command, TULIP_CMD_PORTSELECT |
1694 	TULIP_CMD_PCSFUNCTION | TULIP_CMD_SCRAMBLER | TULIP_CMD_MUSTBEONE);
1695     sc->tulip_gpinit = TULIP_GP_SMC_9332_PINS;
1696     sc->tulip_gpdata = TULIP_GP_SMC_9332_INIT;
1697     TULIP_CSR_WRITE(sc, csr_gp, TULIP_GP_SMC_9332_PINS|TULIP_GP_PINSET);
1698     TULIP_CSR_WRITE(sc, csr_gp, TULIP_GP_SMC_9332_INIT);
1699     DELAY(200000);
1700     for (idx = 1000; idx > 0; idx--) {
1701 	u_int32_t csr = TULIP_CSR_READ(sc, csr_gp);
1702 	if ((csr & (TULIP_GP_SMC_9332_OK10|TULIP_GP_SMC_9332_OK100)) == (TULIP_GP_SMC_9332_OK10|TULIP_GP_SMC_9332_OK100)) {
1703 	    if (++cnt > 100)
1704 		break;
1705 	} else if ((csr & TULIP_GP_SMC_9332_OK10) == 0) {
1706 	    break;
1707 	} else {
1708 	    cnt = 0;
1709 	}
1710 	DELAY(1000);
1711     }
1712     sc->tulip_media = cnt > 100 ? TULIP_MEDIA_100BASETX : TULIP_MEDIA_10BASET;
1713     tulip_21140_mediainit(sc, mip++, TULIP_MEDIA_100BASETX,
1714 			  TULIP_GP_SMC_9332_INIT,
1715 			  TULIP_CMD_PORTSELECT|TULIP_CMD_PCSFUNCTION
1716 			      |TULIP_CMD_SCRAMBLER);
1717     tulip_21140_mediainit(sc, mip++, TULIP_MEDIA_100BASETX_FD,
1718 			  TULIP_GP_SMC_9332_INIT,
1719 			  TULIP_CMD_PORTSELECT|TULIP_CMD_PCSFUNCTION
1720 			      |TULIP_CMD_SCRAMBLER|TULIP_CMD_FULLDUPLEX);
1721     tulip_21140_mediainit(sc, mip++, TULIP_MEDIA_10BASET,
1722 			  TULIP_GP_SMC_9332_INIT,
1723 			  TULIP_CMD_TXTHRSHLDCTL);
1724     tulip_21140_mediainit(sc, mip++, TULIP_MEDIA_10BASET_FD,
1725 			  TULIP_GP_SMC_9332_INIT,
1726 			  TULIP_CMD_TXTHRSHLDCTL|TULIP_CMD_FULLDUPLEX);
1727 }
1728 
1729 static const tulip_boardsw_t tulip_21140_smc9332_boardsw = {
1730     TULIP_21140_SMC_9332,
1731     tulip_21140_smc9332_media_probe,
1732     tulip_media_select,
1733     tulip_null_media_poll,
1734     tulip_2114x_media_preset,
1735 };
1736 
1737 static void
tulip_21140_cogent_em100_media_probe(tulip_softc_t * const sc)1738 tulip_21140_cogent_em100_media_probe(tulip_softc_t * const sc)
1739 {
1740     tulip_media_info_t *mip = sc->tulip_mediainfo;
1741     u_int32_t cmdmode = TULIP_CSR_READ(sc, csr_command);
1742 
1743     TULIP_LOCK_ASSERT(sc);
1744     sc->tulip_gpinit = TULIP_GP_EM100_PINS;
1745     sc->tulip_gpdata = TULIP_GP_EM100_INIT;
1746     TULIP_CSR_WRITE(sc, csr_gp, TULIP_GP_EM100_PINS);
1747     TULIP_CSR_WRITE(sc, csr_gp, TULIP_GP_EM100_INIT);
1748 
1749     cmdmode = TULIP_CMD_PORTSELECT|TULIP_CMD_PCSFUNCTION|TULIP_CMD_MUSTBEONE;
1750     cmdmode &= ~(TULIP_CMD_TXTHRSHLDCTL|TULIP_CMD_SCRAMBLER);
1751     if (sc->tulip_rombuf[32] == TULIP_COGENT_EM100FX_ID) {
1752 	TULIP_CSR_WRITE(sc, csr_command, cmdmode);
1753 	sc->tulip_media = TULIP_MEDIA_100BASEFX;
1754 
1755 	tulip_21140_mediainit(sc, mip++, TULIP_MEDIA_100BASEFX,
1756 			  TULIP_GP_EM100_INIT,
1757 			  TULIP_CMD_PORTSELECT|TULIP_CMD_PCSFUNCTION);
1758 	tulip_21140_mediainit(sc, mip++, TULIP_MEDIA_100BASEFX_FD,
1759 			  TULIP_GP_EM100_INIT,
1760 			  TULIP_CMD_PORTSELECT|TULIP_CMD_PCSFUNCTION
1761 			      |TULIP_CMD_FULLDUPLEX);
1762     } else {
1763 	TULIP_CSR_WRITE(sc, csr_command, cmdmode|TULIP_CMD_SCRAMBLER);
1764 	sc->tulip_media = TULIP_MEDIA_100BASETX;
1765 	tulip_21140_mediainit(sc, mip++, TULIP_MEDIA_100BASETX,
1766 			  TULIP_GP_EM100_INIT,
1767 			  TULIP_CMD_PORTSELECT|TULIP_CMD_PCSFUNCTION
1768 			      |TULIP_CMD_SCRAMBLER);
1769 	tulip_21140_mediainit(sc, mip++, TULIP_MEDIA_100BASETX_FD,
1770 			  TULIP_GP_EM100_INIT,
1771 			  TULIP_CMD_PORTSELECT|TULIP_CMD_PCSFUNCTION
1772 			      |TULIP_CMD_SCRAMBLER|TULIP_CMD_FULLDUPLEX);
1773     }
1774 }
1775 
1776 static const tulip_boardsw_t tulip_21140_cogent_em100_boardsw = {
1777     TULIP_21140_COGENT_EM100,
1778     tulip_21140_cogent_em100_media_probe,
1779     tulip_media_select,
1780     tulip_null_media_poll,
1781     tulip_2114x_media_preset
1782 };
1783 
1784 static void
tulip_21140_znyx_zx34x_media_probe(tulip_softc_t * const sc)1785 tulip_21140_znyx_zx34x_media_probe(tulip_softc_t * const sc)
1786 {
1787     tulip_media_info_t *mip = sc->tulip_mediainfo;
1788     int cnt10 = 0, cnt100 = 0, idx;
1789 
1790     TULIP_LOCK_ASSERT(sc);
1791     sc->tulip_gpinit = TULIP_GP_ZX34X_PINS;
1792     sc->tulip_gpdata = TULIP_GP_ZX34X_INIT;
1793     TULIP_CSR_WRITE(sc, csr_gp, TULIP_GP_ZX34X_PINS);
1794     TULIP_CSR_WRITE(sc, csr_gp, TULIP_GP_ZX34X_INIT);
1795     TULIP_CSR_WRITE(sc, csr_command,
1796 	TULIP_CSR_READ(sc, csr_command) | TULIP_CMD_PORTSELECT |
1797 	TULIP_CMD_PCSFUNCTION | TULIP_CMD_SCRAMBLER | TULIP_CMD_MUSTBEONE);
1798     TULIP_CSR_WRITE(sc, csr_command,
1799 	TULIP_CSR_READ(sc, csr_command) & ~TULIP_CMD_TXTHRSHLDCTL);
1800 
1801     DELAY(200000);
1802     for (idx = 1000; idx > 0; idx--) {
1803 	u_int32_t csr = TULIP_CSR_READ(sc, csr_gp);
1804 	if ((csr & (TULIP_GP_ZX34X_LNKFAIL|TULIP_GP_ZX34X_SYMDET|TULIP_GP_ZX34X_SIGDET)) == (TULIP_GP_ZX34X_LNKFAIL|TULIP_GP_ZX34X_SYMDET|TULIP_GP_ZX34X_SIGDET)) {
1805 	    if (++cnt100 > 100)
1806 		break;
1807 	} else if ((csr & TULIP_GP_ZX34X_LNKFAIL) == 0) {
1808 	    if (++cnt10 > 100)
1809 		break;
1810 	} else {
1811 	    cnt10 = 0;
1812 	    cnt100 = 0;
1813 	}
1814 	DELAY(1000);
1815     }
1816     sc->tulip_media = cnt100 > 100 ? TULIP_MEDIA_100BASETX : TULIP_MEDIA_10BASET;
1817     tulip_21140_mediainit(sc, mip++, TULIP_MEDIA_10BASET,
1818 			  TULIP_GP_ZX34X_INIT,
1819 			  TULIP_CMD_TXTHRSHLDCTL);
1820     tulip_21140_mediainit(sc, mip++, TULIP_MEDIA_10BASET_FD,
1821 			  TULIP_GP_ZX34X_INIT,
1822 			  TULIP_CMD_TXTHRSHLDCTL|TULIP_CMD_FULLDUPLEX);
1823     tulip_21140_mediainit(sc, mip++, TULIP_MEDIA_100BASETX,
1824 			  TULIP_GP_ZX34X_INIT,
1825 			  TULIP_CMD_PORTSELECT|TULIP_CMD_PCSFUNCTION
1826 			      |TULIP_CMD_SCRAMBLER);
1827     tulip_21140_mediainit(sc, mip++, TULIP_MEDIA_100BASETX_FD,
1828 			  TULIP_GP_ZX34X_INIT,
1829 			  TULIP_CMD_PORTSELECT|TULIP_CMD_PCSFUNCTION
1830 			      |TULIP_CMD_SCRAMBLER|TULIP_CMD_FULLDUPLEX);
1831 }
1832 
1833 static const tulip_boardsw_t tulip_21140_znyx_zx34x_boardsw = {
1834     TULIP_21140_ZNYX_ZX34X,
1835     tulip_21140_znyx_zx34x_media_probe,
1836     tulip_media_select,
1837     tulip_null_media_poll,
1838     tulip_2114x_media_preset,
1839 };
1840 
1841 static void
tulip_2114x_media_probe(tulip_softc_t * const sc)1842 tulip_2114x_media_probe(tulip_softc_t * const sc)
1843 {
1844     TULIP_LOCK_ASSERT(sc);
1845     sc->tulip_cmdmode |= TULIP_CMD_MUSTBEONE
1846 	|TULIP_CMD_BACKOFFCTR|TULIP_CMD_THRSHLD72;
1847 }
1848 
1849 static const tulip_boardsw_t tulip_2114x_isv_boardsw = {
1850     TULIP_21140_ISV,
1851     tulip_2114x_media_probe,
1852     tulip_media_select,
1853     tulip_media_poll,
1854     tulip_2114x_media_preset,
1855 };
1856 
1857 /*
1858  * ******** END of chip-specific handlers. ***********
1859  */
1860 
1861 /*
1862  * Code the read the SROM and MII bit streams (I2C)
1863  */
1864 #define EMIT    do { TULIP_CSR_WRITE(sc, csr_srom_mii, csr); DELAY(1); } while (0)
1865 
1866 static void
tulip_srom_idle(tulip_softc_t * const sc)1867 tulip_srom_idle(tulip_softc_t * const sc)
1868 {
1869     unsigned bit, csr;
1870 
1871     csr  = SROMSEL ; EMIT;
1872     csr  = SROMSEL | SROMRD; EMIT;
1873     csr ^= SROMCS; EMIT;
1874     csr ^= SROMCLKON; EMIT;
1875 
1876     /*
1877      * Write 25 cycles of 0 which will force the SROM to be idle.
1878      */
1879     for (bit = 3 + SROM_BITWIDTH + 16; bit > 0; bit--) {
1880         csr ^= SROMCLKOFF; EMIT;    /* clock low; data not valid */
1881         csr ^= SROMCLKON; EMIT;     /* clock high; data valid */
1882     }
1883     csr ^= SROMCLKOFF; EMIT;
1884     csr ^= SROMCS; EMIT;
1885     csr  = 0; EMIT;
1886 }
1887 
1888 static void
tulip_srom_read(tulip_softc_t * const sc)1889 tulip_srom_read(tulip_softc_t * const sc)
1890 {
1891     unsigned idx;
1892     const unsigned bitwidth = SROM_BITWIDTH;
1893     const unsigned cmdmask = (SROMCMD_RD << bitwidth);
1894     const unsigned msb = 1 << (bitwidth + 3 - 1);
1895     unsigned lastidx = (1 << bitwidth) - 1;
1896 
1897     tulip_srom_idle(sc);
1898 
1899     for (idx = 0; idx <= lastidx; idx++) {
1900         unsigned lastbit, data, bits, bit, csr;
1901 	csr  = SROMSEL ;	        EMIT;
1902         csr  = SROMSEL | SROMRD;        EMIT;
1903         csr ^= SROMCSON;                EMIT;
1904         csr ^=            SROMCLKON;    EMIT;
1905 
1906         lastbit = 0;
1907         for (bits = idx|cmdmask, bit = bitwidth + 3; bit > 0; bit--, bits <<= 1) {
1908             const unsigned thisbit = bits & msb;
1909             csr ^= SROMCLKOFF; EMIT;    /* clock low; data not valid */
1910             if (thisbit != lastbit) {
1911                 csr ^= SROMDOUT; EMIT;  /* clock low; invert data */
1912             } else {
1913 		EMIT;
1914 	    }
1915             csr ^= SROMCLKON; EMIT;     /* clock high; data valid */
1916             lastbit = thisbit;
1917         }
1918         csr ^= SROMCLKOFF; EMIT;
1919 
1920         for (data = 0, bits = 0; bits < 16; bits++) {
1921             data <<= 1;
1922             csr ^= SROMCLKON; EMIT;     /* clock high; data valid */
1923             data |= TULIP_CSR_READ(sc, csr_srom_mii) & SROMDIN ? 1 : 0;
1924             csr ^= SROMCLKOFF; EMIT;    /* clock low; data not valid */
1925         }
1926 	sc->tulip_rombuf[idx*2] = data & 0xFF;
1927 	sc->tulip_rombuf[idx*2+1] = data >> 8;
1928 	csr  = SROMSEL | SROMRD; EMIT;
1929 	csr  = 0; EMIT;
1930     }
1931     tulip_srom_idle(sc);
1932 }
1933 
1934 #define MII_EMIT    do { TULIP_CSR_WRITE(sc, csr_srom_mii, csr); DELAY(1); } while (0)
1935 
1936 static void
tulip_mii_writebits(tulip_softc_t * const sc,unsigned data,unsigned bits)1937 tulip_mii_writebits(tulip_softc_t * const sc, unsigned data, unsigned bits)
1938 {
1939     unsigned msb = 1 << (bits - 1);
1940     unsigned csr = TULIP_CSR_READ(sc, csr_srom_mii) & (MII_RD|MII_DOUT|MII_CLK);
1941     unsigned lastbit = (csr & MII_DOUT) ? msb : 0;
1942 
1943     TULIP_LOCK_ASSERT(sc);
1944     csr |= MII_WR; MII_EMIT;  		/* clock low; assert write */
1945 
1946     for (; bits > 0; bits--, data <<= 1) {
1947 	const unsigned thisbit = data & msb;
1948 	if (thisbit != lastbit) {
1949 	    csr ^= MII_DOUT; MII_EMIT;  /* clock low; invert data */
1950 	}
1951 	csr ^= MII_CLKON; MII_EMIT;     /* clock high; data valid */
1952 	lastbit = thisbit;
1953 	csr ^= MII_CLKOFF; MII_EMIT;    /* clock low; data not valid */
1954     }
1955 }
1956 
1957 static void
tulip_mii_turnaround(tulip_softc_t * const sc,unsigned cmd)1958 tulip_mii_turnaround(tulip_softc_t * const sc, unsigned cmd)
1959 {
1960     unsigned csr = TULIP_CSR_READ(sc, csr_srom_mii) & (MII_RD|MII_DOUT|MII_CLK);
1961 
1962     TULIP_LOCK_ASSERT(sc);
1963     if (cmd == MII_WRCMD) {
1964 	csr |= MII_DOUT; MII_EMIT;	/* clock low; change data */
1965 	csr ^= MII_CLKON; MII_EMIT;	/* clock high; data valid */
1966 	csr ^= MII_CLKOFF; MII_EMIT;	/* clock low; data not valid */
1967 	csr ^= MII_DOUT; MII_EMIT;	/* clock low; change data */
1968     } else {
1969 	csr |= MII_RD; MII_EMIT;	/* clock low; switch to read */
1970     }
1971     csr ^= MII_CLKON; MII_EMIT;		/* clock high; data valid */
1972     csr ^= MII_CLKOFF; MII_EMIT;	/* clock low; data not valid */
1973 }
1974 
1975 static unsigned
tulip_mii_readbits(tulip_softc_t * const sc)1976 tulip_mii_readbits(tulip_softc_t * const sc)
1977 {
1978     unsigned data;
1979     unsigned csr = TULIP_CSR_READ(sc, csr_srom_mii) & (MII_RD|MII_DOUT|MII_CLK);
1980     int idx;
1981 
1982     TULIP_LOCK_ASSERT(sc);
1983     for (idx = 0, data = 0; idx < 16; idx++) {
1984 	data <<= 1;	/* this is NOOP on the first pass through */
1985 	csr ^= MII_CLKON; MII_EMIT;	/* clock high; data valid */
1986 	if (TULIP_CSR_READ(sc, csr_srom_mii) & MII_DIN)
1987 	    data |= 1;
1988 	csr ^= MII_CLKOFF; MII_EMIT;	/* clock low; data not valid */
1989     }
1990     csr ^= MII_RD; MII_EMIT;		/* clock low; turn off read */
1991 
1992     return data;
1993 }
1994 
1995 static unsigned
tulip_mii_readreg(tulip_softc_t * const sc,unsigned devaddr,unsigned regno)1996 tulip_mii_readreg(tulip_softc_t * const sc, unsigned devaddr, unsigned regno)
1997 {
1998     unsigned csr = TULIP_CSR_READ(sc, csr_srom_mii) & (MII_RD|MII_DOUT|MII_CLK);
1999     unsigned data;
2000 
2001     TULIP_LOCK_ASSERT(sc);
2002     csr &= ~(MII_RD|MII_CLK); MII_EMIT;
2003     tulip_mii_writebits(sc, MII_PREAMBLE, 32);
2004     tulip_mii_writebits(sc, MII_RDCMD, 8);
2005     tulip_mii_writebits(sc, devaddr, 5);
2006     tulip_mii_writebits(sc, regno, 5);
2007     tulip_mii_turnaround(sc, MII_RDCMD);
2008 
2009     data = tulip_mii_readbits(sc);
2010 #if defined(TULIP_DEBUG)
2011     sc->tulip_dbg.dbg_phyregs[regno][0] = data;
2012     sc->tulip_dbg.dbg_phyregs[regno][1]++;
2013 #endif
2014     return data;
2015 }
2016 
2017 static void
tulip_mii_writereg(tulip_softc_t * const sc,unsigned devaddr,unsigned regno,unsigned data)2018 tulip_mii_writereg(tulip_softc_t * const sc, unsigned devaddr, unsigned regno,
2019     unsigned data)
2020 {
2021     unsigned csr = TULIP_CSR_READ(sc, csr_srom_mii) & (MII_RD|MII_DOUT|MII_CLK);
2022 
2023     TULIP_LOCK_ASSERT(sc);
2024     csr &= ~(MII_RD|MII_CLK); MII_EMIT;
2025     tulip_mii_writebits(sc, MII_PREAMBLE, 32);
2026     tulip_mii_writebits(sc, MII_WRCMD, 8);
2027     tulip_mii_writebits(sc, devaddr, 5);
2028     tulip_mii_writebits(sc, regno, 5);
2029     tulip_mii_turnaround(sc, MII_WRCMD);
2030     tulip_mii_writebits(sc, data, 16);
2031 #if defined(TULIP_DEBUG)
2032     sc->tulip_dbg.dbg_phyregs[regno][2] = data;
2033     sc->tulip_dbg.dbg_phyregs[regno][3]++;
2034 #endif
2035 }
2036 
2037 #define	tulip_mchash(mca)	(ether_crc32_le(mca, 6) & 0x1FF)
2038 #define	tulip_srom_crcok(databuf)	( \
2039     ((ether_crc32_le(databuf, 126) & 0xFFFFU) ^ 0xFFFFU) == \
2040      ((databuf)[126] | ((databuf)[127] << 8)))
2041 
2042 static void
tulip_identify_dec_nic(tulip_softc_t * const sc)2043 tulip_identify_dec_nic(tulip_softc_t * const sc)
2044 {
2045     TULIP_LOCK_ASSERT(sc);
2046     strcpy(sc->tulip_boardid, "DEC ");
2047 #define D0	4
2048     if (sc->tulip_chipid <= TULIP_21040)
2049 	return;
2050     if (bcmp(sc->tulip_rombuf + 29, "DE500", 5) == 0
2051 	|| bcmp(sc->tulip_rombuf + 29, "DE450", 5) == 0) {
2052 	bcopy(sc->tulip_rombuf + 29, &sc->tulip_boardid[D0], 8);
2053 	sc->tulip_boardid[D0+8] = ' ';
2054     }
2055 #undef D0
2056 }
2057 
2058 static void
tulip_identify_znyx_nic(tulip_softc_t * const sc)2059 tulip_identify_znyx_nic(tulip_softc_t * const sc)
2060 {
2061     unsigned id = 0;
2062 
2063     TULIP_LOCK_ASSERT(sc);
2064     strcpy(sc->tulip_boardid, "ZNYX ZX3XX ");
2065     if (sc->tulip_chipid == TULIP_21140 || sc->tulip_chipid == TULIP_21140A) {
2066 	unsigned znyx_ptr;
2067 	sc->tulip_boardid[8] = '4';
2068 	znyx_ptr = sc->tulip_rombuf[124] + 256 * sc->tulip_rombuf[125];
2069 	if (znyx_ptr < 26 || znyx_ptr > 116) {
2070 	    sc->tulip_boardsw = &tulip_21140_znyx_zx34x_boardsw;
2071 	    return;
2072 	}
2073 	/* ZX344 = 0010 .. 0013FF
2074 	 */
2075 	if (sc->tulip_rombuf[znyx_ptr] == 0x4A
2076 		&& sc->tulip_rombuf[znyx_ptr + 1] == 0x52
2077 		&& sc->tulip_rombuf[znyx_ptr + 2] == 0x01) {
2078 	    id = sc->tulip_rombuf[znyx_ptr + 5] + 256 * sc->tulip_rombuf[znyx_ptr + 4];
2079 	    if ((id >> 8) == (TULIP_ZNYX_ID_ZX342 >> 8)) {
2080 		sc->tulip_boardid[9] = '2';
2081 		if (id == TULIP_ZNYX_ID_ZX342B) {
2082 		    sc->tulip_boardid[10] = 'B';
2083 		    sc->tulip_boardid[11] = ' ';
2084 		}
2085 		sc->tulip_boardsw = &tulip_21140_znyx_zx34x_boardsw;
2086 	    } else if (id == TULIP_ZNYX_ID_ZX344) {
2087 		sc->tulip_boardid[10] = '4';
2088 		sc->tulip_boardsw = &tulip_21140_znyx_zx34x_boardsw;
2089 	    } else if (id == TULIP_ZNYX_ID_ZX345) {
2090 		sc->tulip_boardid[9] = (sc->tulip_rombuf[19] > 1) ? '8' : '5';
2091 	    } else if (id == TULIP_ZNYX_ID_ZX346) {
2092 		sc->tulip_boardid[9] = '6';
2093 	    } else if (id == TULIP_ZNYX_ID_ZX351) {
2094 		sc->tulip_boardid[8] = '5';
2095 		sc->tulip_boardid[9] = '1';
2096 	    }
2097 	}
2098 	if (id == 0) {
2099 	    /*
2100 	     * Assume it's a ZX342...
2101 	     */
2102 	    sc->tulip_boardsw = &tulip_21140_znyx_zx34x_boardsw;
2103 	}
2104 	return;
2105     }
2106     sc->tulip_boardid[8] = '1';
2107     if (sc->tulip_chipid == TULIP_21041) {
2108 	sc->tulip_boardid[10] = '1';
2109 	return;
2110     }
2111     if (sc->tulip_rombuf[32] == 0x4A && sc->tulip_rombuf[33] == 0x52) {
2112 	id = sc->tulip_rombuf[37] + 256 * sc->tulip_rombuf[36];
2113 	if (id == TULIP_ZNYX_ID_ZX312T) {
2114 	    sc->tulip_boardid[9] = '2';
2115 	    sc->tulip_boardid[10] = 'T';
2116 	    sc->tulip_boardid[11] = ' ';
2117 	    sc->tulip_boardsw = &tulip_21040_10baset_only_boardsw;
2118 	} else if (id == TULIP_ZNYX_ID_ZX314_INTA) {
2119 	    sc->tulip_boardid[9] = '4';
2120 	    sc->tulip_boardsw = &tulip_21040_10baset_only_boardsw;
2121 	    sc->tulip_features |= TULIP_HAVE_SHAREDINTR|TULIP_HAVE_BASEROM;
2122 	} else if (id == TULIP_ZNYX_ID_ZX314) {
2123 	    sc->tulip_boardid[9] = '4';
2124 	    sc->tulip_boardsw = &tulip_21040_10baset_only_boardsw;
2125 	    sc->tulip_features |= TULIP_HAVE_BASEROM;
2126 	} else if (id == TULIP_ZNYX_ID_ZX315_INTA) {
2127 	    sc->tulip_boardid[9] = '5';
2128 	    sc->tulip_features |= TULIP_HAVE_SHAREDINTR|TULIP_HAVE_BASEROM;
2129 	} else if (id == TULIP_ZNYX_ID_ZX315) {
2130 	    sc->tulip_boardid[9] = '5';
2131 	    sc->tulip_features |= TULIP_HAVE_BASEROM;
2132 	} else {
2133 	    id = 0;
2134 	}
2135     }
2136     if (id == 0) {
2137 	if ((sc->tulip_enaddr[3] & ~3) == 0xF0 && (sc->tulip_enaddr[5] & 2) == 0) {
2138 	    sc->tulip_boardid[9] = '4';
2139 	    sc->tulip_boardsw = &tulip_21040_10baset_only_boardsw;
2140 	    sc->tulip_features |= TULIP_HAVE_SHAREDINTR|TULIP_HAVE_BASEROM;
2141 	} else if ((sc->tulip_enaddr[3] & ~3) == 0xF4 && (sc->tulip_enaddr[5] & 1) == 0) {
2142 	    sc->tulip_boardid[9] = '5';
2143 	    sc->tulip_boardsw = &tulip_21040_boardsw;
2144 	    sc->tulip_features |= TULIP_HAVE_SHAREDINTR|TULIP_HAVE_BASEROM;
2145 	} else if ((sc->tulip_enaddr[3] & ~3) == 0xEC) {
2146 	    sc->tulip_boardid[9] = '2';
2147 	    sc->tulip_boardsw = &tulip_21040_boardsw;
2148 	}
2149     }
2150 }
2151 
2152 static void
tulip_identify_smc_nic(tulip_softc_t * const sc)2153 tulip_identify_smc_nic(tulip_softc_t * const sc)
2154 {
2155     u_int32_t id1, id2, ei;
2156     int auibnc = 0, utp = 0;
2157     char *cp;
2158 
2159     TULIP_LOCK_ASSERT(sc);
2160     strcpy(sc->tulip_boardid, "SMC ");
2161     if (sc->tulip_chipid == TULIP_21041)
2162 	return;
2163     if (sc->tulip_chipid != TULIP_21040) {
2164 	if (sc->tulip_boardsw != &tulip_2114x_isv_boardsw) {
2165 	    strcpy(&sc->tulip_boardid[4], "9332DST ");
2166 	    sc->tulip_boardsw = &tulip_21140_smc9332_boardsw;
2167 	} else if (sc->tulip_features & (TULIP_HAVE_BASEROM|TULIP_HAVE_SLAVEDROM)) {
2168 	    strcpy(&sc->tulip_boardid[4], "9334BDT ");
2169 	} else {
2170 	    strcpy(&sc->tulip_boardid[4], "9332BDT ");
2171 	}
2172 	return;
2173     }
2174     id1 = sc->tulip_rombuf[0x60] | (sc->tulip_rombuf[0x61] << 8);
2175     id2 = sc->tulip_rombuf[0x62] | (sc->tulip_rombuf[0x63] << 8);
2176     ei  = sc->tulip_rombuf[0x66] | (sc->tulip_rombuf[0x67] << 8);
2177 
2178     strcpy(&sc->tulip_boardid[4], "8432");
2179     cp = &sc->tulip_boardid[8];
2180     if ((id1 & 1) == 0)
2181 	*cp++ = 'B', auibnc = 1;
2182     if ((id1 & 0xFF) > 0x32)
2183 	*cp++ = 'T', utp = 1;
2184     if ((id1 & 0x4000) == 0)
2185 	*cp++ = 'A', auibnc = 1;
2186     if (id2 == 0x15) {
2187 	sc->tulip_boardid[7] = '4';
2188 	*cp++ = '-';
2189 	*cp++ = 'C';
2190 	*cp++ = 'H';
2191 	*cp++ = (ei ? '2' : '1');
2192     }
2193     *cp++ = ' ';
2194     *cp = '\0';
2195     if (utp && !auibnc)
2196 	sc->tulip_boardsw = &tulip_21040_10baset_only_boardsw;
2197     else if (!utp && auibnc)
2198 	sc->tulip_boardsw = &tulip_21040_auibnc_only_boardsw;
2199 }
2200 
2201 static void
tulip_identify_cogent_nic(tulip_softc_t * const sc)2202 tulip_identify_cogent_nic(tulip_softc_t * const sc)
2203 {
2204     TULIP_LOCK_ASSERT(sc);
2205     strcpy(sc->tulip_boardid, "Cogent ");
2206     if (sc->tulip_chipid == TULIP_21140 || sc->tulip_chipid == TULIP_21140A) {
2207 	if (sc->tulip_rombuf[32] == TULIP_COGENT_EM100TX_ID) {
2208 	    strcat(sc->tulip_boardid, "EM100TX ");
2209 	    sc->tulip_boardsw = &tulip_21140_cogent_em100_boardsw;
2210 #if defined(TULIP_COGENT_EM110TX_ID)
2211 	} else if (sc->tulip_rombuf[32] == TULIP_COGENT_EM110TX_ID) {
2212 	    strcat(sc->tulip_boardid, "EM110TX ");
2213 	    sc->tulip_boardsw = &tulip_21140_cogent_em100_boardsw;
2214 #endif
2215 	} else if (sc->tulip_rombuf[32] == TULIP_COGENT_EM100FX_ID) {
2216 	    strcat(sc->tulip_boardid, "EM100FX ");
2217 	    sc->tulip_boardsw = &tulip_21140_cogent_em100_boardsw;
2218 	}
2219 	/*
2220 	 * Magic number (0x24001109U) is the SubVendor (0x2400) and
2221 	 * SubDevId (0x1109) for the ANA6944TX (EM440TX).
2222 	 */
2223 	if (*(u_int32_t *) sc->tulip_rombuf == 0x24001109U
2224 		&& (sc->tulip_features & TULIP_HAVE_BASEROM)) {
2225 	    /*
2226 	     * Cogent (Adaptec) is still mapping all INTs to INTA of
2227 	     * first 21140.  Dumb!  Dumb!
2228 	     */
2229 	    strcat(sc->tulip_boardid, "EM440TX ");
2230 	    sc->tulip_features |= TULIP_HAVE_SHAREDINTR;
2231 	}
2232     } else if (sc->tulip_chipid == TULIP_21040) {
2233 	sc->tulip_features |= TULIP_HAVE_SHAREDINTR|TULIP_HAVE_BASEROM;
2234     }
2235 }
2236 
2237 static void
tulip_identify_accton_nic(tulip_softc_t * const sc)2238 tulip_identify_accton_nic(tulip_softc_t * const sc)
2239 {
2240     TULIP_LOCK_ASSERT(sc);
2241     strcpy(sc->tulip_boardid, "ACCTON ");
2242     switch (sc->tulip_chipid) {
2243 	case TULIP_21140A:
2244 	    strcat(sc->tulip_boardid, "EN1207 ");
2245 	    if (sc->tulip_boardsw != &tulip_2114x_isv_boardsw)
2246 		sc->tulip_boardsw = &tulip_21140_accton_boardsw;
2247 	    break;
2248 	case TULIP_21140:
2249 	    strcat(sc->tulip_boardid, "EN1207TX ");
2250 	    if (sc->tulip_boardsw != &tulip_2114x_isv_boardsw)
2251 		sc->tulip_boardsw = &tulip_21140_eb_boardsw;
2252             break;
2253         case TULIP_21040:
2254 	    strcat(sc->tulip_boardid, "EN1203 ");
2255             sc->tulip_boardsw = &tulip_21040_boardsw;
2256             break;
2257         case TULIP_21041:
2258 	    strcat(sc->tulip_boardid, "EN1203 ");
2259             sc->tulip_boardsw = &tulip_21041_boardsw;
2260             break;
2261 	default:
2262             sc->tulip_boardsw = &tulip_2114x_isv_boardsw;
2263             break;
2264     }
2265 }
2266 
2267 static void
tulip_identify_asante_nic(tulip_softc_t * const sc)2268 tulip_identify_asante_nic(tulip_softc_t * const sc)
2269 {
2270     TULIP_LOCK_ASSERT(sc);
2271     strcpy(sc->tulip_boardid, "Asante ");
2272     if ((sc->tulip_chipid == TULIP_21140 || sc->tulip_chipid == TULIP_21140A)
2273 	    && sc->tulip_boardsw != &tulip_2114x_isv_boardsw) {
2274 	tulip_media_info_t *mi = sc->tulip_mediainfo;
2275 	int idx;
2276 	/*
2277 	 * The Asante Fast Ethernet doesn't always ship with a valid
2278 	 * new format SROM.  So if isn't in the new format, we cheat
2279 	 * set it up as if we had.
2280 	 */
2281 
2282 	sc->tulip_gpinit = TULIP_GP_ASANTE_PINS;
2283 	sc->tulip_gpdata = 0;
2284 
2285 	TULIP_CSR_WRITE(sc, csr_gp, TULIP_GP_ASANTE_PINS|TULIP_GP_PINSET);
2286 	TULIP_CSR_WRITE(sc, csr_gp, TULIP_GP_ASANTE_PHYRESET);
2287 	DELAY(100);
2288 	TULIP_CSR_WRITE(sc, csr_gp, 0);
2289 
2290 	mi->mi_type = TULIP_MEDIAINFO_MII;
2291 	mi->mi_gpr_length = 0;
2292 	mi->mi_gpr_offset = 0;
2293 	mi->mi_reset_length = 0;
2294 	mi->mi_reset_offset = 0;
2295 
2296 	mi->mi_phyaddr = TULIP_MII_NOPHY;
2297 	for (idx = 20; idx > 0 && mi->mi_phyaddr == TULIP_MII_NOPHY; idx--) {
2298 	    DELAY(10000);
2299 	    mi->mi_phyaddr = tulip_mii_get_phyaddr(sc, 0);
2300 	}
2301 	if (mi->mi_phyaddr == TULIP_MII_NOPHY) {
2302 	    device_printf(sc->tulip_dev, "can't find phy 0\n");
2303 	    return;
2304 	}
2305 
2306 	sc->tulip_features |= TULIP_HAVE_MII;
2307 	mi->mi_capabilities  = PHYSTS_10BASET|PHYSTS_10BASET_FD|PHYSTS_100BASETX|PHYSTS_100BASETX_FD;
2308 	mi->mi_advertisement = PHYSTS_10BASET|PHYSTS_10BASET_FD|PHYSTS_100BASETX|PHYSTS_100BASETX_FD;
2309 	mi->mi_full_duplex   = PHYSTS_10BASET_FD|PHYSTS_100BASETX_FD;
2310 	mi->mi_tx_threshold  = PHYSTS_10BASET|PHYSTS_10BASET_FD;
2311 	TULIP_MEDIAINFO_ADD_CAPABILITY(sc, mi, 100BASETX_FD);
2312 	TULIP_MEDIAINFO_ADD_CAPABILITY(sc, mi, 100BASETX);
2313 	TULIP_MEDIAINFO_ADD_CAPABILITY(sc, mi, 100BASET4);
2314 	TULIP_MEDIAINFO_ADD_CAPABILITY(sc, mi, 10BASET_FD);
2315 	TULIP_MEDIAINFO_ADD_CAPABILITY(sc, mi, 10BASET);
2316 	mi->mi_phyid = (tulip_mii_readreg(sc, mi->mi_phyaddr, PHYREG_IDLOW) << 16) |
2317 	    tulip_mii_readreg(sc, mi->mi_phyaddr, PHYREG_IDHIGH);
2318 
2319 	sc->tulip_boardsw = &tulip_2114x_isv_boardsw;
2320     }
2321 }
2322 
2323 static void
tulip_identify_compex_nic(tulip_softc_t * const sc)2324 tulip_identify_compex_nic(tulip_softc_t * const sc)
2325 {
2326     TULIP_LOCK_ASSERT(sc);
2327     strcpy(sc->tulip_boardid, "COMPEX ");
2328     if (sc->tulip_chipid == TULIP_21140A) {
2329 	int root_unit;
2330 	tulip_softc_t *root_sc = NULL;
2331 
2332 	strcat(sc->tulip_boardid, "400TX/PCI ");
2333 	/*
2334 	 * All 4 chips on these boards share an interrupt.  This code
2335 	 * copied from tulip_read_macaddr.
2336 	 */
2337 	sc->tulip_features |= TULIP_HAVE_SHAREDINTR;
2338 	for (root_unit = sc->tulip_unit - 1; root_unit >= 0; root_unit--) {
2339 	    root_sc = tulips[root_unit];
2340 	    if (root_sc == NULL
2341 		|| !(root_sc->tulip_features & TULIP_HAVE_SLAVEDINTR))
2342 		break;
2343 	    root_sc = NULL;
2344 	}
2345 	if (root_sc != NULL
2346 	    && root_sc->tulip_chipid == sc->tulip_chipid
2347 	    && root_sc->tulip_pci_busno == sc->tulip_pci_busno) {
2348 	    sc->tulip_features |= TULIP_HAVE_SLAVEDINTR;
2349 	    sc->tulip_slaves = root_sc->tulip_slaves;
2350 	    root_sc->tulip_slaves = sc;
2351 	} else if(sc->tulip_features & TULIP_HAVE_SLAVEDINTR) {
2352 	    printf("\nCannot find master device for %s interrupts",
2353 		   sc->tulip_ifp->if_xname);
2354 	}
2355     } else {
2356 	strcat(sc->tulip_boardid, "unknown ");
2357     }
2358     /*      sc->tulip_boardsw = &tulip_21140_eb_boardsw; */
2359     return;
2360 }
2361 
2362 static int
tulip_srom_decode(tulip_softc_t * const sc)2363 tulip_srom_decode(tulip_softc_t * const sc)
2364 {
2365     unsigned idx1, idx2, idx3;
2366 
2367     const tulip_srom_header_t *shp = (const tulip_srom_header_t *) &sc->tulip_rombuf[0];
2368     const tulip_srom_adapter_info_t *saip = (const tulip_srom_adapter_info_t *) (shp + 1);
2369     tulip_srom_media_t srom_media;
2370     tulip_media_info_t *mi = sc->tulip_mediainfo;
2371     const u_int8_t *dp;
2372     u_int32_t leaf_offset, blocks, data;
2373 
2374     TULIP_LOCK_ASSERT(sc);
2375     for (idx1 = 0; idx1 < shp->sh_adapter_count; idx1++, saip++) {
2376 	if (shp->sh_adapter_count == 1)
2377 	    break;
2378 	if (saip->sai_device == sc->tulip_pci_devno)
2379 	    break;
2380     }
2381     /*
2382      * Didn't find the right media block for this card.
2383      */
2384     if (idx1 == shp->sh_adapter_count)
2385 	return 0;
2386 
2387     /*
2388      * Save the hardware address.
2389      */
2390     bcopy(shp->sh_ieee802_address, sc->tulip_enaddr, 6);
2391     /*
2392      * If this is a multiple port card, add the adapter index to the last
2393      * byte of the hardware address.  (if it isn't multiport, adding 0
2394      * won't hurt.
2395      */
2396     sc->tulip_enaddr[5] += idx1;
2397 
2398     leaf_offset = saip->sai_leaf_offset_lowbyte
2399 	+ saip->sai_leaf_offset_highbyte * 256;
2400     dp = sc->tulip_rombuf + leaf_offset;
2401 
2402     sc->tulip_conntype = (tulip_srom_connection_t) (dp[0] + dp[1] * 256); dp += 2;
2403 
2404     for (idx2 = 0;; idx2++) {
2405 	if (tulip_srom_conninfo[idx2].sc_type == sc->tulip_conntype
2406 	        || tulip_srom_conninfo[idx2].sc_type == TULIP_SROM_CONNTYPE_NOT_USED)
2407 	    break;
2408     }
2409     sc->tulip_connidx = idx2;
2410 
2411     if (sc->tulip_chipid == TULIP_21041) {
2412 	blocks = *dp++;
2413 	for (idx2 = 0; idx2 < blocks; idx2++) {
2414 	    tulip_media_t media;
2415 	    data = *dp++;
2416 	    srom_media = (tulip_srom_media_t) (data & 0x3F);
2417 	    for (idx3 = 0; tulip_srom_mediums[idx3].sm_type != TULIP_MEDIA_UNKNOWN; idx3++) {
2418 		if (tulip_srom_mediums[idx3].sm_srom_type == srom_media)
2419 		    break;
2420 	    }
2421 	    media = tulip_srom_mediums[idx3].sm_type;
2422 	    if (media != TULIP_MEDIA_UNKNOWN) {
2423 		if (data & TULIP_SROM_21041_EXTENDED) {
2424 		    mi->mi_type = TULIP_MEDIAINFO_SIA;
2425 		    sc->tulip_mediums[media] = mi;
2426 		    mi->mi_sia_connectivity = dp[0] + dp[1] * 256;
2427 		    mi->mi_sia_tx_rx        = dp[2] + dp[3] * 256;
2428 		    mi->mi_sia_general      = dp[4] + dp[5] * 256;
2429 		    mi++;
2430 		} else {
2431 		    switch (media) {
2432 			case TULIP_MEDIA_BNC: {
2433 			    TULIP_MEDIAINFO_SIA_INIT(sc, mi, 21041, BNC);
2434 			    mi++;
2435 			    break;
2436 			}
2437 			case TULIP_MEDIA_AUI: {
2438 			    TULIP_MEDIAINFO_SIA_INIT(sc, mi, 21041, AUI);
2439 			    mi++;
2440 			    break;
2441 			}
2442 			case TULIP_MEDIA_10BASET: {
2443 			    TULIP_MEDIAINFO_SIA_INIT(sc, mi, 21041, 10BASET);
2444 			    mi++;
2445 			    break;
2446 			}
2447 			case TULIP_MEDIA_10BASET_FD: {
2448 			    TULIP_MEDIAINFO_SIA_INIT(sc, mi, 21041, 10BASET_FD);
2449 			    mi++;
2450 			    break;
2451 			}
2452 			default: {
2453 			    break;
2454 			}
2455 		    }
2456 		}
2457 	    }
2458 	    if (data & TULIP_SROM_21041_EXTENDED)
2459 		dp += 6;
2460 	}
2461 #ifdef notdef
2462 	if (blocks == 0) {
2463 	    TULIP_MEDIAINFO_SIA_INIT(sc, mi, 21041, BNC); mi++;
2464 	    TULIP_MEDIAINFO_SIA_INIT(sc, mi, 21041, AUI); mi++;
2465 	    TULIP_MEDIAINFO_SIA_INIT(sc, mi, 21041, 10BASET); mi++;
2466 	    TULIP_MEDIAINFO_SIA_INIT(sc, mi, 21041, 10BASET_FD); mi++;
2467 	}
2468 #endif
2469     } else {
2470 	unsigned length, type;
2471 	tulip_media_t gp_media = TULIP_MEDIA_UNKNOWN;
2472 	if (sc->tulip_features & TULIP_HAVE_GPR)
2473 	    sc->tulip_gpinit = *dp++;
2474 	blocks = *dp++;
2475 	for (idx2 = 0; idx2 < blocks; idx2++) {
2476 	    const u_int8_t *ep;
2477 	    if ((*dp & 0x80) == 0) {
2478 		length = 4;
2479 		type = 0;
2480 	    } else {
2481 		length = (*dp++ & 0x7f) - 1;
2482 		type = *dp++ & 0x3f;
2483 	    }
2484 	    ep = dp + length;
2485 	    switch (type & 0x3f) {
2486 		case 0: {	/* 21140[A] GPR block */
2487 		    tulip_media_t media;
2488 		    srom_media = (tulip_srom_media_t)(dp[0] & 0x3f);
2489 		    for (idx3 = 0; tulip_srom_mediums[idx3].sm_type != TULIP_MEDIA_UNKNOWN; idx3++) {
2490 			if (tulip_srom_mediums[idx3].sm_srom_type == srom_media)
2491 			    break;
2492 		    }
2493 		    media = tulip_srom_mediums[idx3].sm_type;
2494 		    if (media == TULIP_MEDIA_UNKNOWN)
2495 			break;
2496 		    mi->mi_type = TULIP_MEDIAINFO_GPR;
2497 		    sc->tulip_mediums[media] = mi;
2498 		    mi->mi_gpdata = dp[1];
2499 		    if (media > gp_media && !TULIP_IS_MEDIA_FD(media)) {
2500 			sc->tulip_gpdata = mi->mi_gpdata;
2501 			gp_media = media;
2502 		    }
2503 		    data = dp[2] + dp[3] * 256;
2504 		    mi->mi_cmdmode = TULIP_SROM_2114X_CMDBITS(data);
2505 		    if (data & TULIP_SROM_2114X_NOINDICATOR) {
2506 			mi->mi_actmask = 0;
2507 		    } else {
2508 #if 0
2509 			mi->mi_default = (data & TULIP_SROM_2114X_DEFAULT) != 0;
2510 #endif
2511 			mi->mi_actmask = TULIP_SROM_2114X_BITPOS(data);
2512 			mi->mi_actdata = (data & TULIP_SROM_2114X_POLARITY) ? 0 : mi->mi_actmask;
2513 		    }
2514 		    mi++;
2515 		    break;
2516 		}
2517 		case 1: {	/* 21140[A] MII block */
2518 		    const unsigned phyno = *dp++;
2519 		    mi->mi_type = TULIP_MEDIAINFO_MII;
2520 		    mi->mi_gpr_length = *dp++;
2521 		    mi->mi_gpr_offset = dp - sc->tulip_rombuf;
2522 		    dp += mi->mi_gpr_length;
2523 		    mi->mi_reset_length = *dp++;
2524 		    mi->mi_reset_offset = dp - sc->tulip_rombuf;
2525 		    dp += mi->mi_reset_length;
2526 
2527 		    /*
2528 		     * Before we probe for a PHY, use the GPR information
2529 		     * to select it.  If we don't, it may be inaccessible.
2530 		     */
2531 		    TULIP_CSR_WRITE(sc, csr_gp, sc->tulip_gpinit|TULIP_GP_PINSET);
2532 		    for (idx3 = 0; idx3 < mi->mi_reset_length; idx3++) {
2533 			DELAY(10);
2534 			TULIP_CSR_WRITE(sc, csr_gp, sc->tulip_rombuf[mi->mi_reset_offset + idx3]);
2535 		    }
2536 		    sc->tulip_phyaddr = mi->mi_phyaddr;
2537 		    for (idx3 = 0; idx3 < mi->mi_gpr_length; idx3++) {
2538 			DELAY(10);
2539 			TULIP_CSR_WRITE(sc, csr_gp, sc->tulip_rombuf[mi->mi_gpr_offset + idx3]);
2540 		    }
2541 
2542 		    /*
2543 		     * At least write something!
2544 		     */
2545 		    if (mi->mi_reset_length == 0 && mi->mi_gpr_length == 0)
2546 			TULIP_CSR_WRITE(sc, csr_gp, 0);
2547 
2548 		    mi->mi_phyaddr = TULIP_MII_NOPHY;
2549 		    for (idx3 = 20; idx3 > 0 && mi->mi_phyaddr == TULIP_MII_NOPHY; idx3--) {
2550 			DELAY(10000);
2551 			mi->mi_phyaddr = tulip_mii_get_phyaddr(sc, phyno);
2552 		    }
2553 		    if (mi->mi_phyaddr == TULIP_MII_NOPHY) {
2554 #if defined(TULIP_DEBUG)
2555 			device_printf(sc->tulip_dev, "can't find phy %d\n",
2556 			    phyno);
2557 #endif
2558 			break;
2559 		    }
2560 		    sc->tulip_features |= TULIP_HAVE_MII;
2561 		    mi->mi_capabilities  = dp[0] + dp[1] * 256; dp += 2;
2562 		    mi->mi_advertisement = dp[0] + dp[1] * 256; dp += 2;
2563 		    mi->mi_full_duplex   = dp[0] + dp[1] * 256; dp += 2;
2564 		    mi->mi_tx_threshold  = dp[0] + dp[1] * 256; dp += 2;
2565 		    TULIP_MEDIAINFO_ADD_CAPABILITY(sc, mi, 100BASETX_FD);
2566 		    TULIP_MEDIAINFO_ADD_CAPABILITY(sc, mi, 100BASETX);
2567 		    TULIP_MEDIAINFO_ADD_CAPABILITY(sc, mi, 100BASET4);
2568 		    TULIP_MEDIAINFO_ADD_CAPABILITY(sc, mi, 10BASET_FD);
2569 		    TULIP_MEDIAINFO_ADD_CAPABILITY(sc, mi, 10BASET);
2570 		    mi->mi_phyid = (tulip_mii_readreg(sc, mi->mi_phyaddr, PHYREG_IDLOW) << 16) |
2571 			tulip_mii_readreg(sc, mi->mi_phyaddr, PHYREG_IDHIGH);
2572 		    mi++;
2573 		    break;
2574 		}
2575 		case 2: {	/* 2114[23] SIA block */
2576 		    tulip_media_t media;
2577 		    srom_media = (tulip_srom_media_t)(dp[0] & 0x3f);
2578 		    for (idx3 = 0; tulip_srom_mediums[idx3].sm_type != TULIP_MEDIA_UNKNOWN; idx3++) {
2579 			if (tulip_srom_mediums[idx3].sm_srom_type == srom_media)
2580 			    break;
2581 		    }
2582 		    media = tulip_srom_mediums[idx3].sm_type;
2583 		    if (media == TULIP_MEDIA_UNKNOWN)
2584 			break;
2585 		    mi->mi_type = TULIP_MEDIAINFO_SIA;
2586 		    sc->tulip_mediums[media] = mi;
2587 		    if (dp[0] & 0x40) {
2588 			mi->mi_sia_connectivity = dp[1] + dp[2] * 256;
2589 			mi->mi_sia_tx_rx        = dp[3] + dp[4] * 256;
2590 			mi->mi_sia_general      = dp[5] + dp[6] * 256;
2591 			dp += 6;
2592 		    } else {
2593 			switch (media) {
2594 			    case TULIP_MEDIA_BNC: {
2595 				TULIP_MEDIAINFO_SIA_INIT(sc, mi, 21142, BNC);
2596 				break;
2597 			    }
2598 			    case TULIP_MEDIA_AUI: {
2599 				TULIP_MEDIAINFO_SIA_INIT(sc, mi, 21142, AUI);
2600 				break;
2601 			    }
2602 			    case TULIP_MEDIA_10BASET: {
2603 				TULIP_MEDIAINFO_SIA_INIT(sc, mi, 21142, 10BASET);
2604 				sc->tulip_intrmask |= TULIP_STS_LINKPASS|TULIP_STS_LINKFAIL;
2605 				break;
2606 			    }
2607 			    case TULIP_MEDIA_10BASET_FD: {
2608 				TULIP_MEDIAINFO_SIA_INIT(sc, mi, 21142, 10BASET_FD);
2609 				sc->tulip_intrmask |= TULIP_STS_LINKPASS|TULIP_STS_LINKFAIL;
2610 				break;
2611 			    }
2612 			    default: {
2613 				goto bad_media;
2614 			    }
2615 			}
2616 		    }
2617 		    mi->mi_sia_gp_control = (dp[1] + dp[2] * 256) << 16;
2618 		    mi->mi_sia_gp_data    = (dp[3] + dp[4] * 256) << 16;
2619 		    mi++;
2620 		  bad_media:
2621 		    break;
2622 		}
2623 		case 3: {	/* 2114[23] MII PHY block */
2624 		    const unsigned phyno = *dp++;
2625 		    const u_int8_t *dp0;
2626 		    mi->mi_type = TULIP_MEDIAINFO_MII;
2627 		    mi->mi_gpr_length = *dp++;
2628 		    mi->mi_gpr_offset = dp - sc->tulip_rombuf;
2629 		    dp += 2 * mi->mi_gpr_length;
2630 		    mi->mi_reset_length = *dp++;
2631 		    mi->mi_reset_offset = dp - sc->tulip_rombuf;
2632 		    dp += 2 * mi->mi_reset_length;
2633 
2634 		    dp0 = &sc->tulip_rombuf[mi->mi_reset_offset];
2635 		    for (idx3 = 0; idx3 < mi->mi_reset_length; idx3++, dp0 += 2) {
2636 			DELAY(10);
2637 			TULIP_CSR_WRITE(sc, csr_sia_general, (dp0[0] + 256 * dp0[1]) << 16);
2638 		    }
2639 		    sc->tulip_phyaddr = mi->mi_phyaddr;
2640 		    dp0 = &sc->tulip_rombuf[mi->mi_gpr_offset];
2641 		    for (idx3 = 0; idx3 < mi->mi_gpr_length; idx3++, dp0 += 2) {
2642 			DELAY(10);
2643 			TULIP_CSR_WRITE(sc, csr_sia_general, (dp0[0] + 256 * dp0[1]) << 16);
2644 		    }
2645 
2646 		    if (mi->mi_reset_length == 0 && mi->mi_gpr_length == 0)
2647 			TULIP_CSR_WRITE(sc, csr_sia_general, 0);
2648 
2649 		    mi->mi_phyaddr = TULIP_MII_NOPHY;
2650 		    for (idx3 = 20; idx3 > 0 && mi->mi_phyaddr == TULIP_MII_NOPHY; idx3--) {
2651 			DELAY(10000);
2652 			mi->mi_phyaddr = tulip_mii_get_phyaddr(sc, phyno);
2653 		    }
2654 		    if (mi->mi_phyaddr == TULIP_MII_NOPHY) {
2655 #if defined(TULIP_DEBUG)
2656 			device_printf(sc->tulip_dev, "can't find phy %d\n",
2657 			       phyno);
2658 #endif
2659 			break;
2660 		    }
2661 		    sc->tulip_features |= TULIP_HAVE_MII;
2662 		    mi->mi_capabilities  = dp[0] + dp[1] * 256; dp += 2;
2663 		    mi->mi_advertisement = dp[0] + dp[1] * 256; dp += 2;
2664 		    mi->mi_full_duplex   = dp[0] + dp[1] * 256; dp += 2;
2665 		    mi->mi_tx_threshold  = dp[0] + dp[1] * 256; dp += 2;
2666 		    mi->mi_mii_interrupt = dp[0] + dp[1] * 256; dp += 2;
2667 		    TULIP_MEDIAINFO_ADD_CAPABILITY(sc, mi, 100BASETX_FD);
2668 		    TULIP_MEDIAINFO_ADD_CAPABILITY(sc, mi, 100BASETX);
2669 		    TULIP_MEDIAINFO_ADD_CAPABILITY(sc, mi, 100BASET4);
2670 		    TULIP_MEDIAINFO_ADD_CAPABILITY(sc, mi, 10BASET_FD);
2671 		    TULIP_MEDIAINFO_ADD_CAPABILITY(sc, mi, 10BASET);
2672 		    mi->mi_phyid = (tulip_mii_readreg(sc, mi->mi_phyaddr, PHYREG_IDLOW) << 16) |
2673 			tulip_mii_readreg(sc, mi->mi_phyaddr, PHYREG_IDHIGH);
2674 		    mi++;
2675 		    break;
2676 		}
2677 		case 4: {	/* 21143 SYM block */
2678 		    tulip_media_t media;
2679 		    srom_media = (tulip_srom_media_t) dp[0];
2680 		    for (idx3 = 0; tulip_srom_mediums[idx3].sm_type != TULIP_MEDIA_UNKNOWN; idx3++) {
2681 			if (tulip_srom_mediums[idx3].sm_srom_type == srom_media)
2682 			    break;
2683 		    }
2684 		    media = tulip_srom_mediums[idx3].sm_type;
2685 		    if (media == TULIP_MEDIA_UNKNOWN)
2686 			break;
2687 		    mi->mi_type = TULIP_MEDIAINFO_SYM;
2688 		    sc->tulip_mediums[media] = mi;
2689 		    mi->mi_gpcontrol = (dp[1] + dp[2] * 256) << 16;
2690 		    mi->mi_gpdata    = (dp[3] + dp[4] * 256) << 16;
2691 		    data = dp[5] + dp[6] * 256;
2692 		    mi->mi_cmdmode = TULIP_SROM_2114X_CMDBITS(data);
2693 		    if (data & TULIP_SROM_2114X_NOINDICATOR) {
2694 			mi->mi_actmask = 0;
2695 		    } else {
2696 			mi->mi_default = (data & TULIP_SROM_2114X_DEFAULT) != 0;
2697 			mi->mi_actmask = TULIP_SROM_2114X_BITPOS(data);
2698 			mi->mi_actdata = (data & TULIP_SROM_2114X_POLARITY) ? 0 : mi->mi_actmask;
2699 		    }
2700 		    if (TULIP_IS_MEDIA_TP(media))
2701 			sc->tulip_intrmask |= TULIP_STS_LINKPASS|TULIP_STS_LINKFAIL;
2702 		    mi++;
2703 		    break;
2704 		}
2705 #if 0
2706 		case 5: {	/* 21143 Reset block */
2707 		    mi->mi_type = TULIP_MEDIAINFO_RESET;
2708 		    mi->mi_reset_length = *dp++;
2709 		    mi->mi_reset_offset = dp - sc->tulip_rombuf;
2710 		    dp += 2 * mi->mi_reset_length;
2711 		    mi++;
2712 		    break;
2713 		}
2714 #endif
2715 		default: {
2716 		}
2717 	    }
2718 	    dp = ep;
2719 	}
2720     }
2721     return mi - sc->tulip_mediainfo;
2722 }
2723 
2724 static const struct {
2725     void (*vendor_identify_nic)(tulip_softc_t * const sc);
2726     unsigned char vendor_oui[3];
2727 } tulip_vendors[] = {
2728     { tulip_identify_dec_nic,		{ 0x08, 0x00, 0x2B } },
2729     { tulip_identify_dec_nic,		{ 0x00, 0x00, 0xF8 } },
2730     { tulip_identify_smc_nic,		{ 0x00, 0x00, 0xC0 } },
2731     { tulip_identify_smc_nic,		{ 0x00, 0xE0, 0x29 } },
2732     { tulip_identify_znyx_nic,		{ 0x00, 0xC0, 0x95 } },
2733     { tulip_identify_cogent_nic,	{ 0x00, 0x00, 0x92 } },
2734     { tulip_identify_asante_nic,	{ 0x00, 0x00, 0x94 } },
2735     { tulip_identify_cogent_nic,	{ 0x00, 0x00, 0xD1 } },
2736     { tulip_identify_accton_nic,	{ 0x00, 0x00, 0xE8 } },
2737     { tulip_identify_compex_nic,        { 0x00, 0x80, 0x48 } },
2738     { NULL }
2739 };
2740 
2741 /*
2742  * This deals with the vagaries of the address roms and the
2743  * brain-deadness that various vendors commit in using them.
2744  */
2745 static int
tulip_read_macaddr(tulip_softc_t * const sc)2746 tulip_read_macaddr(tulip_softc_t * const sc)
2747 {
2748     unsigned cksum, rom_cksum, idx;
2749     u_int32_t csr;
2750     unsigned char tmpbuf[8];
2751     static const u_char testpat[] = { 0xFF, 0, 0x55, 0xAA, 0xFF, 0, 0x55, 0xAA };
2752 
2753     sc->tulip_connidx = TULIP_SROM_LASTCONNIDX;
2754 
2755     if (sc->tulip_chipid == TULIP_21040) {
2756 	TULIP_CSR_WRITE(sc, csr_enetrom, 1);
2757 	for (idx = 0; idx < sizeof(sc->tulip_rombuf); idx++) {
2758 	    int cnt = 0;
2759 	    while (((csr = TULIP_CSR_READ(sc, csr_enetrom)) & 0x80000000L) && cnt < 10000)
2760 		cnt++;
2761 	    sc->tulip_rombuf[idx] = csr & 0xFF;
2762 	}
2763 	sc->tulip_boardsw = &tulip_21040_boardsw;
2764     } else {
2765 	if (sc->tulip_chipid == TULIP_21041) {
2766 	    /*
2767 	     * Thankfully all 21041's act the same.
2768 	     */
2769 	    sc->tulip_boardsw = &tulip_21041_boardsw;
2770 	} else {
2771 	    /*
2772 	     * Assume all 21140 board are compatible with the
2773 	     * DEC 10/100 evaluation board.  Not really valid but
2774 	     * it's the best we can do until every one switches to
2775 	     * the new SROM format.
2776 	     */
2777 
2778 	    sc->tulip_boardsw = &tulip_21140_eb_boardsw;
2779 	}
2780 	tulip_srom_read(sc);
2781 	if (tulip_srom_crcok(sc->tulip_rombuf)) {
2782 	    /*
2783 	     * SROM CRC is valid therefore it must be in the
2784 	     * new format.
2785 	     */
2786 	    sc->tulip_features |= TULIP_HAVE_ISVSROM|TULIP_HAVE_OKSROM;
2787 	} else if (sc->tulip_rombuf[126] == 0xff && sc->tulip_rombuf[127] == 0xFF) {
2788 	    /*
2789 	     * No checksum is present.  See if the SROM id checks out;
2790 	     * the first 18 bytes should be 0 followed by a 1 followed
2791 	     * by the number of adapters (which we don't deal with yet).
2792 	     */
2793 	    for (idx = 0; idx < 18; idx++) {
2794 		if (sc->tulip_rombuf[idx] != 0)
2795 		    break;
2796 	    }
2797 	    if (idx == 18 && sc->tulip_rombuf[18] == 1 && sc->tulip_rombuf[19] != 0)
2798 		sc->tulip_features |= TULIP_HAVE_ISVSROM;
2799 	} else if (sc->tulip_chipid >= TULIP_21142) {
2800 	    sc->tulip_features |= TULIP_HAVE_ISVSROM;
2801 	    sc->tulip_boardsw = &tulip_2114x_isv_boardsw;
2802 	}
2803 	if ((sc->tulip_features & TULIP_HAVE_ISVSROM) && tulip_srom_decode(sc)) {
2804 	    if (sc->tulip_chipid != TULIP_21041)
2805 		sc->tulip_boardsw = &tulip_2114x_isv_boardsw;
2806 
2807 	    /*
2808 	     * If the SROM specifies more than one adapter, tag this as a
2809 	     * BASE rom.
2810 	     */
2811 	    if (sc->tulip_rombuf[19] > 1)
2812 		sc->tulip_features |= TULIP_HAVE_BASEROM;
2813 	    if (sc->tulip_boardsw == NULL)
2814 		return -6;
2815 	    goto check_oui;
2816 	}
2817     }
2818 
2819 
2820     if (bcmp(&sc->tulip_rombuf[0], &sc->tulip_rombuf[16], 8) != 0) {
2821 	/*
2822 	 * Some folks don't use the standard ethernet rom format
2823 	 * but instead just put the address in the first 6 bytes
2824 	 * of the rom and let the rest be all 0xffs.  (Can we say
2825 	 * ZNYX?) (well sometimes they put in a checksum so we'll
2826 	 * start at 8).
2827 	 */
2828 	for (idx = 8; idx < 32; idx++) {
2829 	    if (sc->tulip_rombuf[idx] != 0xFF)
2830 		return -4;
2831 	}
2832 	/*
2833 	 * Make sure the address is not multicast or locally assigned
2834 	 * that the OUI is not 00-00-00.
2835 	 */
2836 	if ((sc->tulip_rombuf[0] & 3) != 0)
2837 	    return -4;
2838 	if (sc->tulip_rombuf[0] == 0 && sc->tulip_rombuf[1] == 0
2839 		&& sc->tulip_rombuf[2] == 0)
2840 	    return -4;
2841 	bcopy(sc->tulip_rombuf, sc->tulip_enaddr, 6);
2842 	sc->tulip_features |= TULIP_HAVE_OKROM;
2843 	goto check_oui;
2844     } else {
2845 	/*
2846 	 * A number of makers of multiport boards (ZNYX and Cogent)
2847 	 * only put on one address ROM on their 21040 boards.  So
2848 	 * if the ROM is all zeros (or all 0xFFs), look at the
2849 	 * previous configured boards (as long as they are on the same
2850 	 * PCI bus and the bus number is non-zero) until we find the
2851 	 * master board with address ROM.  We then use its address ROM
2852 	 * as the base for this board.  (we add our relative board
2853 	 * to the last byte of its address).
2854 	 */
2855 	for (idx = 0; idx < sizeof(sc->tulip_rombuf); idx++) {
2856 	    if (sc->tulip_rombuf[idx] != 0 && sc->tulip_rombuf[idx] != 0xFF)
2857 		break;
2858 	}
2859 	if (idx == sizeof(sc->tulip_rombuf)) {
2860 	    int root_unit;
2861 	    tulip_softc_t *root_sc = NULL;
2862 	    for (root_unit = sc->tulip_unit - 1; root_unit >= 0; root_unit--) {
2863 		root_sc = tulips[root_unit];
2864 		if (root_sc == NULL || (root_sc->tulip_features & (TULIP_HAVE_OKROM|TULIP_HAVE_SLAVEDROM)) == TULIP_HAVE_OKROM)
2865 		    break;
2866 		root_sc = NULL;
2867 	    }
2868 	    if (root_sc != NULL && (root_sc->tulip_features & TULIP_HAVE_BASEROM)
2869 		    && root_sc->tulip_chipid == sc->tulip_chipid
2870 		    && root_sc->tulip_pci_busno == sc->tulip_pci_busno) {
2871 		sc->tulip_features |= TULIP_HAVE_SLAVEDROM;
2872 		sc->tulip_boardsw = root_sc->tulip_boardsw;
2873 		strcpy(sc->tulip_boardid, root_sc->tulip_boardid);
2874 		if (sc->tulip_boardsw->bd_type == TULIP_21140_ISV) {
2875 		    bcopy(root_sc->tulip_rombuf, sc->tulip_rombuf,
2876 			  sizeof(sc->tulip_rombuf));
2877 		    if (!tulip_srom_decode(sc))
2878 			return -5;
2879 		} else {
2880 		    bcopy(root_sc->tulip_enaddr, sc->tulip_enaddr, 6);
2881 		    sc->tulip_enaddr[5] += sc->tulip_unit - root_sc->tulip_unit;
2882 		}
2883 		/*
2884 		 * Now for a truly disgusting kludge: all 4 21040s on
2885 		 * the ZX314 share the same INTA line so the mapping
2886 		 * setup by the BIOS on the PCI bridge is worthless.
2887 		 * Rather than reprogramming the value in the config
2888 		 * register, we will handle this internally.
2889 		 */
2890 		if (root_sc->tulip_features & TULIP_HAVE_SHAREDINTR) {
2891 		    sc->tulip_slaves = root_sc->tulip_slaves;
2892 		    root_sc->tulip_slaves = sc;
2893 		    sc->tulip_features |= TULIP_HAVE_SLAVEDINTR;
2894 		}
2895 		return 0;
2896 	    }
2897 	}
2898     }
2899 
2900     /*
2901      * This is the standard DEC address ROM test.
2902      */
2903 
2904     if (bcmp(&sc->tulip_rombuf[24], testpat, 8) != 0)
2905 	return -3;
2906 
2907     tmpbuf[0] = sc->tulip_rombuf[15]; tmpbuf[1] = sc->tulip_rombuf[14];
2908     tmpbuf[2] = sc->tulip_rombuf[13]; tmpbuf[3] = sc->tulip_rombuf[12];
2909     tmpbuf[4] = sc->tulip_rombuf[11]; tmpbuf[5] = sc->tulip_rombuf[10];
2910     tmpbuf[6] = sc->tulip_rombuf[9];  tmpbuf[7] = sc->tulip_rombuf[8];
2911     if (bcmp(&sc->tulip_rombuf[0], tmpbuf, 8) != 0)
2912 	return -2;
2913 
2914     bcopy(sc->tulip_rombuf, sc->tulip_enaddr, 6);
2915 
2916     cksum = *(u_int16_t *) &sc->tulip_enaddr[0];
2917     cksum *= 2;
2918     if (cksum > 65535) cksum -= 65535;
2919     cksum += *(u_int16_t *) &sc->tulip_enaddr[2];
2920     if (cksum > 65535) cksum -= 65535;
2921     cksum *= 2;
2922     if (cksum > 65535) cksum -= 65535;
2923     cksum += *(u_int16_t *) &sc->tulip_enaddr[4];
2924     if (cksum >= 65535) cksum -= 65535;
2925 
2926     rom_cksum = *(u_int16_t *) &sc->tulip_rombuf[6];
2927 
2928     if (cksum != rom_cksum)
2929 	return -1;
2930 
2931   check_oui:
2932     /*
2933      * Check for various boards based on OUI.  Did I say braindead?
2934      */
2935     for (idx = 0; tulip_vendors[idx].vendor_identify_nic != NULL; idx++) {
2936 	if (bcmp(sc->tulip_enaddr, tulip_vendors[idx].vendor_oui, 3) == 0) {
2937 	    (*tulip_vendors[idx].vendor_identify_nic)(sc);
2938 	    break;
2939 	}
2940     }
2941 
2942     sc->tulip_features |= TULIP_HAVE_OKROM;
2943     return 0;
2944 }
2945 
2946 static void
tulip_ifmedia_add(tulip_softc_t * const sc)2947 tulip_ifmedia_add(tulip_softc_t * const sc)
2948 {
2949     tulip_media_t media;
2950     int medias = 0;
2951 
2952     TULIP_LOCK_ASSERT(sc);
2953     for (media = TULIP_MEDIA_UNKNOWN; media < TULIP_MEDIA_MAX; media++) {
2954 	if (sc->tulip_mediums[media] != NULL) {
2955 	    ifmedia_add(&sc->tulip_ifmedia, tulip_media_to_ifmedia[media],
2956 			0, 0);
2957 	    medias++;
2958 	}
2959     }
2960     if (medias == 0) {
2961 	sc->tulip_features |= TULIP_HAVE_NOMEDIA;
2962 	ifmedia_add(&sc->tulip_ifmedia, IFM_ETHER | IFM_NONE, 0, 0);
2963 	ifmedia_set(&sc->tulip_ifmedia, IFM_ETHER | IFM_NONE);
2964     } else if (sc->tulip_media == TULIP_MEDIA_UNKNOWN) {
2965 	ifmedia_add(&sc->tulip_ifmedia, IFM_ETHER | IFM_AUTO, 0, 0);
2966 	ifmedia_set(&sc->tulip_ifmedia, IFM_ETHER | IFM_AUTO);
2967     } else {
2968 	ifmedia_set(&sc->tulip_ifmedia, tulip_media_to_ifmedia[sc->tulip_media]);
2969 	sc->tulip_flags |= TULIP_PRINTMEDIA;
2970 	tulip_linkup(sc, sc->tulip_media);
2971     }
2972 }
2973 
2974 static int
tulip_ifmedia_change(struct ifnet * const ifp)2975 tulip_ifmedia_change(struct ifnet * const ifp)
2976 {
2977     tulip_softc_t * const sc = (tulip_softc_t *)ifp->if_softc;
2978 
2979     TULIP_LOCK(sc);
2980     sc->tulip_flags |= TULIP_NEEDRESET;
2981     sc->tulip_probe_state = TULIP_PROBE_INACTIVE;
2982     sc->tulip_media = TULIP_MEDIA_UNKNOWN;
2983     if (IFM_SUBTYPE(sc->tulip_ifmedia.ifm_media) != IFM_AUTO) {
2984 	tulip_media_t media;
2985 	for (media = TULIP_MEDIA_UNKNOWN; media < TULIP_MEDIA_MAX; media++) {
2986 	    if (sc->tulip_mediums[media] != NULL
2987 		&& sc->tulip_ifmedia.ifm_media == tulip_media_to_ifmedia[media]) {
2988 		sc->tulip_flags |= TULIP_PRINTMEDIA;
2989 		sc->tulip_flags &= ~TULIP_DIDNWAY;
2990 		tulip_linkup(sc, media);
2991 		TULIP_UNLOCK(sc);
2992 		return 0;
2993 	    }
2994 	}
2995     }
2996     sc->tulip_flags &= ~(TULIP_TXPROBE_ACTIVE|TULIP_WANTRXACT);
2997     tulip_reset(sc);
2998     tulip_init_locked(sc);
2999     TULIP_UNLOCK(sc);
3000     return 0;
3001 }
3002 
3003 /*
3004  * Media status callback
3005  */
3006 static void
tulip_ifmedia_status(struct ifnet * const ifp,struct ifmediareq * req)3007 tulip_ifmedia_status(struct ifnet * const ifp, struct ifmediareq *req)
3008 {
3009     tulip_softc_t *sc = (tulip_softc_t *)ifp->if_softc;
3010 
3011     TULIP_LOCK(sc);
3012     if (sc->tulip_media == TULIP_MEDIA_UNKNOWN) {
3013 	TULIP_UNLOCK(sc);
3014 	return;
3015     }
3016 
3017     req->ifm_status = IFM_AVALID;
3018     if (sc->tulip_flags & TULIP_LINKUP)
3019 	req->ifm_status |= IFM_ACTIVE;
3020 
3021     req->ifm_active = tulip_media_to_ifmedia[sc->tulip_media];
3022     TULIP_UNLOCK(sc);
3023 }
3024 
3025 static void
tulip_addr_filter(tulip_softc_t * const sc)3026 tulip_addr_filter(tulip_softc_t * const sc)
3027 {
3028     struct ifmultiaddr *ifma;
3029     struct ifnet *ifp;
3030     u_char *addrp;
3031     u_int16_t eaddr[ETHER_ADDR_LEN/2];
3032     int multicnt;
3033 
3034     TULIP_LOCK_ASSERT(sc);
3035     sc->tulip_flags &= ~(TULIP_WANTHASHPERFECT|TULIP_WANTHASHONLY|TULIP_ALLMULTI);
3036     sc->tulip_flags |= TULIP_WANTSETUP|TULIP_WANTTXSTART;
3037     sc->tulip_cmdmode &= ~TULIP_CMD_RXRUN;
3038     sc->tulip_intrmask &= ~TULIP_STS_RXSTOPPED;
3039 #if defined(IFF_ALLMULTI)
3040     if (sc->tulip_ifp->if_flags & IFF_ALLMULTI)
3041 	sc->tulip_flags |= TULIP_ALLMULTI ;
3042 #endif
3043 
3044     multicnt = 0;
3045     ifp = sc->tulip_ifp;
3046     if_maddr_rlock(ifp);
3047 
3048     /* Copy MAC address on stack to align. */
3049     if (ifp->if_input != NULL)
3050     	bcopy(IF_LLADDR(ifp), eaddr, ETHER_ADDR_LEN);
3051     else
3052 	bcopy(sc->tulip_enaddr, eaddr, ETHER_ADDR_LEN);
3053 
3054     TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
3055 
3056 	    if (ifma->ifma_addr->sa_family == AF_LINK)
3057 		multicnt++;
3058     }
3059 
3060     if (multicnt > 14) {
3061 	u_int32_t *sp = sc->tulip_setupdata;
3062 	unsigned hash;
3063 	/*
3064 	 * Some early passes of the 21140 have broken implementations of
3065 	 * hash-perfect mode.  When we get too many multicasts for perfect
3066 	 * filtering with these chips, we need to switch into hash-only
3067 	 * mode (this is better than all-multicast on network with lots
3068 	 * of multicast traffic).
3069 	 */
3070 	if (sc->tulip_features & TULIP_HAVE_BROKEN_HASH)
3071 	    sc->tulip_flags |= TULIP_WANTHASHONLY;
3072 	else
3073 	    sc->tulip_flags |= TULIP_WANTHASHPERFECT;
3074 	/*
3075 	 * If we have more than 14 multicasts, we have
3076 	 * go into hash perfect mode (512 bit multicast
3077 	 * hash and one perfect hardware).
3078 	 */
3079 	bzero(sc->tulip_setupdata, sizeof(sc->tulip_setupdata));
3080 
3081 	TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
3082 
3083 		if (ifma->ifma_addr->sa_family != AF_LINK)
3084 			continue;
3085 
3086 		hash = tulip_mchash(LLADDR((struct sockaddr_dl *)ifma->ifma_addr));
3087 		sp[hash >> 4] |= htole32(1 << (hash & 0xF));
3088 	}
3089 	/*
3090 	 * No reason to use a hash if we are going to be
3091 	 * receiving every multicast.
3092 	 */
3093 	if ((sc->tulip_flags & TULIP_ALLMULTI) == 0) {
3094 	    hash = tulip_mchash(ifp->if_broadcastaddr);
3095 	    sp[hash >> 4] |= htole32(1 << (hash & 0xF));
3096 	    if (sc->tulip_flags & TULIP_WANTHASHONLY) {
3097 		hash = tulip_mchash((caddr_t)eaddr);
3098 		sp[hash >> 4] |= htole32(1 << (hash & 0xF));
3099 	    } else {
3100 		sp[39] = TULIP_SP_MAC(eaddr[0]);
3101 		sp[40] = TULIP_SP_MAC(eaddr[1]);
3102 		sp[41] = TULIP_SP_MAC(eaddr[2]);
3103 	    }
3104 	}
3105     }
3106     if ((sc->tulip_flags & (TULIP_WANTHASHPERFECT|TULIP_WANTHASHONLY)) == 0) {
3107 	u_int32_t *sp = sc->tulip_setupdata;
3108 	int idx = 0;
3109 	if ((sc->tulip_flags & TULIP_ALLMULTI) == 0) {
3110 	    /*
3111 	     * Else can get perfect filtering for 16 addresses.
3112 	     */
3113 	    TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
3114 		    if (ifma->ifma_addr->sa_family != AF_LINK)
3115 			    continue;
3116 		    addrp = LLADDR((struct sockaddr_dl *)ifma->ifma_addr);
3117 		    *sp++ = TULIP_SP_MAC(((u_int16_t *)addrp)[0]);
3118 		    *sp++ = TULIP_SP_MAC(((u_int16_t *)addrp)[1]);
3119 		    *sp++ = TULIP_SP_MAC(((u_int16_t *)addrp)[2]);
3120 		    idx++;
3121 	    }
3122 	    /*
3123 	     * Add the broadcast address.
3124 	     */
3125 	    idx++;
3126 	    *sp++ = TULIP_SP_MAC(0xFFFF);
3127 	    *sp++ = TULIP_SP_MAC(0xFFFF);
3128 	    *sp++ = TULIP_SP_MAC(0xFFFF);
3129 	}
3130 	/*
3131 	 * Pad the rest with our hardware address
3132 	 */
3133 	for (; idx < 16; idx++) {
3134 	    *sp++ = TULIP_SP_MAC(eaddr[0]);
3135 	    *sp++ = TULIP_SP_MAC(eaddr[1]);
3136 	    *sp++ = TULIP_SP_MAC(eaddr[2]);
3137 	}
3138     }
3139     if_maddr_runlock(ifp);
3140 }
3141 
3142 static void
tulip_reset(tulip_softc_t * const sc)3143 tulip_reset(tulip_softc_t * const sc)
3144 {
3145     tulip_ringinfo_t *ri;
3146     tulip_descinfo_t *di;
3147     struct mbuf *m;
3148     u_int32_t inreset = (sc->tulip_flags & TULIP_INRESET);
3149 
3150     TULIP_LOCK_ASSERT(sc);
3151 
3152     CTR1(KTR_TULIP, "tulip_reset: inreset %d", inreset);
3153 
3154     /*
3155      * Brilliant.  Simply brilliant.  When switching modes/speeds
3156      * on a 2114*, you need to set the appriopriate MII/PCS/SCL/PS
3157      * bits in CSR6 and then do a software reset to get the 21140
3158      * to properly reset its internal pathways to the right places.
3159      *   Grrrr.
3160      */
3161     if ((sc->tulip_flags & TULIP_DEVICEPROBE) == 0
3162 	    && sc->tulip_boardsw->bd_media_preset != NULL)
3163 	(*sc->tulip_boardsw->bd_media_preset)(sc);
3164 
3165     TULIP_CSR_WRITE(sc, csr_busmode, TULIP_BUSMODE_SWRESET);
3166     DELAY(10);	/* Wait 10 microseconds (actually 50 PCI cycles but at
3167 		   33MHz that comes to two microseconds but wait a
3168 		   bit longer anyways) */
3169 
3170     if (!inreset) {
3171 	sc->tulip_flags |= TULIP_INRESET;
3172 	sc->tulip_flags &= ~(TULIP_NEEDRESET|TULIP_RXBUFSLOW);
3173 	sc->tulip_ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
3174     }
3175 
3176     TULIP_CSR_WRITE(sc, csr_txlist, sc->tulip_txinfo.ri_dma_addr & 0xffffffff);
3177     TULIP_CSR_WRITE(sc, csr_rxlist, sc->tulip_rxinfo.ri_dma_addr & 0xffffffff);
3178     TULIP_CSR_WRITE(sc, csr_busmode,
3179 		    (1 << (3 /*pci_max_burst_len*/ + 8))
3180 		    |TULIP_BUSMODE_CACHE_ALIGN8
3181 		    |TULIP_BUSMODE_READMULTIPLE
3182 		    |(BYTE_ORDER != LITTLE_ENDIAN ?
3183 		      TULIP_BUSMODE_DESC_BIGENDIAN : 0));
3184 
3185     sc->tulip_txtimer = 0;
3186     /*
3187      * Free all the mbufs that were on the transmit ring.
3188      */
3189     CTR0(KTR_TULIP, "tulip_reset: drain transmit ring");
3190     ri = &sc->tulip_txinfo;
3191     for (di = ri->ri_first; di < ri->ri_last; di++) {
3192 	m = tulip_dequeue_mbuf(ri, di, SYNC_NONE);
3193 	if (m != NULL)
3194 	    m_freem(m);
3195 	di->di_desc->d_status = 0;
3196     }
3197 
3198     ri->ri_nextin = ri->ri_nextout = ri->ri_first;
3199     ri->ri_free = ri->ri_max;
3200     TULIP_TXDESC_PRESYNC(ri);
3201 
3202     /*
3203      * We need to collect all the mbufs that were on the
3204      * receive ring before we reinit it either to put
3205      * them back on or to know if we have to allocate
3206      * more.
3207      */
3208     CTR0(KTR_TULIP, "tulip_reset: drain receive ring");
3209     ri = &sc->tulip_rxinfo;
3210     ri->ri_nextin = ri->ri_nextout = ri->ri_first;
3211     ri->ri_free = ri->ri_max;
3212     for (di = ri->ri_first; di < ri->ri_last; di++) {
3213 	di->di_desc->d_status = 0;
3214 	di->di_desc->d_length1 = 0; di->di_desc->d_addr1 = 0;
3215 	di->di_desc->d_length2 = 0; di->di_desc->d_addr2 = 0;
3216     }
3217     TULIP_RXDESC_PRESYNC(ri);
3218     for (di = ri->ri_first; di < ri->ri_last; di++) {
3219 	m = tulip_dequeue_mbuf(ri, di, SYNC_NONE);
3220 	if (m != NULL)
3221 	    m_freem(m);
3222     }
3223 
3224     /*
3225      * If tulip_reset is being called recursively, exit quickly knowing
3226      * that when the outer tulip_reset returns all the right stuff will
3227      * have happened.
3228      */
3229     if (inreset)
3230 	return;
3231 
3232     sc->tulip_intrmask |= TULIP_STS_NORMALINTR|TULIP_STS_RXINTR|TULIP_STS_TXINTR
3233 	|TULIP_STS_ABNRMLINTR|TULIP_STS_SYSERROR|TULIP_STS_TXSTOPPED
3234 	|TULIP_STS_TXUNDERFLOW|TULIP_STS_TXBABBLE
3235 	|TULIP_STS_RXSTOPPED;
3236 
3237     if ((sc->tulip_flags & TULIP_DEVICEPROBE) == 0)
3238 	(*sc->tulip_boardsw->bd_media_select)(sc);
3239 #if defined(TULIP_DEBUG)
3240     if ((sc->tulip_flags & TULIP_NEEDRESET) == TULIP_NEEDRESET)
3241 	device_printf(sc->tulip_dev,
3242 	    "tulip_reset: additional reset needed?!?\n");
3243 #endif
3244     if (bootverbose)
3245 	    tulip_media_print(sc);
3246     if (sc->tulip_features & TULIP_HAVE_DUALSENSE)
3247 	TULIP_CSR_WRITE(sc, csr_sia_status, TULIP_CSR_READ(sc, csr_sia_status));
3248 
3249     sc->tulip_flags &= ~(TULIP_DOINGSETUP|TULIP_WANTSETUP|TULIP_INRESET
3250 			 |TULIP_RXACT);
3251 }
3252 
3253 
3254 static void
tulip_init(void * arg)3255 tulip_init(void *arg)
3256 {
3257     tulip_softc_t *sc = (tulip_softc_t *)arg;
3258 
3259     TULIP_LOCK(sc);
3260     tulip_init_locked(sc);
3261     TULIP_UNLOCK(sc);
3262 }
3263 
3264 static void
tulip_init_locked(tulip_softc_t * const sc)3265 tulip_init_locked(tulip_softc_t * const sc)
3266 {
3267     CTR0(KTR_TULIP, "tulip_init_locked");
3268     if (sc->tulip_ifp->if_flags & IFF_UP) {
3269 	if ((sc->tulip_ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) {
3270 	    /* initialize the media */
3271 	    CTR0(KTR_TULIP, "tulip_init_locked: up but not running, reset chip");
3272 	    tulip_reset(sc);
3273 	}
3274 	tulip_addr_filter(sc);
3275 	sc->tulip_ifp->if_drv_flags |= IFF_DRV_RUNNING;
3276 	if (sc->tulip_ifp->if_flags & IFF_PROMISC) {
3277 	    sc->tulip_flags |= TULIP_PROMISC;
3278 	    sc->tulip_cmdmode |= TULIP_CMD_PROMISCUOUS;
3279 	    sc->tulip_intrmask |= TULIP_STS_TXINTR;
3280 	} else {
3281 	    sc->tulip_flags &= ~TULIP_PROMISC;
3282 	    sc->tulip_cmdmode &= ~TULIP_CMD_PROMISCUOUS;
3283 	    if (sc->tulip_flags & TULIP_ALLMULTI) {
3284 		sc->tulip_cmdmode |= TULIP_CMD_ALLMULTI;
3285 	    } else {
3286 		sc->tulip_cmdmode &= ~TULIP_CMD_ALLMULTI;
3287 	    }
3288 	}
3289 	sc->tulip_cmdmode |= TULIP_CMD_TXRUN;
3290 	if ((sc->tulip_flags & (TULIP_TXPROBE_ACTIVE|TULIP_WANTSETUP)) == 0) {
3291 	    tulip_rx_intr(sc);
3292 	    sc->tulip_cmdmode |= TULIP_CMD_RXRUN;
3293 	    sc->tulip_intrmask |= TULIP_STS_RXSTOPPED;
3294 	} else {
3295 	    sc->tulip_ifp->if_drv_flags |= IFF_DRV_OACTIVE;
3296 	    sc->tulip_cmdmode &= ~TULIP_CMD_RXRUN;
3297 	    sc->tulip_intrmask &= ~TULIP_STS_RXSTOPPED;
3298 	}
3299 	CTR2(KTR_TULIP, "tulip_init_locked: intr mask %08x  cmdmode %08x",
3300 	    sc->tulip_intrmask, sc->tulip_cmdmode);
3301 	TULIP_CSR_WRITE(sc, csr_intr, sc->tulip_intrmask);
3302 	TULIP_CSR_WRITE(sc, csr_command, sc->tulip_cmdmode);
3303 	CTR1(KTR_TULIP, "tulip_init_locked: status %08x\n",
3304 	    TULIP_CSR_READ(sc, csr_status));
3305 	if ((sc->tulip_flags & (TULIP_WANTSETUP|TULIP_TXPROBE_ACTIVE)) == TULIP_WANTSETUP)
3306 	    tulip_txput_setup(sc);
3307 	callout_reset(&sc->tulip_stat_timer, hz, tulip_watchdog, sc);
3308     } else {
3309 	CTR0(KTR_TULIP, "tulip_init_locked: not up, reset chip");
3310 	sc->tulip_ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
3311 	tulip_reset(sc);
3312 	tulip_addr_filter(sc);
3313 	callout_stop(&sc->tulip_stat_timer);
3314     }
3315 }
3316 
3317 #define DESC_STATUS(di)	(((volatile tulip_desc_t *)((di)->di_desc))->d_status)
3318 #define DESC_FLAG(di)	((di)->di_desc->d_flag)
3319 
3320 static void
tulip_rx_intr(tulip_softc_t * const sc)3321 tulip_rx_intr(tulip_softc_t * const sc)
3322 {
3323     TULIP_PERFSTART(rxintr)
3324     tulip_ringinfo_t * const ri = &sc->tulip_rxinfo;
3325     struct ifnet * const ifp = sc->tulip_ifp;
3326     int fillok = 1;
3327 #if defined(TULIP_DEBUG)
3328     int cnt = 0;
3329 #endif
3330 
3331     TULIP_LOCK_ASSERT(sc);
3332     CTR0(KTR_TULIP, "tulip_rx_intr: start");
3333     for (;;) {
3334 	TULIP_PERFSTART(rxget)
3335 	tulip_descinfo_t *eop = ri->ri_nextin, *dip;
3336 	int total_len = 0, last_offset = 0;
3337 	struct mbuf *ms = NULL, *me = NULL;
3338 	int accept = 0;
3339 	int error;
3340 
3341 	if (fillok && (ri->ri_max - ri->ri_free) < TULIP_RXQ_TARGET)
3342 	    goto queue_mbuf;
3343 
3344 #if defined(TULIP_DEBUG)
3345 	if (cnt == ri->ri_max)
3346 	    break;
3347 #endif
3348 	/*
3349 	 * If the TULIP has no descriptors, there can't be any receive
3350 	 * descriptors to process.
3351  	 */
3352 	if (eop == ri->ri_nextout)
3353 	    break;
3354 
3355 	/*
3356 	 * 90% of the packets will fit in one descriptor.  So we optimize
3357 	 * for that case.
3358 	 */
3359 	TULIP_RXDESC_POSTSYNC(ri);
3360 	if ((DESC_STATUS(eop) & (TULIP_DSTS_OWNER|TULIP_DSTS_RxFIRSTDESC|TULIP_DSTS_RxLASTDESC)) == (TULIP_DSTS_RxFIRSTDESC|TULIP_DSTS_RxLASTDESC)) {
3361 	    ms = tulip_dequeue_mbuf(ri, eop, SYNC_RX);
3362 	    CTR2(KTR_TULIP,
3363 		"tulip_rx_intr: single packet mbuf %p from descriptor %td", ms,
3364 		eop - ri->ri_first);
3365 	    me = ms;
3366 	    ri->ri_free++;
3367 	} else {
3368 	    /*
3369 	     * If still owned by the TULIP, don't touch it.
3370 	     */
3371 	    if (DESC_STATUS(eop) & TULIP_DSTS_OWNER)
3372 		break;
3373 
3374 	    /*
3375 	     * It is possible (though improbable unless MCLBYTES < 1518) for
3376 	     * a received packet to cross more than one receive descriptor.
3377 	     * We first loop through the descriptor ring making sure we have
3378 	     * received a complete packet.  If not, we bail until the next
3379 	     * interrupt.
3380 	     */
3381 	    dip = eop;
3382 	    while ((DESC_STATUS(eop) & TULIP_DSTS_RxLASTDESC) == 0) {
3383 		if (++eop == ri->ri_last)
3384 		    eop = ri->ri_first;
3385 		TULIP_RXDESC_POSTSYNC(ri);
3386 		if (eop == ri->ri_nextout || DESC_STATUS(eop) & TULIP_DSTS_OWNER) {
3387 #if defined(TULIP_DEBUG)
3388 		    sc->tulip_dbg.dbg_rxintrs++;
3389 		    sc->tulip_dbg.dbg_rxpktsperintr[cnt]++;
3390 #endif
3391 		    TULIP_PERFEND(rxget);
3392 		    TULIP_PERFEND(rxintr);
3393 		    return;
3394 		}
3395 		total_len++;
3396 	    }
3397 
3398 	    /*
3399 	     * Dequeue the first buffer for the start of the packet.  Hopefully
3400 	     * this will be the only one we need to dequeue.  However, if the
3401 	     * packet consumed multiple descriptors, then we need to dequeue
3402 	     * those buffers and chain to the starting mbuf.  All buffers but
3403 	     * the last buffer have the same length so we can set that now.
3404 	     * (we add to last_offset instead of multiplying since we normally
3405 	     * won't go into the loop and thereby saving ourselves from
3406 	     * doing a multiplication by 0 in the normal case).
3407 	     */
3408 	    ms = tulip_dequeue_mbuf(ri, dip, SYNC_RX);
3409 	    CTR2(KTR_TULIP,
3410 		"tulip_rx_intr: start packet mbuf %p from descriptor %td", ms,
3411 		dip - ri->ri_first);
3412 	    ri->ri_free++;
3413 	    for (me = ms; total_len > 0; total_len--) {
3414 		me->m_len = TULIP_RX_BUFLEN;
3415 		last_offset += TULIP_RX_BUFLEN;
3416 		if (++dip == ri->ri_last)
3417 		    dip = ri->ri_first;
3418 		me->m_next = tulip_dequeue_mbuf(ri, dip, SYNC_RX);
3419 		ri->ri_free++;
3420 		me = me->m_next;
3421 		CTR2(KTR_TULIP,
3422 		    "tulip_rx_intr: cont packet mbuf %p from descriptor %td",
3423 		    me, dip - ri->ri_first);
3424 	    }
3425 	    KASSERT(dip == eop, ("mismatched descinfo structs"));
3426 	}
3427 
3428 	/*
3429 	 *  Now get the size of received packet (minus the CRC).
3430 	 */
3431 	total_len = ((DESC_STATUS(eop) >> 16) & 0x7FFF) - ETHER_CRC_LEN;
3432 	if ((sc->tulip_flags & TULIP_RXIGNORE) == 0
3433 	    && ((DESC_STATUS(eop) & TULIP_DSTS_ERRSUM) == 0)) {
3434 	    me->m_len = total_len - last_offset;
3435 	    sc->tulip_flags |= TULIP_RXACT;
3436 	    accept = 1;
3437 	    CTR1(KTR_TULIP, "tulip_rx_intr: good packet; length %d",
3438 		total_len);
3439 	} else {
3440 	    CTR1(KTR_TULIP, "tulip_rx_intr: bad packet; status %08x",
3441 		DESC_STATUS(eop));
3442 	    if_inc_counter(ifp, IFCOUNTER_IERRORS, 1);
3443 	    if (DESC_STATUS(eop) & (TULIP_DSTS_RxBADLENGTH|TULIP_DSTS_RxOVERFLOW|TULIP_DSTS_RxWATCHDOG)) {
3444 		sc->tulip_dot3stats.dot3StatsInternalMacReceiveErrors++;
3445 	    } else {
3446 #if defined(TULIP_VERBOSE)
3447 		const char *error = NULL;
3448 #endif
3449 		if (DESC_STATUS(eop) & TULIP_DSTS_RxTOOLONG) {
3450 		    sc->tulip_dot3stats.dot3StatsFrameTooLongs++;
3451 #if defined(TULIP_VERBOSE)
3452 		    error = "frame too long";
3453 #endif
3454 		}
3455 		if (DESC_STATUS(eop) & TULIP_DSTS_RxBADCRC) {
3456 		    if (DESC_STATUS(eop) & TULIP_DSTS_RxDRBBLBIT) {
3457 			sc->tulip_dot3stats.dot3StatsAlignmentErrors++;
3458 #if defined(TULIP_VERBOSE)
3459 			error = "alignment error";
3460 #endif
3461 		    } else {
3462 			sc->tulip_dot3stats.dot3StatsFCSErrors++;
3463 #if defined(TULIP_VERBOSE)
3464 			error = "bad crc";
3465 #endif
3466 		    }
3467 		}
3468 #if defined(TULIP_VERBOSE)
3469 		if (error != NULL && (sc->tulip_flags & TULIP_NOMESSAGES) == 0) {
3470 		    device_printf(sc->tulip_dev, "receive: %6D: %s\n",
3471 			   mtod(ms, u_char *) + 6, ":",
3472 			   error);
3473 		    sc->tulip_flags |= TULIP_NOMESSAGES;
3474 		}
3475 #endif
3476 	    }
3477 
3478 	}
3479 #if defined(TULIP_DEBUG)
3480 	cnt++;
3481 #endif
3482 	if_inc_counter(ifp, IFCOUNTER_IPACKETS, 1);
3483 	if (++eop == ri->ri_last)
3484 	    eop = ri->ri_first;
3485 	ri->ri_nextin = eop;
3486       queue_mbuf:
3487 	/*
3488 	 * We have received a good packet that needs to be passed up the
3489 	 * stack.
3490 	 */
3491 	if (accept) {
3492 	    struct mbuf *m0;
3493 
3494 	    KASSERT(ms != NULL, ("no packet to accept"));
3495 #ifndef	__NO_STRICT_ALIGNMENT
3496 	    /*
3497 	     * Copy the data into a new mbuf that is properly aligned.  If
3498 	     * we fail to allocate a new mbuf, then drop the packet.  We will
3499 	     * reuse the same rx buffer ('ms') below for another packet
3500 	     * regardless.
3501 	     */
3502 	    m0 = m_devget(mtod(ms, caddr_t), total_len, ETHER_ALIGN, ifp, NULL);
3503 	    if (m0 == NULL) {
3504 		if_inc_counter(ifp, IFCOUNTER_IERRORS, 1);
3505 		goto skip_input;
3506 	    }
3507 #else
3508 	    /*
3509 	     * Update the header for the mbuf referencing this receive
3510 	     * buffer and pass it up the stack.  Allocate a new mbuf cluster
3511 	     * to replace the one we just passed up the stack.
3512 	     *
3513 	     * Note that if this packet crossed multiple descriptors
3514 	     * we don't even try to reallocate all the mbufs here.
3515 	     * Instead we rely on the test at the beginning of
3516 	     * the loop to refill for the extra consumed mbufs.
3517 	     */
3518 	    ms->m_pkthdr.len = total_len;
3519 	    ms->m_pkthdr.rcvif = ifp;
3520 	    m0 = ms;
3521 	    ms = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR);
3522 #endif
3523 	    TULIP_UNLOCK(sc);
3524 	    CTR1(KTR_TULIP, "tulip_rx_intr: passing %p to upper layer", m0);
3525 	    (*ifp->if_input)(ifp, m0);
3526 	    TULIP_LOCK(sc);
3527 	} else if (ms == NULL)
3528 	    /*
3529 	     * If we are priming the TULIP with mbufs, then allocate
3530 	     * a new cluster for the next descriptor.
3531 	     */
3532 	    ms = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR);
3533 
3534 #ifndef __NO_STRICT_ALIGNMENT
3535     skip_input:
3536 #endif
3537 	if (ms == NULL) {
3538 	    /*
3539 	     * Couldn't allocate a new buffer.  Don't bother
3540 	     * trying to replenish the receive queue.
3541 	     */
3542 	    fillok = 0;
3543 	    sc->tulip_flags |= TULIP_RXBUFSLOW;
3544 #if defined(TULIP_DEBUG)
3545 	    sc->tulip_dbg.dbg_rxlowbufs++;
3546 #endif
3547 	    TULIP_PERFEND(rxget);
3548 	    continue;
3549 	}
3550 	/*
3551 	 * Now give the buffer(s) to the TULIP and save in our
3552 	 * receive queue.
3553 	 */
3554 	do {
3555 	    tulip_descinfo_t * const nextout = ri->ri_nextout;
3556 
3557 	    M_ASSERTPKTHDR(ms);
3558 	    KASSERT(ms->m_data == ms->m_ext.ext_buf,
3559 		("rx mbuf data doesn't point to cluster"));
3560 	    ms->m_len = ms->m_pkthdr.len = TULIP_RX_BUFLEN;
3561 	    error = bus_dmamap_load_mbuf(ri->ri_data_tag, *nextout->di_map, ms,
3562 		tulip_dma_map_rxbuf, nextout->di_desc, BUS_DMA_NOWAIT);
3563 	    if (error) {
3564 		device_printf(sc->tulip_dev,
3565 		    "unable to load rx map, error = %d\n", error);
3566 		panic("tulip_rx_intr");		/* XXX */
3567 	    }
3568 	    nextout->di_desc->d_status = TULIP_DSTS_OWNER;
3569 	    KASSERT(nextout->di_mbuf == NULL, ("clobbering earlier rx mbuf"));
3570 	    nextout->di_mbuf = ms;
3571 	    CTR2(KTR_TULIP, "tulip_rx_intr: enqueued mbuf %p to descriptor %td",
3572 		ms, nextout - ri->ri_first);
3573 	    TULIP_RXDESC_POSTSYNC(ri);
3574 	    if (++ri->ri_nextout == ri->ri_last)
3575 		ri->ri_nextout = ri->ri_first;
3576 	    ri->ri_free--;
3577 	    me = ms->m_next;
3578 	    ms->m_next = NULL;
3579 	} while ((ms = me) != NULL);
3580 
3581 	if ((ri->ri_max - ri->ri_free) >= TULIP_RXQ_TARGET)
3582 	    sc->tulip_flags &= ~TULIP_RXBUFSLOW;
3583 	TULIP_PERFEND(rxget);
3584     }
3585 
3586 #if defined(TULIP_DEBUG)
3587     sc->tulip_dbg.dbg_rxintrs++;
3588     sc->tulip_dbg.dbg_rxpktsperintr[cnt]++;
3589 #endif
3590     TULIP_PERFEND(rxintr);
3591 }
3592 
3593 static int
tulip_tx_intr(tulip_softc_t * const sc)3594 tulip_tx_intr(tulip_softc_t * const sc)
3595 {
3596     TULIP_PERFSTART(txintr)
3597     tulip_ringinfo_t * const ri = &sc->tulip_txinfo;
3598     struct mbuf *m;
3599     int xmits = 0;
3600     int descs = 0;
3601 
3602     CTR0(KTR_TULIP, "tulip_tx_intr: start");
3603     TULIP_LOCK_ASSERT(sc);
3604     while (ri->ri_free < ri->ri_max) {
3605 	u_int32_t d_flag;
3606 
3607 	TULIP_TXDESC_POSTSYNC(ri);
3608 	if (DESC_STATUS(ri->ri_nextin) & TULIP_DSTS_OWNER)
3609 	    break;
3610 
3611 	ri->ri_free++;
3612 	descs++;
3613 	d_flag = DESC_FLAG(ri->ri_nextin);
3614 	if (d_flag & TULIP_DFLAG_TxLASTSEG) {
3615 	    if (d_flag & TULIP_DFLAG_TxSETUPPKT) {
3616 		CTR2(KTR_TULIP,
3617 		    "tulip_tx_intr: setup packet from descriptor %td: %08x",
3618 		    ri->ri_nextin - ri->ri_first, DESC_STATUS(ri->ri_nextin));
3619 		/*
3620 		 * We've just finished processing a setup packet.
3621 		 * Mark that we finished it.  If there's not
3622 		 * another pending, startup the TULIP receiver.
3623 		 * Make sure we ack the RXSTOPPED so we won't get
3624 		 * an abormal interrupt indication.
3625 		 */
3626 		bus_dmamap_sync(sc->tulip_setup_tag, sc->tulip_setup_map,
3627 		    BUS_DMASYNC_POSTWRITE);
3628 		sc->tulip_flags &= ~(TULIP_DOINGSETUP|TULIP_HASHONLY);
3629 		if (DESC_FLAG(ri->ri_nextin) & TULIP_DFLAG_TxINVRSFILT)
3630 		    sc->tulip_flags |= TULIP_HASHONLY;
3631 		if ((sc->tulip_flags & (TULIP_WANTSETUP|TULIP_TXPROBE_ACTIVE)) == 0) {
3632 		    tulip_rx_intr(sc);
3633 		    sc->tulip_cmdmode |= TULIP_CMD_RXRUN;
3634 		    sc->tulip_intrmask |= TULIP_STS_RXSTOPPED;
3635 		    CTR2(KTR_TULIP,
3636 			"tulip_tx_intr: intr mask %08x  cmdmode %08x",
3637 			sc->tulip_intrmask, sc->tulip_cmdmode);
3638 		    TULIP_CSR_WRITE(sc, csr_status, TULIP_STS_RXSTOPPED);
3639 		    TULIP_CSR_WRITE(sc, csr_intr, sc->tulip_intrmask);
3640 		    TULIP_CSR_WRITE(sc, csr_command, sc->tulip_cmdmode);
3641 		}
3642 	    } else {
3643 		const u_int32_t d_status = DESC_STATUS(ri->ri_nextin);
3644 
3645 		m = tulip_dequeue_mbuf(ri, ri->ri_nextin, SYNC_TX);
3646 		CTR2(KTR_TULIP,
3647 		    "tulip_tx_intr: data packet %p from descriptor %td", m,
3648 		    ri->ri_nextin - ri->ri_first);
3649 		if (m != NULL) {
3650 		    m_freem(m);
3651 #if defined(TULIP_DEBUG)
3652 		} else {
3653 		    device_printf(sc->tulip_dev,
3654 		        "tx_intr: failed to dequeue mbuf?!?\n");
3655 #endif
3656 		}
3657 		if (sc->tulip_flags & TULIP_TXPROBE_ACTIVE) {
3658 		    tulip_mediapoll_event_t event = TULIP_MEDIAPOLL_TXPROBE_OK;
3659 		    if (d_status & (TULIP_DSTS_TxNOCARR|TULIP_DSTS_TxEXCCOLL)) {
3660 #if defined(TULIP_DEBUG)
3661 			if (d_status & TULIP_DSTS_TxNOCARR)
3662 			    sc->tulip_dbg.dbg_txprobe_nocarr++;
3663 			if (d_status & TULIP_DSTS_TxEXCCOLL)
3664 			    sc->tulip_dbg.dbg_txprobe_exccoll++;
3665 #endif
3666 			event = TULIP_MEDIAPOLL_TXPROBE_FAILED;
3667 		    }
3668 		    (*sc->tulip_boardsw->bd_media_poll)(sc, event);
3669 		    /*
3670 		     * Escape from the loop before media poll has reset the TULIP!
3671 		     */
3672 		    break;
3673 		} else {
3674 		    xmits++;
3675 		    if (d_status & TULIP_DSTS_ERRSUM) {
3676 			CTR1(KTR_TULIP, "tulip_tx_intr: output error: %08x",
3677 			    d_status);
3678 			if_inc_counter(sc->tulip_ifp, IFCOUNTER_OERRORS, 1);
3679 			if (d_status & TULIP_DSTS_TxEXCCOLL)
3680 			    sc->tulip_dot3stats.dot3StatsExcessiveCollisions++;
3681 			if (d_status & TULIP_DSTS_TxLATECOLL)
3682 			    sc->tulip_dot3stats.dot3StatsLateCollisions++;
3683 			if (d_status & (TULIP_DSTS_TxNOCARR|TULIP_DSTS_TxCARRLOSS))
3684 			    sc->tulip_dot3stats.dot3StatsCarrierSenseErrors++;
3685 			if (d_status & (TULIP_DSTS_TxUNDERFLOW|TULIP_DSTS_TxBABBLE))
3686 			    sc->tulip_dot3stats.dot3StatsInternalMacTransmitErrors++;
3687 			if (d_status & TULIP_DSTS_TxUNDERFLOW)
3688 			    sc->tulip_dot3stats.dot3StatsInternalTransmitUnderflows++;
3689 			if (d_status & TULIP_DSTS_TxBABBLE)
3690 			    sc->tulip_dot3stats.dot3StatsInternalTransmitBabbles++;
3691 		    } else {
3692 			u_int32_t collisions =
3693 			    (d_status & TULIP_DSTS_TxCOLLMASK)
3694 				>> TULIP_DSTS_V_TxCOLLCNT;
3695 
3696 			CTR2(KTR_TULIP,
3697 		    "tulip_tx_intr: output ok, collisions %d, status %08x",
3698 			    collisions, d_status);
3699 			if_inc_counter(sc->tulip_ifp, IFCOUNTER_COLLISIONS, collisions);
3700 			if (collisions == 1)
3701 			    sc->tulip_dot3stats.dot3StatsSingleCollisionFrames++;
3702 			else if (collisions > 1)
3703 			    sc->tulip_dot3stats.dot3StatsMultipleCollisionFrames++;
3704 			else if (d_status & TULIP_DSTS_TxDEFERRED)
3705 			    sc->tulip_dot3stats.dot3StatsDeferredTransmissions++;
3706 			/*
3707 			 * SQE is only valid for 10baseT/BNC/AUI when not
3708 			 * running in full-duplex.  In order to speed up the
3709 			 * test, the corresponding bit in tulip_flags needs to
3710 			 * set as well to get us to count SQE Test Errors.
3711 			 */
3712 			if (d_status & TULIP_DSTS_TxNOHRTBT & sc->tulip_flags)
3713 			    sc->tulip_dot3stats.dot3StatsSQETestErrors++;
3714 		    }
3715 		}
3716 	    }
3717 	}
3718 
3719 	if (++ri->ri_nextin == ri->ri_last)
3720 	    ri->ri_nextin = ri->ri_first;
3721 
3722 	if ((sc->tulip_flags & TULIP_TXPROBE_ACTIVE) == 0)
3723 	    sc->tulip_ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
3724     }
3725     /*
3726      * If nothing left to transmit, disable the timer.
3727      * Else if progress, reset the timer back to 2 ticks.
3728      */
3729     if (ri->ri_free == ri->ri_max || (sc->tulip_flags & TULIP_TXPROBE_ACTIVE))
3730 	sc->tulip_txtimer = 0;
3731     else if (xmits > 0)
3732 	sc->tulip_txtimer = TULIP_TXTIMER;
3733     if_inc_counter(sc->tulip_ifp, IFCOUNTER_OPACKETS, xmits);
3734     TULIP_PERFEND(txintr);
3735     return descs;
3736 }
3737 
3738 static void
tulip_print_abnormal_interrupt(tulip_softc_t * const sc,u_int32_t csr)3739 tulip_print_abnormal_interrupt(tulip_softc_t * const sc, u_int32_t csr)
3740 {
3741     const char * const *msgp = tulip_status_bits;
3742     const char *sep;
3743     u_int32_t mask;
3744     const char thrsh[] = "72|128\0\0\0" "96|256\0\0\0" "128|512\0\0" "160|1024";
3745 
3746     TULIP_LOCK_ASSERT(sc);
3747     csr &= (1 << (sizeof(tulip_status_bits)/sizeof(tulip_status_bits[0]))) - 1;
3748     device_printf(sc->tulip_dev, "abnormal interrupt:");
3749     for (sep = " ", mask = 1; mask <= csr; mask <<= 1, msgp++) {
3750 	if ((csr & mask) && *msgp != NULL) {
3751 	    printf("%s%s", sep, *msgp);
3752 	    if (mask == TULIP_STS_TXUNDERFLOW && (sc->tulip_flags & TULIP_NEWTXTHRESH)) {
3753 		sc->tulip_flags &= ~TULIP_NEWTXTHRESH;
3754 		if (sc->tulip_cmdmode & TULIP_CMD_STOREFWD) {
3755 		    printf(" (switching to store-and-forward mode)");
3756 		} else {
3757 		    printf(" (raising TX threshold to %s)",
3758 			   &thrsh[9 * ((sc->tulip_cmdmode & TULIP_CMD_THRESHOLDCTL) >> 14)]);
3759 		}
3760 	    }
3761 	    sep = ", ";
3762 	}
3763     }
3764     printf("\n");
3765 }
3766 
3767 static void
tulip_intr_handler(tulip_softc_t * const sc)3768 tulip_intr_handler(tulip_softc_t * const sc)
3769 {
3770     TULIP_PERFSTART(intr)
3771     u_int32_t csr;
3772 
3773     CTR0(KTR_TULIP, "tulip_intr_handler invoked");
3774     TULIP_LOCK_ASSERT(sc);
3775     while ((csr = TULIP_CSR_READ(sc, csr_status)) & sc->tulip_intrmask) {
3776 	TULIP_CSR_WRITE(sc, csr_status, csr);
3777 
3778 	if (csr & TULIP_STS_SYSERROR) {
3779 	    sc->tulip_last_system_error = (csr & TULIP_STS_ERRORMASK) >> TULIP_STS_ERR_SHIFT;
3780 	    if (sc->tulip_flags & TULIP_NOMESSAGES) {
3781 		sc->tulip_flags |= TULIP_SYSTEMERROR;
3782 	    } else {
3783 		device_printf(sc->tulip_dev, "system error: %s\n",
3784 		       tulip_system_errors[sc->tulip_last_system_error]);
3785 	    }
3786 	    sc->tulip_flags |= TULIP_NEEDRESET;
3787 	    sc->tulip_system_errors++;
3788 	    break;
3789 	}
3790 	if (csr & (TULIP_STS_LINKPASS|TULIP_STS_LINKFAIL) & sc->tulip_intrmask) {
3791 #if defined(TULIP_DEBUG)
3792 	    sc->tulip_dbg.dbg_link_intrs++;
3793 #endif
3794 	    if (sc->tulip_boardsw->bd_media_poll != NULL) {
3795 		(*sc->tulip_boardsw->bd_media_poll)(sc, csr & TULIP_STS_LINKFAIL
3796 						    ? TULIP_MEDIAPOLL_LINKFAIL
3797 						    : TULIP_MEDIAPOLL_LINKPASS);
3798 		csr &= ~TULIP_STS_ABNRMLINTR;
3799 	    }
3800 	    tulip_media_print(sc);
3801 	}
3802 	if (csr & (TULIP_STS_RXINTR|TULIP_STS_RXNOBUF)) {
3803 	    u_int32_t misses = TULIP_CSR_READ(sc, csr_missed_frames);
3804 	    if (csr & TULIP_STS_RXNOBUF)
3805 		sc->tulip_dot3stats.dot3StatsMissedFrames += misses & 0xFFFF;
3806 	    /*
3807 	     * Pass 2.[012] of the 21140A-A[CDE] may hang and/or corrupt data
3808 	     * on receive overflows.
3809 	     */
3810 	    if ((misses & 0x0FFE0000) && (sc->tulip_features & TULIP_HAVE_RXBADOVRFLW)) {
3811 		sc->tulip_dot3stats.dot3StatsInternalMacReceiveErrors++;
3812 		/*
3813 		 * Stop the receiver process and spin until it's stopped.
3814 		 * Tell rx_intr to drop the packets it dequeues.
3815 		 */
3816 		TULIP_CSR_WRITE(sc, csr_command, sc->tulip_cmdmode & ~TULIP_CMD_RXRUN);
3817 		while ((TULIP_CSR_READ(sc, csr_status) & TULIP_STS_RXSTOPPED) == 0)
3818 		    ;
3819 		TULIP_CSR_WRITE(sc, csr_status, TULIP_STS_RXSTOPPED);
3820 		sc->tulip_flags |= TULIP_RXIGNORE;
3821 	    }
3822 	    tulip_rx_intr(sc);
3823 	    if (sc->tulip_flags & TULIP_RXIGNORE) {
3824 		/*
3825 		 * Restart the receiver.
3826 		 */
3827 		sc->tulip_flags &= ~TULIP_RXIGNORE;
3828 		TULIP_CSR_WRITE(sc, csr_command, sc->tulip_cmdmode);
3829 	    }
3830 	}
3831 	if (csr & TULIP_STS_ABNRMLINTR) {
3832 	    u_int32_t tmp = csr & sc->tulip_intrmask
3833 		& ~(TULIP_STS_NORMALINTR|TULIP_STS_ABNRMLINTR);
3834 	    if (csr & TULIP_STS_TXUNDERFLOW) {
3835 		if ((sc->tulip_cmdmode & TULIP_CMD_THRESHOLDCTL) != TULIP_CMD_THRSHLD160) {
3836 		    sc->tulip_cmdmode += TULIP_CMD_THRSHLD96;
3837 		    sc->tulip_flags |= TULIP_NEWTXTHRESH;
3838 		} else if (sc->tulip_features & TULIP_HAVE_STOREFWD) {
3839 		    sc->tulip_cmdmode |= TULIP_CMD_STOREFWD;
3840 		    sc->tulip_flags |= TULIP_NEWTXTHRESH;
3841 		}
3842 	    }
3843 	    if (sc->tulip_flags & TULIP_NOMESSAGES) {
3844 		sc->tulip_statusbits |= tmp;
3845 	    } else {
3846 		tulip_print_abnormal_interrupt(sc, tmp);
3847 		sc->tulip_flags |= TULIP_NOMESSAGES;
3848 	    }
3849 	    TULIP_CSR_WRITE(sc, csr_command, sc->tulip_cmdmode);
3850 	}
3851 	if (sc->tulip_flags & (TULIP_WANTTXSTART|TULIP_TXPROBE_ACTIVE|TULIP_DOINGSETUP|TULIP_PROMISC)) {
3852 	    tulip_tx_intr(sc);
3853 	    if ((sc->tulip_flags & TULIP_TXPROBE_ACTIVE) == 0)
3854 		tulip_start_locked(sc);
3855 	}
3856     }
3857     if (sc->tulip_flags & TULIP_NEEDRESET) {
3858 	tulip_reset(sc);
3859 	tulip_init_locked(sc);
3860     }
3861     TULIP_PERFEND(intr);
3862 }
3863 
3864 static void
tulip_intr_shared(void * arg)3865 tulip_intr_shared(void *arg)
3866 {
3867     tulip_softc_t * sc = arg;
3868 
3869     for (; sc != NULL; sc = sc->tulip_slaves) {
3870 	TULIP_LOCK(sc);
3871 #if defined(TULIP_DEBUG)
3872 	sc->tulip_dbg.dbg_intrs++;
3873 #endif
3874 	tulip_intr_handler(sc);
3875 	TULIP_UNLOCK(sc);
3876     }
3877 }
3878 
3879 static void
tulip_intr_normal(void * arg)3880 tulip_intr_normal(void *arg)
3881 {
3882     tulip_softc_t * sc = (tulip_softc_t *) arg;
3883 
3884     TULIP_LOCK(sc);
3885 #if defined(TULIP_DEBUG)
3886     sc->tulip_dbg.dbg_intrs++;
3887 #endif
3888     tulip_intr_handler(sc);
3889     TULIP_UNLOCK(sc);
3890 }
3891 
3892 static struct mbuf *
tulip_txput(tulip_softc_t * const sc,struct mbuf * m)3893 tulip_txput(tulip_softc_t * const sc, struct mbuf *m)
3894 {
3895     TULIP_PERFSTART(txput)
3896     tulip_ringinfo_t * const ri = &sc->tulip_txinfo;
3897     tulip_descinfo_t *eop, *nextout;
3898     int segcnt, free;
3899     u_int32_t d_status;
3900     bus_dma_segment_t segs[TULIP_MAX_TXSEG];
3901     bus_dmamap_t *map;
3902     int error, nsegs;
3903     struct mbuf *m0;
3904 
3905     TULIP_LOCK_ASSERT(sc);
3906 #if defined(TULIP_DEBUG)
3907     if ((sc->tulip_cmdmode & TULIP_CMD_TXRUN) == 0) {
3908 	device_printf(sc->tulip_dev, "txput%s: tx not running\n",
3909 	       (sc->tulip_flags & TULIP_TXPROBE_ACTIVE) ? "(probe)" : "");
3910 	sc->tulip_flags |= TULIP_WANTTXSTART;
3911 	sc->tulip_dbg.dbg_txput_finishes[0]++;
3912 	goto finish;
3913     }
3914 #endif
3915 
3916     /*
3917      * Now we try to fill in our transmit descriptors.  This is
3918      * a bit reminiscent of going on the Ark two by two
3919      * since each descriptor for the TULIP can describe
3920      * two buffers.  So we advance through packet filling
3921      * each of the two entries at a time to fill each
3922      * descriptor.  Clear the first and last segment bits
3923      * in each descriptor (actually just clear everything
3924      * but the end-of-ring or chain bits) to make sure
3925      * we don't get messed up by previously sent packets.
3926      *
3927      * We may fail to put the entire packet on the ring if
3928      * there is either not enough ring entries free or if the
3929      * packet has more than MAX_TXSEG segments.  In the former
3930      * case we will just wait for the ring to empty.  In the
3931      * latter case we have to recopy.
3932      */
3933 #if defined(KTR) && KTR_TULIP
3934     segcnt = 1;
3935     m0 = m;
3936     while (m0->m_next != NULL) {
3937 	    segcnt++;
3938 	    m0 = m0->m_next;
3939     }
3940     CTR2(KTR_TULIP, "tulip_txput: sending packet %p (%d chunks)", m, segcnt);
3941 #endif
3942     d_status = 0;
3943     eop = nextout = ri->ri_nextout;
3944     segcnt = 0;
3945     free = ri->ri_free;
3946 
3947     /*
3948      * Reclaim some tx descriptors if we are out since we need at least one
3949      * free descriptor so that we have a dma_map to load the mbuf.
3950      */
3951     if (free == 0) {
3952 #if defined(TULIP_DEBUG)
3953 	sc->tulip_dbg.dbg_no_txmaps++;
3954 #endif
3955 	free += tulip_tx_intr(sc);
3956     }
3957     if (free == 0) {
3958 	sc->tulip_flags |= TULIP_WANTTXSTART;
3959 #if defined(TULIP_DEBUG)
3960 	sc->tulip_dbg.dbg_txput_finishes[1]++;
3961 #endif
3962 	goto finish;
3963     }
3964     error = bus_dmamap_load_mbuf_sg(ri->ri_data_tag, *eop->di_map, m, segs,
3965 	&nsegs, BUS_DMA_NOWAIT);
3966     if (error != 0) {
3967 	if (error == EFBIG) {
3968 	    /*
3969 	     * The packet exceeds the number of transmit buffer
3970 	     * entries that we can use for one packet, so we have
3971 	     * to recopy it into one mbuf and then try again.  If
3972 	     * we can't recopy it, try again later.
3973 	     */
3974 	    m0 = m_defrag(m, M_NOWAIT);
3975 	    if (m0 == NULL) {
3976 		sc->tulip_flags |= TULIP_WANTTXSTART;
3977 #if defined(TULIP_DEBUG)
3978 		sc->tulip_dbg.dbg_txput_finishes[2]++;
3979 #endif
3980 		goto finish;
3981 	    }
3982 	    m = m0;
3983 	    error = bus_dmamap_load_mbuf_sg(ri->ri_data_tag, *eop->di_map, m,
3984 		segs, &nsegs, BUS_DMA_NOWAIT);
3985 	}
3986 	if (error != 0) {
3987 	    device_printf(sc->tulip_dev,
3988 	        "unable to load tx map, error = %d\n", error);
3989 #if defined(TULIP_DEBUG)
3990 	    sc->tulip_dbg.dbg_txput_finishes[3]++;
3991 #endif
3992 	    goto finish;
3993 	}
3994     }
3995     CTR1(KTR_TULIP, "tulip_txput: nsegs %d", nsegs);
3996 
3997     /*
3998      * Each descriptor allows for up to 2 fragments since we don't use
3999      * the descriptor chaining mode in this driver.
4000      */
4001     if ((free -= (nsegs + 1) / 2) <= 0
4002 	    /*
4003 	     * See if there's any unclaimed space in the transmit ring.
4004 	     */
4005 	    && (free += tulip_tx_intr(sc)) <= 0) {
4006 	/*
4007 	 * There's no more room but since nothing
4008 	 * has been committed at this point, just
4009 	 * show output is active, put back the
4010 	 * mbuf and return.
4011 	 */
4012 	sc->tulip_flags |= TULIP_WANTTXSTART;
4013 #if defined(TULIP_DEBUG)
4014 	sc->tulip_dbg.dbg_txput_finishes[4]++;
4015 #endif
4016 	bus_dmamap_unload(ri->ri_data_tag, *eop->di_map);
4017 	goto finish;
4018     }
4019     for (; nsegs - segcnt > 1; segcnt += 2) {
4020 	eop = nextout;
4021 	eop->di_desc->d_flag   &= TULIP_DFLAG_ENDRING|TULIP_DFLAG_CHAIN;
4022 	eop->di_desc->d_status  = d_status;
4023 	eop->di_desc->d_addr1   = segs[segcnt].ds_addr & 0xffffffff;
4024 	eop->di_desc->d_length1 = segs[segcnt].ds_len;
4025 	eop->di_desc->d_addr2   = segs[segcnt+1].ds_addr & 0xffffffff;
4026 	eop->di_desc->d_length2 = segs[segcnt+1].ds_len;
4027 	d_status = TULIP_DSTS_OWNER;
4028 	if (++nextout == ri->ri_last)
4029 	    nextout = ri->ri_first;
4030     }
4031     if (segcnt < nsegs) {
4032 	eop = nextout;
4033 	eop->di_desc->d_flag   &= TULIP_DFLAG_ENDRING|TULIP_DFLAG_CHAIN;
4034 	eop->di_desc->d_status  = d_status;
4035 	eop->di_desc->d_addr1   = segs[segcnt].ds_addr & 0xffffffff;
4036 	eop->di_desc->d_length1 = segs[segcnt].ds_len;
4037 	eop->di_desc->d_addr2   = 0;
4038 	eop->di_desc->d_length2 = 0;
4039 	if (++nextout == ri->ri_last)
4040 	    nextout = ri->ri_first;
4041     }
4042 
4043     /*
4044      * tulip_tx_intr() harvests the mbuf from the last descriptor in the
4045      * frame.  We just used the dmamap in the first descriptor for the
4046      * load operation however.  Thus, to let the tulip_dequeue_mbuf() call
4047      * in tulip_tx_intr() unload the correct dmamap, we swap the dmamap
4048      * pointers in the two descriptors if this is a multiple-descriptor
4049      * packet.
4050      */
4051     if (eop != ri->ri_nextout) {
4052 	    map = eop->di_map;
4053 	    eop->di_map = ri->ri_nextout->di_map;
4054 	    ri->ri_nextout->di_map = map;
4055     }
4056 
4057     /*
4058      * bounce a copy to the bpf listener, if any.
4059      */
4060     if (!(sc->tulip_flags & TULIP_DEVICEPROBE))
4061 	    BPF_MTAP(sc->tulip_ifp, m);
4062 
4063     /*
4064      * The descriptors have been filled in.  Now get ready
4065      * to transmit.
4066      */
4067     CTR3(KTR_TULIP, "tulip_txput: enqueued mbuf %p to descriptors %td - %td",
4068 	m, ri->ri_nextout - ri->ri_first, eop - ri->ri_first);
4069     KASSERT(eop->di_mbuf == NULL, ("clobbering earlier tx mbuf"));
4070     eop->di_mbuf = m;
4071     TULIP_TXMAP_PRESYNC(ri, ri->ri_nextout);
4072     m = NULL;
4073 
4074     /*
4075      * Make sure the next descriptor after this packet is owned
4076      * by us since it may have been set up above if we ran out
4077      * of room in the ring.
4078      */
4079     nextout->di_desc->d_status = 0;
4080     TULIP_TXDESC_PRESYNC(ri);
4081 
4082     /*
4083      * Mark the last and first segments, indicate we want a transmit
4084      * complete interrupt, and tell it to transmit!
4085      */
4086     eop->di_desc->d_flag |= TULIP_DFLAG_TxLASTSEG|TULIP_DFLAG_TxWANTINTR;
4087 
4088     /*
4089      * Note that ri->ri_nextout is still the start of the packet
4090      * and until we set the OWNER bit, we can still back out of
4091      * everything we have done.
4092      */
4093     ri->ri_nextout->di_desc->d_flag |= TULIP_DFLAG_TxFIRSTSEG;
4094     TULIP_TXDESC_PRESYNC(ri);
4095     ri->ri_nextout->di_desc->d_status = TULIP_DSTS_OWNER;
4096     TULIP_TXDESC_PRESYNC(ri);
4097 
4098     /*
4099      * This advances the ring for us.
4100      */
4101     ri->ri_nextout = nextout;
4102     ri->ri_free = free;
4103 
4104     TULIP_PERFEND(txput);
4105 
4106     if (sc->tulip_flags & TULIP_TXPROBE_ACTIVE) {
4107 	TULIP_CSR_WRITE(sc, csr_txpoll, 1);
4108 	sc->tulip_ifp->if_drv_flags |= IFF_DRV_OACTIVE;
4109 	TULIP_PERFEND(txput);
4110 	return NULL;
4111     }
4112 
4113     /*
4114      * switch back to the single queueing ifstart.
4115      */
4116     sc->tulip_flags &= ~TULIP_WANTTXSTART;
4117     if (sc->tulip_txtimer == 0)
4118 	sc->tulip_txtimer = TULIP_TXTIMER;
4119 #if defined(TULIP_DEBUG)
4120     sc->tulip_dbg.dbg_txput_finishes[5]++;
4121 #endif
4122 
4123     /*
4124      * If we want a txstart, there must be not enough space in the
4125      * transmit ring.  So we want to enable transmit done interrupts
4126      * so we can immediately reclaim some space.  When the transmit
4127      * interrupt is posted, the interrupt handler will call tx_intr
4128      * to reclaim space and then txstart (since WANTTXSTART is set).
4129      * txstart will move the packet into the transmit ring and clear
4130      * WANTTXSTART thereby causing TXINTR to be cleared.
4131      */
4132   finish:
4133 #if defined(TULIP_DEBUG)
4134     sc->tulip_dbg.dbg_txput_finishes[6]++;
4135 #endif
4136     if (sc->tulip_flags & (TULIP_WANTTXSTART|TULIP_DOINGSETUP)) {
4137 	sc->tulip_ifp->if_drv_flags |= IFF_DRV_OACTIVE;
4138 	if ((sc->tulip_intrmask & TULIP_STS_TXINTR) == 0) {
4139 	    sc->tulip_intrmask |= TULIP_STS_TXINTR;
4140 	    TULIP_CSR_WRITE(sc, csr_intr, sc->tulip_intrmask);
4141 	}
4142     } else if ((sc->tulip_flags & TULIP_PROMISC) == 0) {
4143 	if (sc->tulip_intrmask & TULIP_STS_TXINTR) {
4144 	    sc->tulip_intrmask &= ~TULIP_STS_TXINTR;
4145 	    TULIP_CSR_WRITE(sc, csr_intr, sc->tulip_intrmask);
4146 	}
4147     }
4148     TULIP_CSR_WRITE(sc, csr_txpoll, 1);
4149     TULIP_PERFEND(txput);
4150     return m;
4151 }
4152 
4153 static void
tulip_txput_setup(tulip_softc_t * const sc)4154 tulip_txput_setup(tulip_softc_t * const sc)
4155 {
4156     tulip_ringinfo_t * const ri = &sc->tulip_txinfo;
4157     tulip_desc_t *nextout;
4158 
4159     TULIP_LOCK_ASSERT(sc);
4160 
4161     /*
4162      * We will transmit, at most, one setup packet per call to ifstart.
4163      */
4164 
4165 #if defined(TULIP_DEBUG)
4166     if ((sc->tulip_cmdmode & TULIP_CMD_TXRUN) == 0) {
4167 	device_printf(sc->tulip_dev, "txput_setup: tx not running\n");
4168 	sc->tulip_flags |= TULIP_WANTTXSTART;
4169 	return;
4170     }
4171 #endif
4172     /*
4173      * Try to reclaim some free descriptors..
4174      */
4175     if (ri->ri_free < 2)
4176 	tulip_tx_intr(sc);
4177     if ((sc->tulip_flags & TULIP_DOINGSETUP) || ri->ri_free == 1) {
4178 	sc->tulip_flags |= TULIP_WANTTXSTART;
4179 	return;
4180     }
4181     bcopy(sc->tulip_setupdata, sc->tulip_setupbuf,
4182 	  sizeof(sc->tulip_setupdata));
4183     /*
4184      * Clear WANTSETUP and set DOINGSETUP.  Since we know that WANTSETUP is
4185      * set and DOINGSETUP is clear doing an XOR of the two will DTRT.
4186      */
4187     sc->tulip_flags ^= TULIP_WANTSETUP|TULIP_DOINGSETUP;
4188     ri->ri_free--;
4189     nextout = ri->ri_nextout->di_desc;
4190     nextout->d_flag &= TULIP_DFLAG_ENDRING|TULIP_DFLAG_CHAIN;
4191     nextout->d_flag |= TULIP_DFLAG_TxFIRSTSEG|TULIP_DFLAG_TxLASTSEG
4192 	|TULIP_DFLAG_TxSETUPPKT|TULIP_DFLAG_TxWANTINTR;
4193     if (sc->tulip_flags & TULIP_WANTHASHPERFECT)
4194 	nextout->d_flag |= TULIP_DFLAG_TxHASHFILT;
4195     else if (sc->tulip_flags & TULIP_WANTHASHONLY)
4196 	nextout->d_flag |= TULIP_DFLAG_TxHASHFILT|TULIP_DFLAG_TxINVRSFILT;
4197 
4198     nextout->d_length2 = 0;
4199     nextout->d_addr2 = 0;
4200     nextout->d_length1 = sizeof(sc->tulip_setupdata);
4201     nextout->d_addr1 = sc->tulip_setup_dma_addr & 0xffffffff;
4202     bus_dmamap_sync(sc->tulip_setup_tag, sc->tulip_setup_map,
4203 	BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
4204     TULIP_TXDESC_PRESYNC(ri);
4205     CTR1(KTR_TULIP, "tulip_txput_setup: using descriptor %td",
4206 	ri->ri_nextout - ri->ri_first);
4207 
4208     /*
4209      * Advance the ring for the next transmit packet.
4210      */
4211     if (++ri->ri_nextout == ri->ri_last)
4212 	ri->ri_nextout = ri->ri_first;
4213 
4214     /*
4215      * Make sure the next descriptor is owned by us since it
4216      * may have been set up above if we ran out of room in the
4217      * ring.
4218      */
4219     ri->ri_nextout->di_desc->d_status = 0;
4220     TULIP_TXDESC_PRESYNC(ri);
4221     nextout->d_status = TULIP_DSTS_OWNER;
4222     /*
4223      * Flush the ownwership of the current descriptor
4224      */
4225     TULIP_TXDESC_PRESYNC(ri);
4226     TULIP_CSR_WRITE(sc, csr_txpoll, 1);
4227     if ((sc->tulip_intrmask & TULIP_STS_TXINTR) == 0) {
4228 	sc->tulip_intrmask |= TULIP_STS_TXINTR;
4229 	TULIP_CSR_WRITE(sc, csr_intr, sc->tulip_intrmask);
4230     }
4231 }
4232 
4233 static int
tulip_ifioctl(struct ifnet * ifp,u_long cmd,caddr_t data)4234 tulip_ifioctl(struct ifnet * ifp, u_long cmd, caddr_t data)
4235 {
4236     TULIP_PERFSTART(ifioctl)
4237     tulip_softc_t * const sc = (tulip_softc_t *)ifp->if_softc;
4238     struct ifreq *ifr = (struct ifreq *) data;
4239     int error = 0;
4240 
4241     switch (cmd) {
4242 	case SIOCSIFFLAGS: {
4243 	    TULIP_LOCK(sc);
4244 	    tulip_init_locked(sc);
4245 	    TULIP_UNLOCK(sc);
4246 	    break;
4247 	}
4248 
4249 	case SIOCSIFMEDIA:
4250 	case SIOCGIFMEDIA: {
4251 	    error = ifmedia_ioctl(ifp, ifr, &sc->tulip_ifmedia, cmd);
4252 	    break;
4253 	}
4254 
4255 	case SIOCADDMULTI:
4256 	case SIOCDELMULTI: {
4257 	    /*
4258 	     * Update multicast listeners
4259 	     */
4260 	    TULIP_LOCK(sc);
4261 	    tulip_init_locked(sc);
4262 	    TULIP_UNLOCK(sc);
4263 	    error = 0;
4264 	    break;
4265 	}
4266 
4267 	default: {
4268 	    error = ether_ioctl(ifp, cmd, data);
4269 	    break;
4270 	}
4271     }
4272 
4273     TULIP_PERFEND(ifioctl);
4274     return error;
4275 }
4276 
4277 static void
tulip_start(struct ifnet * const ifp)4278 tulip_start(struct ifnet * const ifp)
4279 {
4280     TULIP_PERFSTART(ifstart)
4281     tulip_softc_t * const sc = (tulip_softc_t *)ifp->if_softc;
4282 
4283     TULIP_LOCK(sc);
4284     tulip_start_locked(sc);
4285     TULIP_UNLOCK(sc);
4286 
4287     TULIP_PERFEND(ifstart);
4288 }
4289 
4290 static void
tulip_start_locked(tulip_softc_t * const sc)4291 tulip_start_locked(tulip_softc_t * const sc)
4292 {
4293     struct mbuf *m;
4294 
4295     TULIP_LOCK_ASSERT(sc);
4296 
4297     CTR0(KTR_TULIP, "tulip_start_locked invoked");
4298     if ((sc->tulip_flags & (TULIP_WANTSETUP|TULIP_TXPROBE_ACTIVE)) == TULIP_WANTSETUP)
4299 	tulip_txput_setup(sc);
4300 
4301     CTR1(KTR_TULIP, "tulip_start_locked: %d tx packets pending",
4302 	sc->tulip_ifp->if_snd.ifq_len);
4303     while (!IFQ_DRV_IS_EMPTY(&sc->tulip_ifp->if_snd)) {
4304 	IFQ_DRV_DEQUEUE(&sc->tulip_ifp->if_snd, m);
4305 	if(m == NULL)
4306 	    break;
4307 	if ((m = tulip_txput(sc, m)) != NULL) {
4308 	    IFQ_DRV_PREPEND(&sc->tulip_ifp->if_snd, m);
4309 	    break;
4310 	}
4311     }
4312 }
4313 
4314 static void
tulip_watchdog(void * arg)4315 tulip_watchdog(void *arg)
4316 {
4317     TULIP_PERFSTART(stat)
4318     tulip_softc_t *sc = arg;
4319 #if defined(TULIP_DEBUG)
4320     u_int32_t rxintrs;
4321 #endif
4322 
4323     TULIP_LOCK_ASSERT(sc);
4324     callout_reset(&sc->tulip_stat_timer, hz, tulip_watchdog, sc);
4325 #if defined(TULIP_DEBUG)
4326     rxintrs = sc->tulip_dbg.dbg_rxintrs - sc->tulip_dbg.dbg_last_rxintrs;
4327     if (rxintrs > sc->tulip_dbg.dbg_high_rxintrs_hz)
4328 	sc->tulip_dbg.dbg_high_rxintrs_hz = rxintrs;
4329     sc->tulip_dbg.dbg_last_rxintrs = sc->tulip_dbg.dbg_rxintrs;
4330 #endif /* TULIP_DEBUG */
4331 
4332     /*
4333      * These should be rare so do a bulk test up front so we can just skip
4334      * them if needed.
4335      */
4336     if (sc->tulip_flags & (TULIP_SYSTEMERROR|TULIP_RXBUFSLOW|TULIP_NOMESSAGES)) {
4337 	/*
4338 	 * If the number of receive buffer is low, try to refill
4339 	 */
4340 	if (sc->tulip_flags & TULIP_RXBUFSLOW)
4341 	    tulip_rx_intr(sc);
4342 
4343 	if (sc->tulip_flags & TULIP_SYSTEMERROR) {
4344 	    if_printf(sc->tulip_ifp, "%d system errors: last was %s\n",
4345 		   sc->tulip_system_errors,
4346 		   tulip_system_errors[sc->tulip_last_system_error]);
4347 	}
4348 	if (sc->tulip_statusbits) {
4349 	    tulip_print_abnormal_interrupt(sc, sc->tulip_statusbits);
4350 	    sc->tulip_statusbits = 0;
4351 	}
4352 
4353 	sc->tulip_flags &= ~(TULIP_NOMESSAGES|TULIP_SYSTEMERROR);
4354     }
4355 
4356     if (sc->tulip_txtimer)
4357 	tulip_tx_intr(sc);
4358     if (sc->tulip_txtimer && --sc->tulip_txtimer == 0) {
4359 	if_printf(sc->tulip_ifp, "transmission timeout\n");
4360 	if (TULIP_DO_AUTOSENSE(sc)) {
4361 	    sc->tulip_media = TULIP_MEDIA_UNKNOWN;
4362 	    sc->tulip_probe_state = TULIP_PROBE_INACTIVE;
4363 	    sc->tulip_flags &= ~(TULIP_WANTRXACT|TULIP_LINKUP);
4364 	}
4365 	tulip_reset(sc);
4366 	tulip_init_locked(sc);
4367     }
4368 
4369     TULIP_PERFEND(stat);
4370     TULIP_PERFMERGE(sc, perf_intr_cycles);
4371     TULIP_PERFMERGE(sc, perf_ifstart_cycles);
4372     TULIP_PERFMERGE(sc, perf_ifioctl_cycles);
4373     TULIP_PERFMERGE(sc, perf_stat_cycles);
4374     TULIP_PERFMERGE(sc, perf_timeout_cycles);
4375     TULIP_PERFMERGE(sc, perf_ifstart_one_cycles);
4376     TULIP_PERFMERGE(sc, perf_txput_cycles);
4377     TULIP_PERFMERGE(sc, perf_txintr_cycles);
4378     TULIP_PERFMERGE(sc, perf_rxintr_cycles);
4379     TULIP_PERFMERGE(sc, perf_rxget_cycles);
4380     TULIP_PERFMERGE(sc, perf_intr);
4381     TULIP_PERFMERGE(sc, perf_ifstart);
4382     TULIP_PERFMERGE(sc, perf_ifioctl);
4383     TULIP_PERFMERGE(sc, perf_stat);
4384     TULIP_PERFMERGE(sc, perf_timeout);
4385     TULIP_PERFMERGE(sc, perf_ifstart_one);
4386     TULIP_PERFMERGE(sc, perf_txput);
4387     TULIP_PERFMERGE(sc, perf_txintr);
4388     TULIP_PERFMERGE(sc, perf_rxintr);
4389     TULIP_PERFMERGE(sc, perf_rxget);
4390 }
4391 
4392 static void
tulip_attach(tulip_softc_t * const sc)4393 tulip_attach(tulip_softc_t * const sc)
4394 {
4395     struct ifnet *ifp;
4396 
4397     ifp = sc->tulip_ifp = if_alloc(IFT_ETHER);
4398 
4399     /* XXX: driver name/unit should be set some other way */
4400     if_initname(ifp, "de", sc->tulip_unit);
4401     ifp->if_softc = sc;
4402     ifp->if_flags = IFF_BROADCAST|IFF_SIMPLEX|IFF_MULTICAST;
4403     ifp->if_ioctl = tulip_ifioctl;
4404     ifp->if_start = tulip_start;
4405     ifp->if_init = tulip_init;
4406     IFQ_SET_MAXLEN(&ifp->if_snd, ifqmaxlen);
4407     ifp->if_snd.ifq_drv_maxlen = ifqmaxlen;
4408     IFQ_SET_READY(&ifp->if_snd);
4409 
4410     device_printf(sc->tulip_dev, "%s%s pass %d.%d%s\n",
4411 	   sc->tulip_boardid,
4412 	   tulip_chipdescs[sc->tulip_chipid],
4413 	   (sc->tulip_revinfo & 0xF0) >> 4,
4414 	   sc->tulip_revinfo & 0x0F,
4415 	   (sc->tulip_features & (TULIP_HAVE_ISVSROM|TULIP_HAVE_OKSROM))
4416 		 == TULIP_HAVE_ISVSROM ? " (invalid EESPROM checksum)" : "");
4417 
4418     TULIP_LOCK(sc);
4419     (*sc->tulip_boardsw->bd_media_probe)(sc);
4420     ifmedia_init(&sc->tulip_ifmedia, 0,
4421 		 tulip_ifmedia_change,
4422 		 tulip_ifmedia_status);
4423     tulip_ifmedia_add(sc);
4424 
4425     tulip_reset(sc);
4426     TULIP_UNLOCK(sc);
4427 
4428     ether_ifattach(sc->tulip_ifp, sc->tulip_enaddr);
4429 
4430     TULIP_LOCK(sc);
4431     sc->tulip_flags &= ~TULIP_DEVICEPROBE;
4432     TULIP_UNLOCK(sc);
4433 }
4434 
4435 /* Release memory for a single descriptor ring. */
4436 static void
tulip_busdma_freering(tulip_ringinfo_t * ri)4437 tulip_busdma_freering(tulip_ringinfo_t *ri)
4438 {
4439     int i;
4440 
4441     /* Release the DMA maps and tag for data buffers. */
4442     if (ri->ri_data_maps != NULL) {
4443 	for (i = 0; i < ri->ri_max; i++) {
4444 	    if (ri->ri_data_maps[i] != NULL) {
4445 		bus_dmamap_destroy(ri->ri_data_tag, ri->ri_data_maps[i]);
4446 		ri->ri_data_maps[i] = NULL;
4447 	    }
4448 	}
4449 	free(ri->ri_data_maps, M_DEVBUF);
4450 	ri->ri_data_maps = NULL;
4451     }
4452     if (ri->ri_data_tag != NULL) {
4453 	bus_dma_tag_destroy(ri->ri_data_tag);
4454 	ri->ri_data_tag = NULL;
4455     }
4456 
4457     /* Release the DMA memory and tag for the ring descriptors. */
4458     if (ri->ri_dma_addr != 0) {
4459 	bus_dmamap_unload(ri->ri_ring_tag, ri->ri_ring_map);
4460 	ri->ri_dma_addr = 0;
4461     }
4462     if (ri->ri_descs != NULL) {
4463 	bus_dmamem_free(ri->ri_ring_tag, ri->ri_descs, ri->ri_ring_map);
4464 	ri->ri_descs = NULL;
4465     }
4466     if (ri->ri_ring_tag != NULL) {
4467 	bus_dma_tag_destroy(ri->ri_ring_tag);
4468 	ri->ri_ring_tag = NULL;
4469     }
4470 }
4471 
4472 /* Allocate memory for a single descriptor ring. */
4473 static int
tulip_busdma_allocring(device_t dev,tulip_softc_t * const sc,size_t count,bus_size_t align,int nsegs,tulip_ringinfo_t * ri,const char * name)4474 tulip_busdma_allocring(device_t dev, tulip_softc_t * const sc, size_t count,
4475     bus_size_t align, int nsegs, tulip_ringinfo_t *ri, const char *name)
4476 {
4477     size_t size;
4478     int error, i;
4479 
4480     /* First, setup a tag. */
4481     ri->ri_max = count;
4482     size = count * sizeof(tulip_desc_t);
4483     error = bus_dma_tag_create(bus_get_dma_tag(dev),
4484 	32, 0, BUS_SPACE_MAXADDR_32BIT,
4485 	BUS_SPACE_MAXADDR, NULL, NULL, size, 1, size, 0, NULL, NULL,
4486 	&ri->ri_ring_tag);
4487     if (error) {
4488 	device_printf(dev, "failed to allocate %s descriptor ring dma tag\n",
4489 	    name);
4490 	return (error);
4491     }
4492 
4493     /* Next, allocate memory for the descriptors. */
4494     error = bus_dmamem_alloc(ri->ri_ring_tag, (void **)&ri->ri_descs,
4495 	BUS_DMA_NOWAIT | BUS_DMA_ZERO, &ri->ri_ring_map);
4496     if (error) {
4497 	device_printf(dev, "failed to allocate memory for %s descriptor ring\n",
4498 	    name);
4499 	return (error);
4500     }
4501 
4502     /* Map the descriptors. */
4503     error = bus_dmamap_load(ri->ri_ring_tag, ri->ri_ring_map, ri->ri_descs,
4504 	size, tulip_dma_map_addr, &ri->ri_dma_addr, BUS_DMA_NOWAIT);
4505     if (error) {
4506 	device_printf(dev, "failed to get dma address for %s descriptor ring\n",
4507 	    name);
4508 	return (error);
4509     }
4510 
4511     /* Allocate a tag for the data buffers. */
4512     error = bus_dma_tag_create(bus_get_dma_tag(dev), align, 0,
4513 	BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL,
4514 	MCLBYTES * nsegs, nsegs, MCLBYTES, 0, NULL, NULL, &ri->ri_data_tag);
4515     if (error) {
4516 	device_printf(dev, "failed to allocate %s buffer dma tag\n", name);
4517 	return (error);
4518     }
4519 
4520     /* Allocate maps for the data buffers. */
4521     ri->ri_data_maps = malloc(sizeof(bus_dmamap_t) * count, M_DEVBUF,
4522 	M_WAITOK | M_ZERO);
4523     for (i = 0; i < count; i++) {
4524     	error = bus_dmamap_create(ri->ri_data_tag, 0, &ri->ri_data_maps[i]);
4525 	if (error) {
4526 	    device_printf(dev, "failed to create map for %s buffer %d\n",
4527 		name, i);
4528 	    return (error);
4529 	}
4530     }
4531 
4532     return (0);
4533 }
4534 
4535 /* Release busdma maps, tags, and memory. */
4536 static void
tulip_busdma_cleanup(tulip_softc_t * const sc)4537 tulip_busdma_cleanup(tulip_softc_t * const sc)
4538 {
4539 
4540     /* Release resources for the setup descriptor. */
4541     if (sc->tulip_setup_dma_addr != 0) {
4542 	bus_dmamap_unload(sc->tulip_setup_tag, sc->tulip_setup_map);
4543 	sc->tulip_setup_dma_addr = 0;
4544     }
4545     if (sc->tulip_setupbuf != NULL) {
4546 	bus_dmamem_free(sc->tulip_setup_tag, sc->tulip_setupbuf,
4547 	    sc->tulip_setup_map);
4548 	sc->tulip_setupbuf = NULL;
4549     }
4550     if (sc->tulip_setup_tag != NULL) {
4551 	bus_dma_tag_destroy(sc->tulip_setup_tag);
4552 	sc->tulip_setup_tag = NULL;
4553     }
4554 
4555     /* Release the transmit ring. */
4556     tulip_busdma_freering(&sc->tulip_txinfo);
4557 
4558     /* Release the receive ring. */
4559     tulip_busdma_freering(&sc->tulip_rxinfo);
4560 }
4561 
4562 static int
tulip_busdma_init(device_t dev,tulip_softc_t * const sc)4563 tulip_busdma_init(device_t dev, tulip_softc_t * const sc)
4564 {
4565     int error;
4566 
4567     /*
4568      * Allocate space and dmamap for transmit ring.
4569      */
4570     error = tulip_busdma_allocring(dev, sc, TULIP_TXDESCS, 1, TULIP_MAX_TXSEG,
4571 	&sc->tulip_txinfo, "transmit");
4572     if (error)
4573 	return (error);
4574 
4575     /*
4576      * Allocate space and dmamap for receive ring.  We tell bus_dma that
4577      * we can map MCLBYTES so that it will accept a full MCLBYTES cluster,
4578      * but we will only map the first TULIP_RX_BUFLEN bytes.  This is not
4579      * a waste in practice though as an ethernet frame can easily fit
4580      * in TULIP_RX_BUFLEN bytes.
4581      */
4582     error = tulip_busdma_allocring(dev, sc, TULIP_RXDESCS, 4, 1,
4583 	&sc->tulip_rxinfo, "receive");
4584     if (error)
4585 	return (error);
4586 
4587     /*
4588      * Allocate a DMA tag, memory, and map for setup descriptor
4589      */
4590     error = bus_dma_tag_create(bus_get_dma_tag(dev), 32, 0,
4591 	BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL,
4592 	sizeof(sc->tulip_setupdata), 1, sizeof(sc->tulip_setupdata), 0,
4593 	NULL, NULL, &sc->tulip_setup_tag);
4594     if (error) {
4595 	device_printf(dev, "failed to allocate setup descriptor dma tag\n");
4596 	return (error);
4597     }
4598     error = bus_dmamem_alloc(sc->tulip_setup_tag, (void **)&sc->tulip_setupbuf,
4599 	BUS_DMA_NOWAIT | BUS_DMA_ZERO, &sc->tulip_setup_map);
4600     if (error) {
4601 	device_printf(dev, "failed to allocate memory for setup descriptor\n");
4602 	return (error);
4603     }
4604     error = bus_dmamap_load(sc->tulip_setup_tag, sc->tulip_setup_map,
4605 	sc->tulip_setupbuf, sizeof(sc->tulip_setupdata),
4606 	tulip_dma_map_addr, &sc->tulip_setup_dma_addr, BUS_DMA_NOWAIT);
4607     if (error) {
4608 	device_printf(dev, "failed to get dma address for setup descriptor\n");
4609 	return (error);
4610     }
4611 
4612     return error;
4613 }
4614 
4615 static void
tulip_initcsrs(tulip_softc_t * const sc,tulip_csrptr_t csr_base,size_t csr_size)4616 tulip_initcsrs(tulip_softc_t * const sc, tulip_csrptr_t csr_base,
4617     size_t csr_size)
4618 {
4619     sc->tulip_csrs.csr_busmode		= csr_base +  0 * csr_size;
4620     sc->tulip_csrs.csr_txpoll		= csr_base +  1 * csr_size;
4621     sc->tulip_csrs.csr_rxpoll		= csr_base +  2 * csr_size;
4622     sc->tulip_csrs.csr_rxlist		= csr_base +  3 * csr_size;
4623     sc->tulip_csrs.csr_txlist		= csr_base +  4 * csr_size;
4624     sc->tulip_csrs.csr_status		= csr_base +  5 * csr_size;
4625     sc->tulip_csrs.csr_command		= csr_base +  6 * csr_size;
4626     sc->tulip_csrs.csr_intr		= csr_base +  7 * csr_size;
4627     sc->tulip_csrs.csr_missed_frames	= csr_base +  8 * csr_size;
4628     sc->tulip_csrs.csr_9		= csr_base +  9 * csr_size;
4629     sc->tulip_csrs.csr_10		= csr_base + 10 * csr_size;
4630     sc->tulip_csrs.csr_11		= csr_base + 11 * csr_size;
4631     sc->tulip_csrs.csr_12		= csr_base + 12 * csr_size;
4632     sc->tulip_csrs.csr_13		= csr_base + 13 * csr_size;
4633     sc->tulip_csrs.csr_14		= csr_base + 14 * csr_size;
4634     sc->tulip_csrs.csr_15		= csr_base + 15 * csr_size;
4635 }
4636 
4637 static int
tulip_initring(device_t dev,tulip_softc_t * const sc,tulip_ringinfo_t * const ri,int ndescs)4638 tulip_initring(
4639     device_t dev,
4640     tulip_softc_t * const sc,
4641     tulip_ringinfo_t * const ri,
4642     int ndescs)
4643 {
4644     int i;
4645 
4646     ri->ri_descinfo = malloc(sizeof(tulip_descinfo_t) * ndescs, M_DEVBUF,
4647 	M_WAITOK | M_ZERO);
4648     for (i = 0; i < ndescs; i++) {
4649 	ri->ri_descinfo[i].di_desc = &ri->ri_descs[i];
4650 	ri->ri_descinfo[i].di_map = &ri->ri_data_maps[i];
4651     }
4652     ri->ri_first = ri->ri_descinfo;
4653     ri->ri_max = ndescs;
4654     ri->ri_last = ri->ri_first + ri->ri_max;
4655     bzero(ri->ri_descs, sizeof(tulip_desc_t) * ri->ri_max);
4656     ri->ri_last[-1].di_desc->d_flag = TULIP_DFLAG_ENDRING;
4657     return (0);
4658 }
4659 
4660 /*
4661  * This is the PCI configuration support.
4662  */
4663 
4664 #define	PCI_CBIO	PCIR_BAR(0)	/* Configuration Base IO Address */
4665 #define	PCI_CBMA	PCIR_BAR(1)	/* Configuration Base Memory Address */
4666 #define	PCI_CFDA	0x40	/* Configuration Driver Area */
4667 
4668 static int
tulip_pci_probe(device_t dev)4669 tulip_pci_probe(device_t dev)
4670 {
4671     const char *name = NULL;
4672 
4673     if (pci_get_vendor(dev) != DEC_VENDORID)
4674 	return ENXIO;
4675 
4676     /*
4677      * Some LanMedia WAN cards use the Tulip chip, but they have
4678      * their own driver, and we should not recognize them
4679      */
4680     if (pci_get_subvendor(dev) == 0x1376)
4681 	return ENXIO;
4682 
4683     switch (pci_get_device(dev)) {
4684     case CHIPID_21040:
4685 	name = "Digital 21040 Ethernet";
4686 	break;
4687     case CHIPID_21041:
4688 	name = "Digital 21041 Ethernet";
4689 	break;
4690     case CHIPID_21140:
4691 	if (pci_get_revid(dev) >= 0x20)
4692 	    name = "Digital 21140A Fast Ethernet";
4693 	else
4694 	    name = "Digital 21140 Fast Ethernet";
4695 	break;
4696 #ifndef __HAIKU__
4697 	case CHIPID_21142:
4698 	/*
4699 	 * The card with the same id is supported by if_dc - screen it to
4700 	 * prevent duplicated dev entries.
4701 	 */
4702 	if (pci_get_revid(dev) >= 0x20)
4703 	    name = "Digital 21143 Fast Ethernet";
4704 	else
4705 	    name = "Digital 21142 Fast Ethernet";
4706 	break;
4707 #endif
4708     }
4709     if (name) {
4710 	device_set_desc(dev, name);
4711 	return BUS_PROBE_LOW_PRIORITY;
4712     }
4713     return ENXIO;
4714 }
4715 
4716 static int
tulip_shutdown(device_t dev)4717 tulip_shutdown(device_t dev)
4718 {
4719     tulip_softc_t * const sc = device_get_softc(dev);
4720     TULIP_CSR_WRITE(sc, csr_busmode, TULIP_BUSMODE_SWRESET);
4721     DELAY(10);	/* Wait 10 microseconds (actually 50 PCI cycles but at
4722 		   33MHz that comes to two microseconds but wait a
4723 		   bit longer anyways) */
4724     return 0;
4725 }
4726 
4727 static int
tulip_pci_attach(device_t dev)4728 tulip_pci_attach(device_t dev)
4729 {
4730     tulip_softc_t *sc;
4731     int retval, idx;
4732     u_int32_t revinfo, cfdainfo;
4733     unsigned csroffset = TULIP_PCI_CSROFFSET;
4734     unsigned csrsize = TULIP_PCI_CSRSIZE;
4735     tulip_csrptr_t csr_base;
4736     tulip_chipid_t chipid = TULIP_CHIPID_UNKNOWN;
4737     struct resource *res;
4738     int rid, unit;
4739 
4740     unit = device_get_unit(dev);
4741 
4742     if (unit >= TULIP_MAX_DEVICES) {
4743 	device_printf(dev, "not configured; limit of %d reached or exceeded\n",
4744 	       TULIP_MAX_DEVICES);
4745 	return ENXIO;
4746     }
4747 
4748     revinfo  = pci_get_revid(dev);
4749     cfdainfo = pci_read_config(dev, PCI_CFDA, 4);
4750 
4751     /* turn busmaster on in case BIOS doesn't set it */
4752     pci_enable_busmaster(dev);
4753 
4754     if (pci_get_vendor(dev) == DEC_VENDORID) {
4755 	if (pci_get_device(dev) == CHIPID_21040)
4756 		chipid = TULIP_21040;
4757 	else if (pci_get_device(dev) == CHIPID_21041)
4758 		chipid = TULIP_21041;
4759 	else if (pci_get_device(dev) == CHIPID_21140)
4760 		chipid = (revinfo >= 0x20) ? TULIP_21140A : TULIP_21140;
4761 	else if (pci_get_device(dev) == CHIPID_21142)
4762 		chipid = (revinfo >= 0x20) ? TULIP_21143 : TULIP_21142;
4763     }
4764     if (chipid == TULIP_CHIPID_UNKNOWN)
4765 	return ENXIO;
4766 
4767     if (chipid == TULIP_21040 && revinfo < 0x20) {
4768 	device_printf(dev,
4769 	    "not configured; 21040 pass 2.0 required (%d.%d found)\n",
4770 	    revinfo >> 4, revinfo & 0x0f);
4771 	return ENXIO;
4772     } else if (chipid == TULIP_21140 && revinfo < 0x11) {
4773 	device_printf(dev,
4774 	    "not configured; 21140 pass 1.1 required (%d.%d found)\n",
4775 	    revinfo >> 4, revinfo & 0x0f);
4776 	return ENXIO;
4777     }
4778 
4779     sc = device_get_softc(dev);
4780     sc->tulip_dev = dev;
4781     sc->tulip_pci_busno = pci_get_bus(dev);
4782     sc->tulip_pci_devno = pci_get_slot(dev);
4783     sc->tulip_chipid = chipid;
4784     sc->tulip_flags |= TULIP_DEVICEPROBE;
4785     if (chipid == TULIP_21140 || chipid == TULIP_21140A)
4786 	sc->tulip_features |= TULIP_HAVE_GPR|TULIP_HAVE_STOREFWD;
4787     if (chipid == TULIP_21140A && revinfo <= 0x22)
4788 	sc->tulip_features |= TULIP_HAVE_RXBADOVRFLW;
4789     if (chipid == TULIP_21140)
4790 	sc->tulip_features |= TULIP_HAVE_BROKEN_HASH;
4791     if (chipid != TULIP_21040 && chipid != TULIP_21140)
4792 	sc->tulip_features |= TULIP_HAVE_POWERMGMT;
4793     if (chipid == TULIP_21041 || chipid == TULIP_21142 || chipid == TULIP_21143) {
4794 	sc->tulip_features |= TULIP_HAVE_DUALSENSE;
4795 	if (chipid != TULIP_21041 || revinfo >= 0x20)
4796 	    sc->tulip_features |= TULIP_HAVE_SIANWAY;
4797 	if (chipid != TULIP_21041)
4798 	    sc->tulip_features |= TULIP_HAVE_SIAGP|TULIP_HAVE_RXBADOVRFLW|TULIP_HAVE_STOREFWD;
4799 	if (chipid != TULIP_21041 && revinfo >= 0x20)
4800 	    sc->tulip_features |= TULIP_HAVE_SIA100;
4801     }
4802 
4803     if (sc->tulip_features & TULIP_HAVE_POWERMGMT
4804 	    && (cfdainfo & (TULIP_CFDA_SLEEP|TULIP_CFDA_SNOOZE))) {
4805 	cfdainfo &= ~(TULIP_CFDA_SLEEP|TULIP_CFDA_SNOOZE);
4806 	pci_write_config(dev, PCI_CFDA, cfdainfo, 4);
4807 	DELAY(11*1000);
4808     }
4809 
4810     sc->tulip_unit = unit;
4811     sc->tulip_revinfo = revinfo;
4812 #if defined(TULIP_IOMAPPED)
4813     rid = PCI_CBIO;
4814     res = bus_alloc_resource_any(dev, SYS_RES_IOPORT, &rid, RF_ACTIVE);
4815 #else
4816     rid = PCI_CBMA;
4817     res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid, RF_ACTIVE);
4818 #endif
4819     if (!res)
4820 	return ENXIO;
4821     sc->tulip_csrs_bst = rman_get_bustag(res);
4822     sc->tulip_csrs_bsh = rman_get_bushandle(res);
4823     csr_base = 0;
4824 
4825     mtx_init(TULIP_MUTEX(sc), MTX_NETWORK_LOCK, device_get_nameunit(dev),
4826 	MTX_DEF);
4827     callout_init_mtx(&sc->tulip_callout, TULIP_MUTEX(sc), 0);
4828     callout_init_mtx(&sc->tulip_stat_timer, TULIP_MUTEX(sc), 0);
4829     tulips[unit] = sc;
4830 
4831     tulip_initcsrs(sc, csr_base + csroffset, csrsize);
4832 
4833     if ((retval = tulip_busdma_init(dev, sc)) != 0) {
4834 	device_printf(dev, "error initing bus_dma: %d\n", retval);
4835 	tulip_busdma_cleanup(sc);
4836 	mtx_destroy(TULIP_MUTEX(sc));
4837 	return ENXIO;
4838     }
4839 
4840     retval = tulip_initring(dev, sc, &sc->tulip_rxinfo, TULIP_RXDESCS);
4841     if (retval == 0)
4842 	retval = tulip_initring(dev, sc, &sc->tulip_txinfo, TULIP_TXDESCS);
4843     if (retval) {
4844 	tulip_busdma_cleanup(sc);
4845 	mtx_destroy(TULIP_MUTEX(sc));
4846 	return retval;
4847     }
4848 
4849     /*
4850      * Make sure there won't be any interrupts or such...
4851      */
4852     TULIP_CSR_WRITE(sc, csr_busmode, TULIP_BUSMODE_SWRESET);
4853     DELAY(100);	/* Wait 10 microseconds (actually 50 PCI cycles but at
4854 		   33MHz that comes to two microseconds but wait a
4855 		   bit longer anyways) */
4856 
4857     TULIP_LOCK(sc);
4858     retval = tulip_read_macaddr(sc);
4859     TULIP_UNLOCK(sc);
4860     if (retval < 0) {
4861 	device_printf(dev, "can't read ENET ROM (why=%d) (", retval);
4862 	for (idx = 0; idx < 32; idx++)
4863 	    printf("%02x", sc->tulip_rombuf[idx]);
4864 	printf("\n");
4865 	device_printf(dev, "%s%s pass %d.%d\n",
4866 	       sc->tulip_boardid, tulip_chipdescs[sc->tulip_chipid],
4867 	       (sc->tulip_revinfo & 0xF0) >> 4, sc->tulip_revinfo & 0x0F);
4868 	device_printf(dev, "address unknown\n");
4869     } else {
4870 	void (*intr_rtn)(void *) = tulip_intr_normal;
4871 
4872 	if (sc->tulip_features & TULIP_HAVE_SHAREDINTR)
4873 	    intr_rtn = tulip_intr_shared;
4874 
4875 	tulip_attach(sc);
4876 
4877 	/* Setup interrupt last. */
4878 	if ((sc->tulip_features & TULIP_HAVE_SLAVEDINTR) == 0) {
4879 	    void *ih;
4880 
4881 	    rid = 0;
4882 	    res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
4883 					 RF_SHAREABLE | RF_ACTIVE);
4884 	    if (res == NULL || bus_setup_intr(dev, res, INTR_TYPE_NET |
4885                                               INTR_MPSAFE, NULL, intr_rtn, sc, &ih)) {
4886 		device_printf(dev, "couldn't map interrupt\n");
4887 		tulip_busdma_cleanup(sc);
4888 		ether_ifdetach(sc->tulip_ifp);
4889 		if_free(sc->tulip_ifp);
4890 		mtx_destroy(TULIP_MUTEX(sc));
4891 		return ENXIO;
4892 	    }
4893 	}
4894     }
4895     return 0;
4896 }
4897 
4898 static device_method_t tulip_pci_methods[] = {
4899     /* Device interface */
4900     DEVMETHOD(device_probe,	tulip_pci_probe),
4901     DEVMETHOD(device_attach,	tulip_pci_attach),
4902     DEVMETHOD(device_shutdown,	tulip_shutdown),
4903     { 0, 0 }
4904 };
4905 
4906 static driver_t tulip_pci_driver = {
4907     "de",
4908     tulip_pci_methods,
4909     sizeof(tulip_softc_t),
4910 };
4911 
4912 DRIVER_MODULE(de, pci, tulip_pci_driver, 0, 0);
4913 
4914 #ifdef DDB
4915 void	tulip_dumpring(int unit, int ring);
4916 void	tulip_dumpdesc(int unit, int ring, int desc);
4917 void	tulip_status(int unit);
4918 
4919 void
tulip_dumpring(int unit,int ring)4920 tulip_dumpring(int unit, int ring)
4921 {
4922     tulip_softc_t *sc;
4923     tulip_ringinfo_t *ri;
4924     tulip_descinfo_t *di;
4925 
4926     if (unit < 0 || unit >= TULIP_MAX_DEVICES) {
4927 	db_printf("invalid unit %d\n", unit);
4928 	return;
4929     }
4930     sc = tulips[unit];
4931     if (sc == NULL) {
4932 	db_printf("unit %d not present\n", unit);
4933 	return;
4934     }
4935 
4936     switch (ring) {
4937     case 0:
4938 	db_printf("receive ring:\n");
4939 	ri = &sc->tulip_rxinfo;
4940 	break;
4941     case 1:
4942 	db_printf("transmit ring:\n");
4943 	ri = &sc->tulip_txinfo;
4944 	break;
4945     default:
4946 	db_printf("invalid ring %d\n", ring);
4947 	return;
4948     }
4949 
4950     db_printf(" nextin: %td, nextout: %td, max: %d, free: %d\n",
4951 	ri->ri_nextin - ri->ri_first, ri->ri_nextout - ri->ri_first,
4952 	ri->ri_max, ri->ri_free);
4953     for (di = ri->ri_first; di != ri->ri_last; di++) {
4954 	if (di->di_mbuf != NULL)
4955 	    db_printf(" descriptor %td: mbuf %p\n", di - ri->ri_first,
4956 		di->di_mbuf);
4957 	else if (di->di_desc->d_flag & TULIP_DFLAG_TxSETUPPKT)
4958 	    db_printf(" descriptor %td: setup packet\n", di - ri->ri_first);
4959     }
4960 }
4961 
4962 void
tulip_dumpdesc(int unit,int ring,int desc)4963 tulip_dumpdesc(int unit, int ring, int desc)
4964 {
4965     tulip_softc_t *sc;
4966     tulip_ringinfo_t *ri;
4967     tulip_descinfo_t *di;
4968     char *s;
4969 
4970     if (unit < 0 || unit >= TULIP_MAX_DEVICES) {
4971 	db_printf("invalid unit %d\n", unit);
4972 	return;
4973     }
4974     sc = tulips[unit];
4975     if (sc == NULL) {
4976 	db_printf("unit %d not present\n", unit);
4977 	return;
4978     }
4979 
4980     switch (ring) {
4981     case 0:
4982 	s = "receive";
4983 	ri = &sc->tulip_rxinfo;
4984 	break;
4985     case 1:
4986 	s = "transmit";
4987 	ri = &sc->tulip_txinfo;
4988 	break;
4989     default:
4990 	db_printf("invalid ring %d\n", ring);
4991 	return;
4992     }
4993 
4994     if (desc < 0 || desc >= ri->ri_max) {
4995 	db_printf("invalid descriptor %d\n", desc);
4996 	return;
4997     }
4998 
4999     db_printf("%s descriptor %d:\n", s, desc);
5000     di = &ri->ri_first[desc];
5001     db_printf(" mbuf: %p\n", di->di_mbuf);
5002     db_printf(" status: %08x  flag: %03x\n", di->di_desc->d_status,
5003 	di->di_desc->d_flag);
5004     db_printf("  addr1: %08x  len1: %03x\n", di->di_desc->d_addr1,
5005 	di->di_desc->d_length1);
5006     db_printf("  addr2: %08x  len2: %03x\n", di->di_desc->d_addr2,
5007 	di->di_desc->d_length2);
5008 }
5009 #endif
5010