1 /* 2 * Copyright 2007-2009, Marcus Overhagen. All rights reserved. 3 * Distributed under the terms of the MIT License. 4 */ 5 6 #include "ahci_controller.h" 7 #include "util.h" 8 9 #include <algorithm> 10 #include <KernelExport.h> 11 #include <stdio.h> 12 #include <string.h> 13 #include <new> 14 15 #define TRACE(a...) dprintf("ahci: " a) 16 #define FLOW(a...) dprintf("ahci: " a) 17 18 19 AHCIController::AHCIController(device_node *node, 20 pci_device_module_info *pciModule, pci_device *device) 21 : 22 fNode(node), 23 fPCI(pciModule), 24 fPCIDevice(device), 25 fPCIVendorID(0xffff), 26 fPCIDeviceID(0xffff), 27 fFlags(0), 28 fCommandSlotCount(0), 29 fPortCount(0), 30 fPortImplementedMask(0), 31 fIRQ(0), 32 fUseMSI(false), 33 fInstanceCheck(-1) 34 { 35 memset(fPort, 0, sizeof(fPort)); 36 37 ASSERT(sizeof(ahci_port) == 128); 38 ASSERT(sizeof(ahci_hba) == 4352); 39 ASSERT(sizeof(fis) == 256); 40 ASSERT(sizeof(command_list_entry) == 32); 41 ASSERT(sizeof(command_table) == 128); 42 ASSERT(sizeof(prd) == 16); 43 } 44 45 46 AHCIController::~AHCIController() 47 { 48 } 49 50 51 status_t 52 AHCIController::Init() 53 { 54 pci_info pciInfo; 55 fPCI->get_pci_info(fPCIDevice, &pciInfo); 56 57 fPCIVendorID = pciInfo.vendor_id; 58 fPCIDeviceID = pciInfo.device_id; 59 60 TRACE("AHCIController::Init %u:%u:%u vendor %04x, device %04x\n", 61 pciInfo.bus, pciInfo.device, pciInfo.function, fPCIVendorID, fPCIDeviceID); 62 63 // --- Instance check workaround begin 64 char sName[32]; 65 snprintf(sName, sizeof(sName), "ahci-inst-%u-%u-%u", pciInfo.bus, pciInfo.device, pciInfo.function); 66 if (find_port(sName) >= 0) { 67 dprintf("AHCIController::Init ERROR: an instance for object %u:%u:%u already exists\n", 68 pciInfo.bus, pciInfo.device, pciInfo.function); 69 return B_ERROR; 70 } 71 fInstanceCheck = create_port(1, sName); 72 // --- Instance check workaround end 73 74 get_device_info(fPCIVendorID, fPCIDeviceID, NULL, &fFlags); 75 76 uchar capabilityOffset; 77 status_t res = fPCI->find_pci_capability(fPCIDevice, PCI_cap_id_sata, &capabilityOffset); 78 if (res == B_OK) { 79 uint32 satacr0; 80 uint32 satacr1; 81 TRACE("PCI SATA capability found at offset 0x%x\n", capabilityOffset); 82 satacr0 = fPCI->read_pci_config(fPCIDevice, capabilityOffset, 4); 83 satacr1 = fPCI->read_pci_config(fPCIDevice, capabilityOffset + 4, 4); 84 TRACE("satacr0 = 0x%08" B_PRIx32 ", satacr1 = 0x%08" B_PRIx32 "\n", 85 satacr0, satacr1); 86 } 87 88 uint16 pcicmd = fPCI->read_pci_config(fPCIDevice, PCI_command, 2); 89 TRACE("pcicmd old 0x%04x\n", pcicmd); 90 pcicmd &= ~(PCI_command_io | PCI_command_int_disable); 91 pcicmd |= PCI_command_master | PCI_command_memory; 92 TRACE("pcicmd new 0x%04x\n", pcicmd); 93 fPCI->write_pci_config(fPCIDevice, PCI_command, 2, pcicmd); 94 95 if (fPCIVendorID == PCI_VENDOR_JMICRON) { 96 uint32 ctrl = fPCI->read_pci_config(fPCIDevice, PCI_JMICRON_CONTROLLER_CONTROL_1, 4); 97 TRACE("Jmicron controller control 1 old 0x%08" B_PRIx32 "\n", ctrl); 98 ctrl &= ~((1 << 9) | (1 << 12) | (1 << 14)); // disable SFF 8038i emulation 99 ctrl |= (1 << 8) | (1 << 13) | (1 << 15); // enable AHCI controller 100 TRACE("Jmicron controller control 1 new 0x%08" B_PRIx32 "\n", ctrl); 101 fPCI->write_pci_config(fPCIDevice, PCI_JMICRON_CONTROLLER_CONTROL_1, 4, ctrl); 102 } 103 104 fIRQ = pciInfo.u.h0.interrupt_line; 105 if (gPCIx86Module != NULL && gPCIx86Module->get_msi_count( 106 pciInfo.bus, pciInfo.device, pciInfo.function) >= 1) { 107 uint8 vector; 108 if (gPCIx86Module->configure_msi(pciInfo.bus, pciInfo.device, 109 pciInfo.function, 1, &vector) == B_OK 110 && gPCIx86Module->enable_msi(pciInfo.bus, pciInfo.device, 111 pciInfo.function) == B_OK) { 112 TRACE("using MSI vector %u\n", vector); 113 fIRQ = vector; 114 fUseMSI = true; 115 } else { 116 TRACE("couldn't use MSI\n"); 117 } 118 } 119 if (fIRQ == 0 || fIRQ == 0xff) { 120 TRACE("Error: PCI IRQ not assigned\n"); 121 return B_ERROR; 122 } 123 124 phys_addr_t addr = pciInfo.u.h0.base_registers[5]; 125 size_t size = pciInfo.u.h0.base_register_sizes[5]; 126 127 TRACE("registers at %#" B_PRIxPHYSADDR ", size %#" B_PRIxSIZE "\n", addr, 128 size); 129 if (addr == 0) { 130 TRACE("PCI base address register 5 not assigned\n"); 131 return B_ERROR; 132 } 133 134 fRegsArea = map_mem((void **)&fRegs, addr, size, 0, "AHCI HBA regs"); 135 if (fRegsArea < B_OK) { 136 TRACE("mapping registers failed\n"); 137 return B_ERROR; 138 } 139 140 // make sure interrupts are disabled 141 fRegs->ghc &= ~GHC_IE; 142 FlushPostedWrites(); 143 144 if (ResetController() < B_OK) { 145 TRACE("controller reset failed\n"); 146 goto err; 147 } 148 149 fCommandSlotCount = 1 + ((fRegs->cap >> CAP_NCS_SHIFT) & CAP_NCS_MASK); 150 fPortCount = 1 + ((fRegs->cap >> CAP_NP_SHIFT) & CAP_NP_MASK); 151 152 fPortImplementedMask = fRegs->pi; 153 // reported mask of implemented ports is sometimes empty 154 if (fPortImplementedMask == 0) { 155 fPortImplementedMask = 0xffffffff >> (32 - fPortCount); 156 TRACE("ports-implemented mask is zero, using 0x%" B_PRIx32 " instead.\n", 157 fPortImplementedMask); 158 } 159 160 // reported number of ports is sometimes too small 161 int highestPort; 162 highestPort = fls(fPortImplementedMask); // 1-based, 1 to 32 163 if (fPortCount < highestPort) { 164 TRACE("reported number of ports is wrong, using %d instead.\n", highestPort); 165 fPortCount = highestPort; 166 } 167 168 TRACE("cap: Interface Speed Support: generation %" B_PRIu32 "\n", 169 (fRegs->cap >> CAP_ISS_SHIFT) & CAP_ISS_MASK); 170 TRACE("cap: Number of Command Slots: %d (raw %#" B_PRIx32 ")\n", 171 fCommandSlotCount, (fRegs->cap >> CAP_NCS_SHIFT) & CAP_NCS_MASK); 172 TRACE("cap: Number of Ports: %d (raw %#" B_PRIx32 ")\n", fPortCount, 173 (fRegs->cap >> CAP_NP_SHIFT) & CAP_NP_MASK); 174 TRACE("cap: Supports Port Multiplier: %s\n", 175 (fRegs->cap & CAP_SPM) ? "yes" : "no"); 176 TRACE("cap: Supports External SATA: %s\n", 177 (fRegs->cap & CAP_SXS) ? "yes" : "no"); 178 TRACE("cap: Enclosure Management Supported: %s\n", 179 (fRegs->cap & CAP_EMS) ? "yes" : "no"); 180 181 TRACE("cap: Supports Command List Override: %s\n", 182 (fRegs->cap & CAP_SCLO) ? "yes" : "no"); 183 TRACE("cap: Supports Staggered Spin-up: %s\n", 184 (fRegs->cap & CAP_SSS) ? "yes" : "no"); 185 TRACE("cap: Supports Mechanical Presence Switch: %s\n", 186 (fRegs->cap & CAP_SMPS) ? "yes" : "no"); 187 188 TRACE("cap: Supports 64-bit Addressing: %s\n", 189 (fRegs->cap & CAP_S64A) ? "yes" : "no"); 190 TRACE("cap: Supports Native Command Queuing: %s\n", 191 (fRegs->cap & CAP_SNCQ) ? "yes" : "no"); 192 TRACE("cap: Supports SNotification Register: %s\n", 193 (fRegs->cap & CAP_SSNTF) ? "yes" : "no"); 194 TRACE("cap: Supports Command List Override: %s\n", 195 (fRegs->cap & CAP_SCLO) ? "yes" : "no"); 196 197 TRACE("cap: Supports AHCI mode only: %s\n", (fRegs->cap & CAP_SAM) ? "yes" : "no"); 198 199 if (fRegs->vs >= 0x00010200) { 200 TRACE("cap2: DevSleep Entrance from Slumber Only: %s\n", 201 (fRegs->cap2 & CAP2_DESO) ? "yes" : "no"); 202 TRACE("cap2: Supports Aggressive Device Sleep Management: %s\n", 203 (fRegs->cap2 & CAP2_SADM) ? "yes" : "no"); 204 TRACE("cap2: Supports Device Sleep: %s\n", 205 (fRegs->cap2 & CAP2_SDS) ? "yes" : "no"); 206 TRACE("cap2: Automatic Partial to Slumber Transitions: %s\n", 207 (fRegs->cap2 & CAP2_APST) ? "yes" : "no"); 208 TRACE("cap2: NVMHCI Present: %s\n", 209 (fRegs->cap2 & CAP2_NVMP) ? "yes" : "no"); 210 TRACE("cap2: BIOS/OS Handoff: %s\n", 211 (fRegs->cap2 & CAP2_BOH) ? "yes" : "no"); 212 } 213 TRACE("ghc: AHCI Enable: %s\n", (fRegs->ghc & GHC_AE) ? "yes" : "no"); 214 TRACE("Ports Implemented Mask: %#08" B_PRIx32 " Number of Available Ports:" 215 " %d\n", fPortImplementedMask, count_bits_set(fPortImplementedMask)); 216 TRACE("AHCI Version %02" B_PRIx32 "%02" B_PRIx32 ".%02" B_PRIx32 ".%02" 217 B_PRIx32 " Interrupt %u\n", fRegs->vs >> 24, (fRegs->vs >> 16) & 0xff, 218 (fRegs->vs >> 8) & 0xff, fRegs->vs & 0xff, fIRQ); 219 220 // setup interrupt handler 221 if (install_io_interrupt_handler(fIRQ, Interrupt, this, 0) < B_OK) { 222 TRACE("can't install interrupt handler\n"); 223 goto err; 224 } 225 226 for (int i = 0; i < fPortCount; i++) { 227 if (fPortImplementedMask & (1 << i)) { 228 fPort[i] = new (std::nothrow)AHCIPort(this, i); 229 if (!fPort[i]) { 230 TRACE("out of memory creating port %d\n", i); 231 break; 232 } 233 status_t status = fPort[i]->Init1(); 234 if (status < B_OK) { 235 TRACE("init-1 port %d failed\n", i); 236 delete fPort[i]; 237 fPort[i] = NULL; 238 } 239 } 240 } 241 242 // clear any pending interrupts 243 uint32 interruptsPending; 244 interruptsPending = fRegs->is; 245 fRegs->is = interruptsPending; 246 FlushPostedWrites(); 247 248 // enable interrupts 249 fRegs->ghc |= GHC_IE; 250 FlushPostedWrites(); 251 252 for (int i = 0; i < fPortCount; i++) { 253 if (fPort[i]) { 254 status_t status = fPort[i]->Init2(); 255 if (status < B_OK) { 256 TRACE("init-2 port %d failed\n", i); 257 fPort[i]->Uninit(); 258 delete fPort[i]; 259 fPort[i] = NULL; 260 } 261 } 262 } 263 264 265 return B_OK; 266 267 err: 268 delete_area(fRegsArea); 269 return B_ERROR; 270 } 271 272 273 void 274 AHCIController::Uninit() 275 { 276 TRACE("AHCIController::Uninit\n"); 277 278 for (int i = 0; i < fPortCount; i++) { 279 if (fPort[i]) { 280 fPort[i]->Uninit(); 281 delete fPort[i]; 282 } 283 } 284 285 // disable interrupts 286 fRegs->ghc &= ~GHC_IE; 287 FlushPostedWrites(); 288 289 // clear pending interrupts 290 fRegs->is = 0xffffffff; 291 FlushPostedWrites(); 292 293 // well... 294 remove_io_interrupt_handler(fIRQ, Interrupt, this); 295 296 if (fUseMSI && gPCIx86Module != NULL) { 297 pci_info pciInfo; 298 fPCI->get_pci_info(fPCIDevice, &pciInfo); 299 gPCIx86Module->disable_msi(pciInfo.bus, 300 pciInfo.device, pciInfo.function); 301 gPCIx86Module->unconfigure_msi(pciInfo.bus, 302 pciInfo.device, pciInfo.function); 303 } 304 305 delete_area(fRegsArea); 306 307 // --- Instance check workaround begin 308 delete_port(fInstanceCheck); 309 // --- Instance check workaround end 310 } 311 312 313 status_t 314 AHCIController::ResetController() 315 { 316 uint32 saveCaps = fRegs->cap & (CAP_SMPS | CAP_SSS | CAP_SPM | CAP_EMS | CAP_SXS); 317 uint32 savePI = fRegs->pi; 318 319 // AHCI 1.3: Software may perform an HBA reset prior to initializing the controller 320 // by setting GHC.AE to ‘1’ and then setting GHC.HR to ‘1’ if desired. 321 fRegs->ghc |= GHC_AE; 322 FlushPostedWrites(); 323 fRegs->ghc |= GHC_HR; 324 FlushPostedWrites(); 325 if (wait_until_clear(&fRegs->ghc, GHC_HR, 1000000) < B_OK) 326 return B_TIMED_OUT; 327 328 fRegs->ghc |= GHC_AE; 329 FlushPostedWrites(); 330 fRegs->cap |= saveCaps; 331 fRegs->pi = savePI; 332 FlushPostedWrites(); 333 334 if (fPCIVendorID == PCI_VENDOR_INTEL) { 335 // Intel PCS—Port Control and Status 336 // SATA port enable bits must be set 337 int portCount = std::max(fls(fRegs->pi), 1 + (int)((fRegs->cap >> CAP_NP_SHIFT) & CAP_NP_MASK)); 338 if (portCount > 8) { 339 // TODO: fix this when specification available 340 TRACE("don't know how to enable SATA ports 9 to %d\n", portCount); 341 portCount = 8; 342 } 343 uint16 pcs = fPCI->read_pci_config(fPCIDevice, 0x92, 2); 344 pcs |= (0xff >> (8 - portCount)); 345 fPCI->write_pci_config(fPCIDevice, 0x92, 2, pcs); 346 } 347 return B_OK; 348 } 349 350 351 int32 352 AHCIController::Interrupt(void *data) 353 { 354 AHCIController *self = (AHCIController *)data; 355 uint32 interruptPending = self->fRegs->is & self->fPortImplementedMask; 356 357 if (interruptPending == 0) 358 return B_UNHANDLED_INTERRUPT; 359 360 for (int i = 0; i < self->fPortCount; i++) { 361 if (interruptPending & (1 << i)) { 362 if (self->fPort[i]) { 363 self->fPort[i]->Interrupt(); 364 } else { 365 FLOW("interrupt on non-existent port %d\n", i); 366 } 367 } 368 } 369 370 // clear pending interrupts 371 self->fRegs->is = interruptPending; 372 373 return B_INVOKE_SCHEDULER; 374 } 375 376 377 void 378 AHCIController::ExecuteRequest(scsi_ccb *request) 379 { 380 if (request->target_lun || !fPort[request->target_id]) { 381 request->subsys_status = SCSI_DEV_NOT_THERE; 382 gSCSI->finished(request, 1); 383 return; 384 } 385 386 fPort[request->target_id]->ScsiExecuteRequest(request); 387 } 388 389 390 uchar 391 AHCIController::AbortRequest(scsi_ccb *request) 392 { 393 if (request->target_lun || !fPort[request->target_id]) 394 return SCSI_DEV_NOT_THERE; 395 396 return fPort[request->target_id]->ScsiAbortRequest(request); 397 } 398 399 400 uchar 401 AHCIController::TerminateRequest(scsi_ccb *request) 402 { 403 if (request->target_lun || !fPort[request->target_id]) 404 return SCSI_DEV_NOT_THERE; 405 406 return fPort[request->target_id]->ScsiTerminateRequest(request); 407 } 408 409 410 uchar 411 AHCIController::ResetDevice(uchar targetID, uchar targetLUN) 412 { 413 if (targetLUN || !fPort[targetID]) 414 return SCSI_DEV_NOT_THERE; 415 416 return fPort[targetID]->ScsiResetDevice(); 417 } 418 419 420 void 421 AHCIController::GetRestrictions(uchar targetID, bool *isATAPI, 422 bool *noAutoSense, uint32 *maxBlocks) 423 { 424 if (!fPort[targetID]) 425 return; 426 427 fPort[targetID]->ScsiGetRestrictions(isATAPI, noAutoSense, maxBlocks); 428 } 429