| /haiku/src/kits/media/ |
| H A D | EncoderPlugin.cpp | 6780c24d36ada936c1d3a1095d2ed9730ef1e0c7 Wed Aug 05 10:21:36 UTC 2009 Stephan Aßmus <superstippi@gmx.de> Encoder:
* Fleshed out the Encoder API to support parameter setters/getters and returning
a BView for configuration. (Not yet sure if this is a good idea.)
BMediaTrack:
* Implemented all but one of the unimplemented methods in BMediaTrack. It should
be working as far as that class is concerned, unless I missed some of the
vision. ReplaceFrames() remains a stub, added a comment on why it probably
stays that way.
* Release the Encoder reference in the destructor.
FFmpeg plugin:
* Refactoring to delay opening the AVCodec until encoding the first chunk,
so that we can still adjust parameters.
* Support adjusting parameters via [Set|Get]EncodeParameters(). Currently,
only quality is supported, added TODOs about supporting the bit_rate setup
versus the automatically calculated bit_rate.
* Extended EncoderDescription by a bit_rate scale. The Encoder calculates the
raw bitrate needed by the current media format, and then divides that
number by the specific codec's bit_rate_scale, while taking into account the
desired quality. This seems to work very well already (tested with MPEG4),
although a lot more parameters could be specified for libavcodec, depending
on the desired quality.
* Enabled the ogg muxer in libavformat, although it is currently still disabled
in MuxerTable.cpp, because it rejects unknown codecs. Added TODO to this
effect.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32124 a95241bf-73f2-0310-859d-f6bbb57e9c96
|
| H A D | MediaTrack.cpp | 6780c24d36ada936c1d3a1095d2ed9730ef1e0c7 Wed Aug 05 10:21:36 UTC 2009 Stephan Aßmus <superstippi@gmx.de> Encoder:
* Fleshed out the Encoder API to support parameter setters/getters and returning
a BView for configuration. (Not yet sure if this is a good idea.)
BMediaTrack:
* Implemented all but one of the unimplemented methods in BMediaTrack. It should
be working as far as that class is concerned, unless I missed some of the
vision. ReplaceFrames() remains a stub, added a comment on why it probably
stays that way.
* Release the Encoder reference in the destructor.
FFmpeg plugin:
* Refactoring to delay opening the AVCodec until encoding the first chunk,
so that we can still adjust parameters.
* Support adjusting parameters via [Set|Get]EncodeParameters(). Currently,
only quality is supported, added TODOs about supporting the bit_rate setup
versus the automatically calculated bit_rate.
* Extended EncoderDescription by a bit_rate scale. The Encoder calculates the
raw bitrate needed by the current media format, and then divides that
number by the specific codec's bit_rate_scale, while taking into account the
desired quality. This seems to work very well already (tested with MPEG4),
although a lot more parameters could be specified for libavcodec, depending
on the desired quality.
* Enabled the ogg muxer in libavformat, although it is currently still disabled
in MuxerTable.cpp, because it rejects unknown codecs. Added TODO to this
effect.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32124 a95241bf-73f2-0310-859d-f6bbb57e9c96
|
| /haiku/src/add-ons/media/plugins/ffmpeg/ |
| H A D | EncoderTable.h | 6780c24d36ada936c1d3a1095d2ed9730ef1e0c7 Wed Aug 05 10:21:36 UTC 2009 Stephan Aßmus <superstippi@gmx.de> Encoder:
* Fleshed out the Encoder API to support parameter setters/getters and returning
a BView for configuration. (Not yet sure if this is a good idea.)
BMediaTrack:
* Implemented all but one of the unimplemented methods in BMediaTrack. It should
be working as far as that class is concerned, unless I missed some of the
vision. ReplaceFrames() remains a stub, added a comment on why it probably
stays that way.
* Release the Encoder reference in the destructor.
FFmpeg plugin:
* Refactoring to delay opening the AVCodec until encoding the first chunk,
so that we can still adjust parameters.
* Support adjusting parameters via [Set|Get]EncodeParameters(). Currently,
only quality is supported, added TODOs about supporting the bit_rate setup
versus the automatically calculated bit_rate.
* Extended EncoderDescription by a bit_rate scale. The Encoder calculates the
raw bitrate needed by the current media format, and then divides that
number by the specific codec's bit_rate_scale, while taking into account the
desired quality. This seems to work very well already (tested with MPEG4),
although a lot more parameters could be specified for libavcodec, depending
on the desired quality.
* Enabled the ogg muxer in libavformat, although it is currently still disabled
in MuxerTable.cpp, because it rejects unknown codecs. Added TODO to this
effect.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32124 a95241bf-73f2-0310-859d-f6bbb57e9c96
|
| H A D | EncoderTable.cpp | 6780c24d36ada936c1d3a1095d2ed9730ef1e0c7 Wed Aug 05 10:21:36 UTC 2009 Stephan Aßmus <superstippi@gmx.de> Encoder:
* Fleshed out the Encoder API to support parameter setters/getters and returning
a BView for configuration. (Not yet sure if this is a good idea.)
BMediaTrack:
* Implemented all but one of the unimplemented methods in BMediaTrack. It should
be working as far as that class is concerned, unless I missed some of the
vision. ReplaceFrames() remains a stub, added a comment on why it probably
stays that way.
* Release the Encoder reference in the destructor.
FFmpeg plugin:
* Refactoring to delay opening the AVCodec until encoding the first chunk,
so that we can still adjust parameters.
* Support adjusting parameters via [Set|Get]EncodeParameters(). Currently,
only quality is supported, added TODOs about supporting the bit_rate setup
versus the automatically calculated bit_rate.
* Extended EncoderDescription by a bit_rate scale. The Encoder calculates the
raw bitrate needed by the current media format, and then divides that
number by the specific codec's bit_rate_scale, while taking into account the
desired quality. This seems to work very well already (tested with MPEG4),
although a lot more parameters could be specified for libavcodec, depending
on the desired quality.
* Enabled the ogg muxer in libavformat, although it is currently still disabled
in MuxerTable.cpp, because it rejects unknown codecs. Added TODO to this
effect.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32124 a95241bf-73f2-0310-859d-f6bbb57e9c96
|
| H A D | FFmpegPlugin.cpp | 6780c24d36ada936c1d3a1095d2ed9730ef1e0c7 Wed Aug 05 10:21:36 UTC 2009 Stephan Aßmus <superstippi@gmx.de> Encoder:
* Fleshed out the Encoder API to support parameter setters/getters and returning
a BView for configuration. (Not yet sure if this is a good idea.)
BMediaTrack:
* Implemented all but one of the unimplemented methods in BMediaTrack. It should
be working as far as that class is concerned, unless I missed some of the
vision. ReplaceFrames() remains a stub, added a comment on why it probably
stays that way.
* Release the Encoder reference in the destructor.
FFmpeg plugin:
* Refactoring to delay opening the AVCodec until encoding the first chunk,
so that we can still adjust parameters.
* Support adjusting parameters via [Set|Get]EncodeParameters(). Currently,
only quality is supported, added TODOs about supporting the bit_rate setup
versus the automatically calculated bit_rate.
* Extended EncoderDescription by a bit_rate scale. The Encoder calculates the
raw bitrate needed by the current media format, and then divides that
number by the specific codec's bit_rate_scale, while taking into account the
desired quality. This seems to work very well already (tested with MPEG4),
although a lot more parameters could be specified for libavcodec, depending
on the desired quality.
* Enabled the ogg muxer in libavformat, although it is currently still disabled
in MuxerTable.cpp, because it rejects unknown codecs. Added TODO to this
effect.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32124 a95241bf-73f2-0310-859d-f6bbb57e9c96
|
| H A D | MuxerTable.cpp | 6780c24d36ada936c1d3a1095d2ed9730ef1e0c7 Wed Aug 05 10:21:36 UTC 2009 Stephan Aßmus <superstippi@gmx.de> Encoder:
* Fleshed out the Encoder API to support parameter setters/getters and returning
a BView for configuration. (Not yet sure if this is a good idea.)
BMediaTrack:
* Implemented all but one of the unimplemented methods in BMediaTrack. It should
be working as far as that class is concerned, unless I missed some of the
vision. ReplaceFrames() remains a stub, added a comment on why it probably
stays that way.
* Release the Encoder reference in the destructor.
FFmpeg plugin:
* Refactoring to delay opening the AVCodec until encoding the first chunk,
so that we can still adjust parameters.
* Support adjusting parameters via [Set|Get]EncodeParameters(). Currently,
only quality is supported, added TODOs about supporting the bit_rate setup
versus the automatically calculated bit_rate.
* Extended EncoderDescription by a bit_rate scale. The Encoder calculates the
raw bitrate needed by the current media format, and then divides that
number by the specific codec's bit_rate_scale, while taking into account the
desired quality. This seems to work very well already (tested with MPEG4),
although a lot more parameters could be specified for libavcodec, depending
on the desired quality.
* Enabled the ogg muxer in libavformat, although it is currently still disabled
in MuxerTable.cpp, because it rejects unknown codecs. Added TODO to this
effect.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32124 a95241bf-73f2-0310-859d-f6bbb57e9c96
|
| H A D | AVCodecEncoder.h | 6780c24d36ada936c1d3a1095d2ed9730ef1e0c7 Wed Aug 05 10:21:36 UTC 2009 Stephan Aßmus <superstippi@gmx.de> Encoder:
* Fleshed out the Encoder API to support parameter setters/getters and returning
a BView for configuration. (Not yet sure if this is a good idea.)
BMediaTrack:
* Implemented all but one of the unimplemented methods in BMediaTrack. It should
be working as far as that class is concerned, unless I missed some of the
vision. ReplaceFrames() remains a stub, added a comment on why it probably
stays that way.
* Release the Encoder reference in the destructor.
FFmpeg plugin:
* Refactoring to delay opening the AVCodec until encoding the first chunk,
so that we can still adjust parameters.
* Support adjusting parameters via [Set|Get]EncodeParameters(). Currently,
only quality is supported, added TODOs about supporting the bit_rate setup
versus the automatically calculated bit_rate.
* Extended EncoderDescription by a bit_rate scale. The Encoder calculates the
raw bitrate needed by the current media format, and then divides that
number by the specific codec's bit_rate_scale, while taking into account the
desired quality. This seems to work very well already (tested with MPEG4),
although a lot more parameters could be specified for libavcodec, depending
on the desired quality.
* Enabled the ogg muxer in libavformat, although it is currently still disabled
in MuxerTable.cpp, because it rejects unknown codecs. Added TODO to this
effect.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32124 a95241bf-73f2-0310-859d-f6bbb57e9c96
|
| H A D | AVCodecEncoder.cpp | 6780c24d36ada936c1d3a1095d2ed9730ef1e0c7 Wed Aug 05 10:21:36 UTC 2009 Stephan Aßmus <superstippi@gmx.de> Encoder:
* Fleshed out the Encoder API to support parameter setters/getters and returning
a BView for configuration. (Not yet sure if this is a good idea.)
BMediaTrack:
* Implemented all but one of the unimplemented methods in BMediaTrack. It should
be working as far as that class is concerned, unless I missed some of the
vision. ReplaceFrames() remains a stub, added a comment on why it probably
stays that way.
* Release the Encoder reference in the destructor.
FFmpeg plugin:
* Refactoring to delay opening the AVCodec until encoding the first chunk,
so that we can still adjust parameters.
* Support adjusting parameters via [Set|Get]EncodeParameters(). Currently,
only quality is supported, added TODOs about supporting the bit_rate setup
versus the automatically calculated bit_rate.
* Extended EncoderDescription by a bit_rate scale. The Encoder calculates the
raw bitrate needed by the current media format, and then divides that
number by the specific codec's bit_rate_scale, while taking into account the
desired quality. This seems to work very well already (tested with MPEG4),
although a lot more parameters could be specified for libavcodec, depending
on the desired quality.
* Enabled the ogg muxer in libavformat, although it is currently still disabled
in MuxerTable.cpp, because it rejects unknown codecs. Added TODO to this
effect.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32124 a95241bf-73f2-0310-859d-f6bbb57e9c96
|
| /haiku/headers/private/media/ |
| H A D | EncoderPlugin.h | 6780c24d36ada936c1d3a1095d2ed9730ef1e0c7 Wed Aug 05 10:21:36 UTC 2009 Stephan Aßmus <superstippi@gmx.de> Encoder:
* Fleshed out the Encoder API to support parameter setters/getters and returning
a BView for configuration. (Not yet sure if this is a good idea.)
BMediaTrack:
* Implemented all but one of the unimplemented methods in BMediaTrack. It should
be working as far as that class is concerned, unless I missed some of the
vision. ReplaceFrames() remains a stub, added a comment on why it probably
stays that way.
* Release the Encoder reference in the destructor.
FFmpeg plugin:
* Refactoring to delay opening the AVCodec until encoding the first chunk,
so that we can still adjust parameters.
* Support adjusting parameters via [Set|Get]EncodeParameters(). Currently,
only quality is supported, added TODOs about supporting the bit_rate setup
versus the automatically calculated bit_rate.
* Extended EncoderDescription by a bit_rate scale. The Encoder calculates the
raw bitrate needed by the current media format, and then divides that
number by the specific codec's bit_rate_scale, while taking into account the
desired quality. This seems to work very well already (tested with MPEG4),
although a lot more parameters could be specified for libavcodec, depending
on the desired quality.
* Enabled the ogg muxer in libavformat, although it is currently still disabled
in MuxerTable.cpp, because it rejects unknown codecs. Added TODO to this
effect.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32124 a95241bf-73f2-0310-859d-f6bbb57e9c96
|