/* * Copyright 2012-2022, Haiku, Inc. All rights reserved. * Distributed under the terms of the MIT License. * * Authors: * Ithamar R. Adema */ #include #include #include #include #include #include #include #include #include #include #include #define TRACE_CPU #ifdef TRACE_CPU # define TRACE(x...) dprintf(x) #else # define TRACE(x...) ; #endif /*! Detect ARM core version and features. Please note the fact that ARM7 and ARMv7 are two different things ;) ARMx is a specific ARM CPU core instance, while ARMvX refers to the ARM architecture specification version.... Most of the architecture versions we're detecting here we will probably never run on, just included for completeness sake... ARMv5 and up are the likely ones for us to support (as they all have some kind of MMU). */ static status_t check_cpu_features() { uint32 result = 0; int arch = 0; int variant = 0; int part = 0; int revision = 0; int implementor = 0; asm volatile("MRC p15, 0, %[c1out], c0, c0, 0":[c1out] "=r" (result)); implementor = (result >> 24) & 0xff; switch ((result >> 12) & 0xf) { case 0: /* early ARMv3 or even older */ arch = ARCH_ARM_PRE_ARM7; break; case 7: /* ARM7 processor */ arch = (result & (1 << 23)) ? ARCH_ARM_v4T : ARCH_ARM_v3; variant = (result >> 16) & 0x7f; part = (result >> 4) & 0xfff; revision = result & 0xf; break; default: revision = result & 0xf; part = (result >> 4) & 0xfff; switch((result >> 16) & 0xf) { case 1: arch = ARCH_ARM_v4; break; case 2: arch = ARCH_ARM_v4T; break; case 3: arch = ARCH_ARM_v5; break; case 4: arch = ARCH_ARM_v5T; break; case 5: arch = ARCH_ARM_v5TE; break; case 6: arch = ARCH_ARM_v5TEJ; break; case 7: arch = ARCH_ARM_v6; break; case 0xf: arch = ARCH_ARM_v7; // TODO ... or later. We apparently need to scan the // CPUID registers to decide. break; } variant = (result >> 20) & 0xf; break; } TRACE("%s: implementor=0x%x('%c'), arch=%d, variant=0x%x, part=0x%x, revision=0x%x\n", __func__, implementor, implementor, arch, variant, part, revision); return (arch < ARCH_ARM_v5) ? B_ERROR : B_OK; } status_t boot_arch_cpu_init(void) { status_t err = check_cpu_features(); if (err != B_OK) { panic("Retire your old Acorn and get something modern to boot!\n"); return err; } return B_OK; } void arch_ucode_load(BootVolume& volume) { // NOP on arm currently }