/*
	Copyright (c) 2003, Thomas Kurschel


	Part of DDC driver
		
	Main DDC communication
*/

#include <OS.h>
#include <KernelExport.h>
#include <stdlib.h>
#include "ddc_int.h"
#include "ddc.h"

#include "i2c.h"

// number of retries to read ddc data
#define READ_RETRIES 4

// verify checksum of ddc data
// (some monitors have a broken checksum - bad luck for them)
static status_t verify_checksum( const uint8 *data, size_t len )
{
	int i;
	uint8 sum = 0;
	uint8 all_or = 0;
	
	for( i = 0; i < len; ++i, ++data ) {
		sum += *data;
		all_or |= *data;
	}
	
	if( all_or == 0 ) {
		SHOW_ERROR0( 2, "DDC information contains zeros only" );
		return B_ERROR;
	}
	
	if( sum != 0 ) {
		SHOW_ERROR0( 2, "Checksum error of DDC information" );
		return B_IO_ERROR;
	}
		
	return B_OK;
}

// read ddc2 data from monitor
static status_t ddc2_read( const i2c_bus *bus, int start, uint8 *buffer, size_t len )
{
	uint8 write_buffer[2];
	i2c_timing timing;
	int i;
	status_t res;

	write_buffer[0] = start & 0xff;	
	write_buffer[1] = (start >> 8) & 0xff;

	i2c_get100k_timing( &timing );
	
	timing.start_timeout = 550;
	timing.byte_timeout = 2200;
	timing.bit_timeout = 40;
	timing.ack_start_timeout = 40;
	timing.ack_timeout = 40;
	
	for( i = 0; i < READ_RETRIES; ++i ) {
		res = i2c_send_receive( bus, &timing, 
			0xa0, write_buffer, start < 0x100 ? 1 : 2, 
			buffer, len );
		// don't verify checksum - it's often broken
		if( res == B_OK /*&& verify_checksum( buffer, len ) == B_OK*/ )
			break;
			
		res = B_ERROR;
	}
	
	return res;
}


// reading VDIF has not been tested. 
// it seems that almost noone supports VDIF which makes testing hard,
// but what's the point anyway?
#if 0
static status_t ddc2_read_vdif( const i2c_bus *bus, int start, 
	void **vdif, size_t *vdif_len )
{
	status_t res;
	uint8 *data, *cur_data;
	int i;
	uint8 buffer[64];
	
	*vdif = NULL;
	*vdif_len = 0;
	
	res = ddc2_read( bus, start, buffer, 64 );
	SHOW_INFO( 2, "%x", buffer[0] );
	if( res != B_OK || buffer[0] == 0 )
		return B_OK;
	
	// each block is 63 bytes plus 1 checksum long
	// we strip the checksum but store data directly into
	// buffer, so we need an extra byte for checksum of the last block
	data = malloc( buffer[0] * 63 + 1 );
	if( data == NULL )
		return B_NO_MEMORY;
		
	cur_data = data;
	for( i = 0; i < buffer[0]; ++i ) {
		ddc2_read( bus, start + i * 64, cur_data, 64 );
		// strip checksum byte
		cur_data += 63;
	}

	*vdif_len = buffer[0] * 63;
	*vdif = data;
	return B_OK;
}
#endif

// read EDID and VDIF from monitor via ddc2
status_t ddc2_read_edid1( const i2c_bus *bus, edid1_info *edid, 
	void **vdif, size_t *vdif_len )
{
	status_t res;
	edid1_raw raw;

	res = ddc2_read( bus, 0, (uint8 *)&raw, sizeof( raw ));
	if( res != B_OK )
		return res;
	
	edid_decode( edid, &raw );
	
	*vdif = NULL;
	*vdif_len = 0;

	// skip vdif as long as it's not tested	
#if 0	
	res = ddc2_read_vdif( bus, sizeof( raw ) * (edid->num_sections + 1),
		vdif, vdif_len );
	if( res != B_OK )
		return res;
#endif
		
	return B_OK;
}